add scripts for creating precompiled Windows distributions

1 files changed, 241 insertions, 0 deletions

diff --git a/admin/nt/README-ftp-server b/admin/nt/README-ftp-server
new file mode 100644
index 0000000000..29f8e36d34
--- /dev/null
+++ b/admin/nt/README-ftp-server
@@ -0,0 +1,241 @@
+		      Precompiled Distributions of
+	      Emacs for Windows NT and Windows 95/98/2000
+
+			      Version 20.7
+
+			     June 13, 2000
+		
+  This directory contains source and precompiled distributions for GNU
+  Emacs on Windows NT and Windows 95/98/2000.  This port is a part of
+  the standard GNU Emacs distribution from the Free Software Foundation;
+  the precompiled distributions are provided here for convenience since,
+  unlike Unix, the majority of Windows users do not have access to a
+  compiler (and, besides, do you really want to compile Emacs when you
+  don't have to?).
+
+  If you have access to the World Wide Web, I would recommend pointing
+  your favorite web browser to the following document (if you haven't
+  already):
+
+	http://www.gnu.org/software/emacs/windows/ntemacs.html
+
+  The above web document is a far more complete version of this README
+  file.  If you don't have access to the Web, however, then read on.
+
+
+* IMPORTANT LEGAL REMINDER
+
+  If you want to redistribute any of the precompiled distributions of
+  Emacs, be careful to check the implications of the GPL.  For instance,
+  if you put the emacs-20.7-bin-i386.tar.gz file from this directory on
+  an Internet site, you must arrange to distribute the source files of
+  the SAME version (i.e. emacs-20.7-src.tar.gz).
+
+  Making a link to our copy of the source is NOT sufficient, since we
+  might upgrade to a new version while you are still distributing the
+  old binaries.
+
+
+* Distributions in .tar.gz format
+
+  Emacs is distributed primarily as a set of large gzipped tar files
+  (*.tar.gz).  Because Emacs is quite large and therefore difficult to
+  download over unreliable connections, it is provided in several
+  combinations, ranging from the complete source plus executables, to
+  just the minimal amount needed to run without any source, plus a
+  couple of optional packages.  Here are the combinations (i386 in the
+  name indicates a tarball contains executables compiled for
+  Intel-compatible x86 systems):
+
+  + Primary precompiled distribution, including lisp source:
+
+      emacs-20.7-fullbin-i386.tar.gz
+
+  + Minimal precompiled distribution, which excludes lisp source:
+
+      emacs-20.7-bin-i386.tar.gz
+
+    You can download emacs-20.7-lisp.tar.gz to get the lisp source, if
+    you later decide you want it - it is useful for understanding how
+    packages work, and how they can best be setup or customized.
+
+
+  NB. If you just want to run Emacs, get one of the distributions above.
+
+
+  + Bare executables, only useful if you want to get the complete source
+    release below, but can't compile Emacs yourself:
+
+      emacs-20.7-barebin-i386.tar.gz  (requires emacs-20.7-src.tar.gz)
+
+  + Undumped executable, only needed for rebuilding Emacs after changing
+    certain core lisp files:
+
+      emacs-20.7-undumped-i386.tar.gz
+
+  + Optional package providing the Library of Emacs Input Methods for
+    typing non-ascii characters, notably Chinese, Japanese and Korean,
+    but also including European and other character sets:
+
+      emacs-20.7-leim.tar.gz
+
+  + The complete official source for Emacs:
+
+      emacs-20.7-src.tar.gz
+
+  + The complete official source for LEIM:
+
+      leim-20.7-src.tar.gz
+
+
+* Distributions in multi-file .zip format
+
+  A second distribution in the form of multiple small .zip files is also
+  provided, for the benefit of people who have unreliable internet
+  connections, or who need to copy the distribution onto floppy disks:
+
+      em207-b*.zip
+
+  This is equivalent to getting emacs-20.7-bin-i386.tar.gz above.
+  The lisp source is available as em207-l*.zip.
+
+
+* Distributions for non-x86 platforms
+
+  I try to make this port available for all platforms supported by
+  Windows (it should build on all supported Windows NT/9x platforms).
+  However, I do not always have access to non-x86 platforms, and so I
+  cannot guarantee to provide precompiled distributions for the other
+  platforms myself.  If you find there are no binaries for your
+  platform, and you have access to a Microsoft compiler, then you can
+  download the source and compile Emacs yourself (and, if you do, please
+  consider contributing your executables; send me mail and we can make
+  arrangements for making them available on this ftp server.)
+
+
+* Unpacking distributions
+
+  Programs for handling the distribution file formats can be found in
+  the utilities directory: 
+
+    ftp://ftp.gnu.org/gnu/windows/emacs/utilities
+
+  For gzