*** empty log message ***

1 files changed, 666 insertions, 0 deletions

diff --git a/etc/cs-refcard.tex b/etc/cs-refcard.tex
new file mode 100644
index 0000000000..3ee6977e7a
--- /dev/null
+++ b/etc/cs-refcard.tex
@@ -0,0 +1,666 @@
+% Reference Card for GNU Emacs version 20 on Unix systems
+
+% Czech hyphenation rules applied
+\chyph
+
+%**start of header
+\newcount\columnsperpage
+
+% This file can be printed with 1, 2, or 3 columns per page (see below).
+% Specify how many you want here.  Nothing else needs to be changed.
+
+\columnsperpage=1
+
+% Copyright (c) 1987, 1993, 1996, 1997 Free Software Foundation, Inc.
+
+% This file is part of GNU Emacs.
+
+% GNU Emacs is free software; you can redistribute it and/or modify
+% it under the terms of the GNU General Public License as published by
+% the Free Software Foundation; either version 2, or (at your option)
+% any later version.
+
+% GNU Emacs is distributed in the hope that it will be useful,
+% but WITHOUT ANY WARRANTY; without even the implied warranty of
+% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+% GNU General Public License for more details.
+
+% You should have received a copy of the GNU General Public License
+% along with GNU Emacs; see the file COPYING.  If not, write to
+% the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+% Boston, MA 02111-1307, USA.
+
+% This file is intended to be processed by plain TeX (TeX82).
+%
+% The final reference card has six columns, three on each side.
+% This file can be used to produce it in any of three ways:
+% 1 column per page
+%    produces six separate pages, each of which needs to be reduced to 80%.
+%    This gives the best resolution.
+% 2 columns per page
+%    produces three already-reduced pages.
+%    You will still need to cut and paste.
+% 3 columns per page
+%    produces two pages which must be printed sideways to make a
+%    ready-to-use 8.5 x 11 inch reference card.
+%    For this you need a dvi device driver that can print sideways.
+% Which mode to use is controlled by setting \columnsperpage above.
+%
+% Author:
+%  Stephen Gildea
+%  Internet: [email protected]
+%
+% Thanks to Paul Rubin, Bob Chassell, Len Tower, and Richard Mlynarik
+% for their many good ideas.
+
+% If there were room, it would be nice to see a section on Dired.
+
+% Translated to Czech by Jan Buchal <[email protected]> in January 1999
+% Corrections and improvements of the translation
+% by Milan Zamazal <[email protected]> in August 1999
+% More work on better integration with GNU Emacs 21
+% by Pavel Jan�k <[email protected]> in November 2000
+
+% Process the file with `csplain' from the `CSTeX' distribution (included
+% e.g. in the TeX Live CD).
+
+\def\versionnumber{2.2}
+\def\year{1997}
+
+\def\shortcopyrightnotice{\vskip 1ex plus 2 fill
+  \centerline{\small \copyright\ \year\ Free Software Foundation, Inc.
+  Permissions on back.  v\versionnumber}}
+
+\def\copyrightnotice{
+\vskip 1ex plus 2 fill\begingroup\small
+\centerline{Copyright \copyright\ \year\ Free Software Foundation, Inc.}
+\centerline{v\versionnumber{} for GNU Emacs version 20, June \year}
+\centerline{designed by Stephen Gildea}
+
+Permission is granted to make and distribute copies of
+this card provided the copyright notice and this permission notice
+are preserved on all copies.
+
+For copies of the GNU Emacs manual, write to the Free Software
+Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+\endgroup}
+
+% make \bye not \outer so that the \def\bye in the \else clause below
+% can be scanned without complaint.
+\def\bye{\par\vfill\supereject\end}
+
+\newdimen\intercolumnskip	%horizontal space between columns
+\newbox\columna			%boxes to hold columns already built
+\newbox\columnb
+
+\def\ncolumns{\the\columnsperpage}
+
+\message{[\ncolumns\space 
+  column\if 1\ncolumns\else s\fi\space per page]}
+
+\def\scaledmag#1{ scaled \magstep #1}
+
+% This multi-way format was designed by Stephen Gildea October 1986.
+% Note that the 1-column format is fontfamily-independent.
+\if 1\ncolumns			%one-column format uses normal size
+  \hsize 4in
+  \vsize 10in
+  \voffset -.7in
+  \font\titlefont=\fontname\tenbf \scaledmag3
+  \font\headingfont=\fontname\tenbf \scaledmag2
+  \font\smallfont=\fontname\sevenrm
+  \font\smallsy=\fontname\sevensy
+
+  \footline{\hss\folio}
+  \def\makefootline{\baselineskip10pt\hsize6.5in\line{\the\footline}}
+\else				%2 or 3 columns uses prereduced size
+  \hsize 3.2in
+  \vsize 7.95in
+  \hoffset -.75in
+  \voffset -.745in
+  \font\titlefont=csbx10 \scaledmag2
+  \font\headingfont=csbx10 \scaledmag1
+  \font\smallfont=csr6
+  \font\smallsy=cmsy6
+  \font\eightrm=csr8
+  \font\eightbf=csbx8
+  \font\eightit=csti8
+  \font\eighttt=cstt8
+  \font\eightmi=cmmi8
+  \font\eightsy=cmsy8
+  \textfont0=\eightrm
+  \textfont1=\eightmi
+  \textfont2=\eightsy
+  \def\rm{\eightrm}
+  \def\bf{\eightbf}
+  \def\it{\eightit}
+  \def\tt{\eighttt}
+  \normalbaselineskip=.8\normalbaselineskip
+  \normallineskip=.8\normallineskip
+  \normallineskiplimit=.8\normallineskiplimit
+  \normalbaselines\rm		%make definitions take effect
+
+  \if 2\ncolumns
+    \let\maxcolumn=b
+    \footline{\hss\rm\folio\hss}
+    \def\makefootline{\vskip 2in \hsize=6.86in\line{\the\footline}}
+  \else \if 3\ncolumns
+    \let\maxcolumn=c
+    \nopagenumbers
+  \else
+    \errhelp{You must set \columnsperpage equal to 1, 2, or 3.}
+    \errmessage{Illegal number of columns per page}
+  \fi\fi
+
+  \intercolumnskip=.46in
+  \def\abc{a}
+  \output={%			%see The TeXbook page 257
+      % This next line is useful when designing the layout.
+      %\immediate\write16{Column \folio\abc\space starts with \firstmark}
+      \if \maxcolumn\abc \multicolumnformat \global\def\abc{a}
+      \else\if a\abc
+	\global\setbox\columna\columnbox \global\def\abc{b}
+        %% in case we never use \columnb (two-column mode)
+        \global\setbox\columnb\hbox to -\intercolumnskip{}
+      \else
+	\global\setbox\columnb\columnbox \global\def\abc{c}\fi\fi}
+  \def\multicolumnformat{\shipout\vbox{\makeheadline
+      \hbox{\box\columna\hskip\intercolumnskip
+        \box\columnb\hskip\intercolumnskip\columnbox}
+      \makefootline}\advancepageno}
+  \def\columnbox{\leftline{\pagebody}}
+
+  \def\bye{\par\vfill\supereject
+    \if a\abc \else\null\vfill\eject\fi
+    \if a\abc \else\null\vfill\eject\fi
+    \end}  
+\fi
+
+% we won't be using math mode much, so redefine some of the characters
+% we might want to talk about
+\catcode`\^=12
+\catcode`\_=12
+
+\chardef\\=`\\
+\chardef\{=`\{
+\chardef\}=`\}
+
+\hyphenation{mini-buf-fer}
+
+\parindent 0pt
+\parskip 1ex plus .5ex minus .5ex
+
+\def\small{\smallfont\textfont2=\smallsy\baselineskip=.8\baselineskip}
+
+% newcolumn - force a new column.  Use sparingly, probably only for
+% the first column of a page, which should have a title anyway.
+\outer\def\newcolumn{\vfill\eject}
+
+% title - page title.  Argument is title text.
+\outer\def\title#1{{\titlefont\centerline{#1}}\vskip 1ex plus .5ex}
+
+% section - new major section.  Argument is section name.
+\outer\def\section#1{\par\filbreak
+  \vskip 3ex plus 2ex minus 2ex {\headingfont #1}\mark{#1}%
+  \vskip 2ex plus 1ex minus 1.5ex}
+
+\newdimen\keyindent
+
+% beginindentedkeys...endindentedkeys - key definitions will be
+% indented, but running text, typically used as headings to group
+% definitions, will not.
+\def\beginindentedkeys{\keyindent=1em}
+\def\endindentedkeys{\keyindent=0em}
+\endindentedkeys
+
+% paralign - begin paragraph containing an alignment.
+% If an \halign is entered while in vertical mode, a parskip is never
+% inserted.  Using \paralign instead of \halign solves this problem.
+\def\paralign{\vskip\parskip\halign}
+
+% \<...> - surrounds a variable name in a code example
+\def\<#1>{{\it #1\/}}
+
+% kbd - argument is characters typed literally.  Like the Texinfo command.
+\def\kbd#1{{\tt#1}\null}	%\null so not an abbrev even if period follows
+
+% beginexample...endexample - surrounds literal text, such a code example.
+% typeset in a typewriter font with line breaks preserved
+\def\beginexample{\par\leavevmode\begingroup
+  \obeylines\obeyspaces\parskip0pt\tt}
+{\obeyspaces\global\let =\ }
+\def\endexample{\endgroup}
+
+% key - definition of a key.
+% \key{description of key}{key-name}
+% prints the description left-justified, and the key-name in a \kbd
+% form near the right margin.
+\def\key#1#2{\leavevmode\hbox to \hsize{\vtop
+  {\hsize=.75\hsize\rightskip=1em
+  \hskip\keyindent\relax#1}\kbd{#2}\hfil}}
+
+\newbox\metaxbox
+\setbox\metaxbox\hbox{\kbd{M-x }}
+\newdimen\metaxwidth
+\metaxwidth=\wd\metaxbox
+
+% metax - definition of a M-x command.
+% \metax{description of command}{M-x command-name}
+% Tries to justify the beginning of the command name at the same place
+% as \key starts the key name.  (The "M-x " sticks out to the left.)
+\def\metax#1#2{\leavevmode\hbox to \hsize{\hbox to .75\hsize
+  {\hskip\keyindent\relax#1\hfil}%
+  \hskip -\metaxwidth minus 1fil
+  \kbd{#2}\hfil}}
+
+% threecol - like "key" but with two key names.
+% for example, one for doing the action backward, and one for forward.
+\def\threecol#1#2#3{\hskip\keyindent\relax#1\hfil&\kbd{#2}\hfil\quad
+  &\kbd{#3}\hfil\quad\cr}
+
+%**end of header
+
+
+\title{GNU Emacs -- Referen�n� karta}
+
+\centerline{(pro verzi 20)}
+
+\section{Spu�t�n� Emacsu}
+
+Pro vstup do GNU~Emacsu~20 napi�te jeho jm�no: \kbd{emacs}
+
+Jak na��tat a editovat soubory se dozv�te n��e v~odd�le Soubory.
+
+
+\section{Opu�t�n� Emacsu}
+
+\key{pozastaven� Emacsu (ikonizace v~X11)}{C-z}
+\key{definitivn� odchod z~Emacsu}{C-x C-c}
+
+\section{Soubory}
+
+\key{{\bf na��st} souboru do Emacsu}{C-x C-f}
+\key{{\bf ulo�it} soubor zp�t na disk}{C-x C-s}
+\key{ulo�it {\bf v�echny} soubory}{C-x s}
+\key{{\bf vlo�it} obsahu jin�ho souboru do bufferu}{C-x i}
+\key{zam�nit tento soubor jin�m souborem}{C-x C-v}
+\key{zapsat buffer do zadan�ho souboru}{C-x C-w}
+\key{vlo�it do syst�mu spr�vy verz�}{C-x C-q}
+
+\section{Pou��v�n� n�pov�dy}
+
+Syst�m n�pov�dy je snadn�. Stiskn�te \kbd{C-h} (nebo \kbd{F1}) a sledujte
+instrukce. �vodn� {\bf tutori�l} lze spustit pomoc� \kbd{C-h t}.
+
+\key{odstranit okno s~n�pov�dou}{C-x 1}
+\key{rolovat okno s~n�pov�dou}{C-M-v}
+
+\key{apropos: p��kazy odpov�daj�c� �et�zci}{C-h a}
+\key{zobrazit funkci dan� kl�vesy}{C-h c}
+\key{zobrazit popis funkce}{C-h f}
+\key{zobrazit informace o~aktu�ln�ch m�dech}{C-h m}
+
+\section{Opravy chyb}
+
+\key{{\bf p�eru�it} zad�van� nebo vykon�van� p��kaz}{C-g}
+\metax{{\bf obnovit} soubor ztracen� p�dem syst�mu}{M-x recover-file}
+\key{{\bf zru�it} necht�nou zm�nu}{C-x u {\it n.} C-_}
+\metax{vr�tit p�vodn� obsah bufferu}{M-x revert-buffer}
+\key{p�ekreslit \uv{rozpadlou} obrazovku}{C-l}
+
+\section{P��r�stkov� vyhled�v�n�}
+
+\key{vyhledat dop�edu}{C-s}
+\key{vyhledat dozadu}{C-r}
+\key{vyhledat regul�rn� v�raz}{C-M-s}
+\key{vyhledat regul�rn� v�raz dozadu}{C-M-r}
+
+\key{p�edchoz� vyhled�van� �et�zec}{M-p}
+\key{n�sleduj�c� nov�j�� vyhled�van� �et�zec}{M-n}
+\key{ukon�it inkrement�ln� vyhled�v�n�}{RET}
+\key{zru�it efekt posledn�ho zadan�ho znaku}{DEL}
+\key{p�eru�it prob�haj�c� vyhled�v�n�}{C-g}
+
+Dal�� \kbd{C-s} nebo \kbd{C-r} zopakuje vyhled�n� v~dan�m sm�ru. Pokud
+Emacs vyhled�v�, \kbd{C-g} zru�� pouze nenalezenou ��st �et�zce.
+
+
+\shortcopyrightnotice
+
+\section{Pohyb}
+
+\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
+\threecol{{\bf posun o }}{{\bf dozadu}}{{\bf dop�edu}}
+\threecol{znak}{C-b}{C-f}
+\threecol{slovo}{M-b}{M-f}
+\threecol{��dek}{C-p}{C-n}
+\threecol{na za��tek nebo konec ��dku}{C-a}{C-e}
+\threecol{v�tu}{M-a}{M-e}
+\threecol{odstavec}{M-\{}{M-\}}
+\threecol{str�nku}{C-x [}{C-x ]}
+\threecol{symbolick� v�raz}{C-M-b}{C-M-f}
+\threecol{funkci}{C-M-a}{C-M-e}
+\threecol{na za��tek nebo konec bufferu}{M-<}{M->}
+}
+
+\key{rolovat na dal�� obrazovku}{C-v}
+\key{rolovat na p�edchoz� obrazovku}{M-v}
+\key{rolovat vlevo}{C-x <}
+\key{rolovat vpravo}{C-x >}
+\key{aktu�ln� ��dek do st�edu obrazovky}{C-u C-l}
+
+\section{Ru�en� a maz�n�}
+
+\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
+\threecol{{\bf ru�en� objekt }}{{\bf dozadu}}{{\bf dop�edu}}
+\threecol{znak (maz�n�, ne ru�en�)}{DEL}{C-d}
+\threecol{slovo}{M-DEL}{M-d}
+\threecol{��dek (do konce)}{M-0 C-k}{C-k}
+\threecol{v�ta}{C-x DEL}{M-k}
+\threecol{symbolick� v�raz}{M-- C-M-k}{C-M-k}
+}
+
+\key{zru�it {\bf oblast}}{C-w}
+\key{zkop�rovat oblast do schr�nky}{M-w}
+\key{zru�it a� po nejbli��� v�skyt znaku {\it znak}}{M-z {\it znak}}
+
+\key{vhodit naposledy zru�en� objekt}{C-y}
+\key{nahradit vhozen� objekt p�edchoz�m zru�en�m}{M-y}
+
+\section{Ozna�ov�n�}
+
+\key{vlo�it zna�ku}{C-@ {\it n.} C-SPC}
+\key{prohodit kurzor a zna�ku}{C-x C-x}
+
+\key{ozna�it zadan� po�et {\bf slov}}{M-@}
+\key{ozna�it {\bf odstavec}}{M-h}
+\key{ozna�it {\bf str�nku}}{C-x C-p}
+\key{ozna�it {\bf symbolick� v�raz}}{C-M-@}
+\key{ozna�it {\bf funkci}}{C-M-h}
+\key{ozna�it cel� {\bf buffer}}{C-x h}
+
+\section{Interaktivn� nahrazov�n�}
+
+\key{interaktivn� nahradit textov� �et�zec}{M-\%}
+\metax{s~u�it�m regul�rn�ho v�razu}{M-x query-replace-regexp}
+
+Platn� odpov�di v~m�du query-replace jsou
+
+\key{{\bf z�m�nu prov�st} a j�t na dal��}{SPC}
+\key{z�m�nu prov�st a z�stat na m�st�}{,}
+\key{{\bf sko�it} na dal�� bez proveden� z�m�ny}{DEL}
+\key{zam�nit v�echny zb�vaj�c� v�skyty}{!}
+\key{{\bf zp�t} na p�edchoz� v�skyt �et�zce}{^}
+\key{{\bf konec} nahrazov�n�}{RET}
+\key{rekurzivn� editace (ukon�� se \kbd{C-M-c})}{C-r}
+
+\section{Okna}
+
+Jestli�e jsou zobrazeny dva p��kazy, pak ten druh� plat� pro X okno.
+
+\key{zru�it v�echna ostatn� okna}{C-x 1}
+
+{\setbox0=\hbox{\kbd{0}}\advance\hsize by 0\wd0
+\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
+\threecol{rozd�lit okno na horn� a doln�}{C-x 2\ \ \ \ }{C-x 5 2}
+\threecol{zru�it toto okno}{C-x 0\ \ \ \ }{C-x 5 0}
+}}
+\key{rozd�lit okno na lev� a prav�}{C-x 3}
+
+\key{rolovat jin� okno}{C-M-v}
+
+{\setbox0=\hbox{\kbd{0}}\advance\hsize by 2\wd0
+\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
+\threecol{p�epnout kurzor do jin�ho okna}{C-x o}{C-x 5 o}
+
+\threecol{vybrat buffer v~jin�m okn�}{C-x 4 b}{C-x 5 b}
+\threecol{zobrazit buffer v~jin�m okn�}{C-x 4 C-o}{C-x 5 C-o}
+\threecol{otev��t soubor v~jin�m okn�}{C-x 4 f}{C-x 5 f}
+\threecol{otev��t soubor jen pro �ten� v~jin�m okn�}{C-x 4 r}{C-x 5 r}
+\threecol{spustit Dired v~jin�m okn�}{C-x 4 d}{C-x 5 d}
+\threecol{naj�t tag v~jin�m okn�}{C-x 4 .}{C-x 5 .}
+}}
+
+\key{zv�t�it okno}{C-x ^}
+\key{z��it okno}{C-x \{}
+\key{roz���it okno}{C-x \}}
+
+\section{Form�tov�n�}
+
+\key{odsadit aktu�ln� {\bf ��dek} (dle m�du)}{TAB}
+\key{odsadit {\bf oblast} (dle m�du)}{C-M-\\}
+\key{odsadit {\bf symbolick� v�raz} (dle m�du)}{C-M-q}
+\key{odsadit oblast napevno o~{\it argument\/} sloupc�}{C-x TAB}
+
+\key{vlo�it znak nov�ho ��dku za kurzor}{C-o}
+\key{posunout zbytek ��dku svisle dol�}{C-M-o}
+\key{smazat pr�zdn� ��dky okolo kurzoru}{C-x C-o}
+\key{spojit ��dek s~p�edchoz�m (s~arg.~s~n�sl.)}{M-^}
+\key{smazat pr�zdn� m�sto kolem kurzoru}{M-\\}
+\key{nechat p�esn� jednu mezeru kolem kurzoru}{M-SPC}
+
+\key{zalomit odstavec}{M-q}
+\key{nastavit sloupec pro zalamov�n�}{C-x f}
+\key{nastavit prefix, kter�m za��naj� ��dky}{C-x .}
+\key{nastavit font}{M-g}
+
+\section{Zm�na velikosti p�smen}
+
+\key{zm�nit p�smena slova na velk�}{M-u}
+\key{zm�nit p�smena slova na mal�}{M-l}
+\key{zm�nit po��te�n� p�smeno slova na velk�}{M-c}
+
+\key{zm�nit p�smena oblasti na velk�}{C-x C-u}
+\key{zm�nit p�smena oblasti na mal�}{C-x C-l}
+
+\section{Minibuffer}
+
+N�sleduj�c� kl�vesy jsou platn� pro minibuffer.
+
+\key{doplnit z~nab�dky}{TAB}
+\key{doplnit do nejbli���ho slova}{SPC}
+\key{doplnit a vykonat}{RET}
+\key{zobrazit mo�n� dopln�n�}{?}
+\key{p�edchoz� p��kaz z~minibufferu}{M-p}
+\key{nov�j�� nebo implicitn� p��kaz z~minibufferu}{M-n}
+\key{vyhledat regul�rn� v�raz v~historii vzad}{M-r}
+\key{vyhledat regul�rn� v�raz v~historii vp�ed}{M-s}
+\key{zru�it p��kaz}{C-g}
+
+Stiskn�te \kbd{C-x ESC ESC} pro editaci a zopakov�n� posledn�ho p��kazu
+z~minibufferu.  Stiskn�te \kbd{F10} pro aktivaci menu v~minibufferu.
+
+\newcolumn
+\title{GNU Emacs -- Referen�n� karta}
+
+\section{Buffery}
+
+\key{vybrat jin� buffer}{C-x b}
+\key{seznam v�ech buffer�}{C-x C-b}
+\key{zru�it buffer}{C-x k}
+
+\section{V�m�ny}
+
+\key{p�ehodit {\bf znaky}}{C-t}
+\key{p�ehodit {\bf slova}}{M-t}
+\key{p�ehodit {\bf ��dky}}{C-x C-t}
+\key{p�ehodit {\bf symbolick� v�razy}}{C-M-t}
+
+\section{Kontrola pravopisu}
+
+\key{kontrola pravopisu aktu�ln�ho slova}{M-\$}
+\metax{kontrola pravopisu v�ech slov v  oblasti}{M-x ispell-region}
+\metax{kontrola pravopisu cel�ho bufferu}{M-x ispell-buffer}
+
+\section{Tagy}
+
+\key{naj�t tag (definici)}{M-.}
+\key{naj�t dal�� v�skyt tagu}{C-u M-.}
+\metax{zadat soubor s nov�mi tagy}{M-x visit-tags-table}
+
+\metax{vyhledat reg.\ v�raz v~souborech s~tagy}{M-x tags-search}
+\metax{spustit nahrazov�n� pro ony soubory}{M-x tags-query-replace}
+\key{pokra�ovat v~prohled�v�n� nebo nahrazov�n�}{M-,}
+
+\section{P��kazov� interpret}
+
+\key{vykonat shellov� p��kaz}{M-!}
+\key{vykonat shellov� p��kaz na oblast}{M-|}
+\key{zfiltrovat oblast shellov�m p��kazem}{C-u M-|}
+\key{spustit shell v okn� \kbd{*shell*}}{M-x shell}
+
+\section{Obd�ln�ky}
+
+\key{zkop�rovat obd�ln�k do registru}{C-x r r}
+\key{zru�it obd�ln�k}{C-x r k}
+\key{vhodit obd�ln�k}{C-x r y}
+\key{vlo�it obd�ln�k mezer}{C-x r o}
+\key{nahradit obd�ln�k obd�ln�kem mezer}{C-x r c}
+\key{nahradit ��dky obd�ln�ku zadan�m �et�zcem}{C-x r t}
+
+\section{Zkratky}
+
+\key{p�idat glob�ln� zkratku}{C-x a g}
+\key{p�idat lok�ln� zkratku}{C-x a l}
+\key{p�idat glob�ln� expanzi pro zkratku }{C-x a i g}
+\key{p�idat lok�ln� expanzi pro zkratku}{C-x a i l}
+\key{expandovat zkratku}{C-x a e}
+
+\key{dynamick� expanze p�edch�zej�c�ho slova}{M-/}
+
+\section{Regul�rn� v�razy}
+
+\key{libovoln� znak krom� nov�ho ��dku}{. {\rm(te�ka)}}
+\key{��dn� nebo n�kolik opakov�n�}{*}
+\key{jedno nebo v�ce opakov�n�}{+}
+\key{��dn� nebo jedno opakov�n�}{?}
+\key{zru�it zvl�tn� v�znam znaku {\it c\/} ve v�razu}{\\{\it c}}
+\key{alternativa (\uv{nebo})}{\\|}
+\key{skupina}{\\( {\rm$\ldots$} \\)}
+\key{stejn� text jako {\it n\/}-t� skupina}{\\{\it n}}
+\key{hranice slova}{\\b}
+\key{nikoliv hranice slova}{\\B}
+
+\paralign to \hsize{#\tabskip=10pt plus 1 fil&#\tabskip=0pt&#\cr
+\threecol{{\bf element}}{{\bf za��tek}}{{\bf konec}}
+\threecol{��dek}{^}{\$}
+\threecol{slovo}{\\<}{\\>}
+\threecol{buffer}{\\`}{\\'}
+
+\threecol{{\bf t��da znak�}}{{\bf odpov�d�}}{{\bf neodpov�d�}}
+\threecol{explicitn� mno�ina}{[ {\rm$\ldots$} ]}{[^ {\rm$\ldots$} ]}
+\threecol{slovotvorn� znak}{\\w}{\\W}
+\threecol{znak se syntax� {\it c}}{\\s{\it c}}{\\S{\it c}}
+}
+
+\section{Mezin�rodn� znakov� sady}
+
+\metax{zadat hlavn� jazyk}{M-x set-language-environment}
+\metax{zobrazit v�echny vstupn� metody}{M-x list-input-methods}
+\key{zapnout nebo vypnout vstupn� metodu}{C-\\}
+\key{zadat k�dov�n� pro n�sleduj�c� p��kaz}{C-x RET c}
+\metax{zobrazit v�echna k�dov�n�}{M-x list-coding-systems}
+\metax{zm�nit preferovan� k�dov�n�}{M-x prefer-coding-system}
+
+\section{Info}
+
+\key{spustit Info}{C-h i}
+\key{naj�t zadanou funkci nebo prom�nnou v~Info}{C-h C-i}
+\beginindentedkeys
+
+Pohyb uvnit� uzl�:
+
+\key{rolov�n� vp�ed}{SPC}
+\key{rolov�n� zp�t}{DEL}
+\key{na za��tek uzlu}{. {\rm (te�ka)}}
+
+Pohyb mezi uzly:
+
+\key{{\bf dal��} uzel}{n}
+\key{{\bf p�edchoz�} uzel}{p}
+\key{{\bf nad�azen�} uzel}{u}
+\key{vybrat z~menu podle n�zvu}{m}
+\key{vybrat {\it n\/}-tou polo�ku menu (1--9)}{{\it n}}
+\key{nejbli��� p���t� k���ov� odkaz (n�vrat \kbd{l})}{f}
+\key{vr�tit se do naposledy prohl��en�ho uzlu}{l}
+\key{vr�tit se do adres��e uzl�}{d}
+\key{p�ej�t do kter�hokoliv uzlu podle jm�na}{g}
+
+Dal��:
+
+\key{spustit {\bf tutori�l} k~Info}{h}
+\key{{\bf ukon�it} Info}{q}
+\key{prohledat uzly na �et�zec}{M-s}
+
+\endindentedkeys
+
+\section{Registry}
+
+\key{ulo�it oblast do registru}{C-x r s}
+\key{vlo�it obsah registru do bufferu}{C-x r i}
+
+\key{ulo�it pozici kurzoru do registru}{C-x r SPC}
+\key{sko�it na pozici ulo�enou v~registru}{C-x r j}
+
+\section{Kl�vesov� makra}
+
+\key{{\bf zah�jit} definov�n� kl�vesov�ho makra}{C-x (}
+\key{{\bf zakon�it} definov�n� kl�vesov�ho makra}{C-x )}
+\key{{\bf vykonat} posledn� definovan� makro}{C-x e}
+\key{p�ipojit k~posledn�mu kl�vesov�mu makru}{C-u C-x (}
+\metax{pojmenovat posledn� makro}{M-x name-last-kbd-macro}
+\metax{vlo�it do bufferu lispovou definici}{M-x insert-kbd-macro}
+
+\section{P��kazy souvisej�c� s~Emacs Lispem}
+
+\key{vyhodnotit {\bf v�raz} p�ed kurzorem}{C-x C-e}
+\key{vyhodnotit {\bf funkci} pod kurzorem}{C-M-x}
+\metax{vyhodnotit {\bf oblast}}{M-x eval-region}
+\key{na��st a vyhodnotit v�raz v~minibufferu}{M-:}
+\metax{na��st soubor ze syst�mov�ho adres��e}{M-x load-library}
+
+\section{Jednoduch� p�izp�soben�}
+
+\metax{nastavit prom�nn� a faces}{M-x customize}
+
+% The intended audience here is the person who wants to make simple
+% customizations and knows Lisp syntax.
+
+Definice obecn� kl�vesov� zkratky v~Emacs Lispu (p��klad):
+
+\beginexample%
+(global-set-key "\\C-cg" 'goto-line)
+(global-set-key "\\M-\#" 'query-replace-regexp)
+\endexample
+
+\section{Z�pis p��kaz�}
+
+\beginexample%
+(defun \<command-name> (\<args>)
+  "\<documentation>" (interactive "\<template>")
+  \<body>)
+\endexample
+
+P��klad:
+
+\beginexample%
+(defun this-line-to-top-of-window (line)
+  "Reposition line point is on to top of window.
+With ARG, put point on line ARG."
+  (interactive "P")
+  (recenter (if (null line)
+                0
+              (prefix-numeric-value line))))
+\endexample
+
+Specifikace \kbd{interactive} ��k�, jak interaktivn� na��st ar\-gu\-men\-ty.
+V�ce se dozv�te po proveden� \kbd{C-h f interactive}.
+
+\copyrightnotice
+
+\bye
+
+% Local variables:
+% compile-command: "tex refcard"
+% End: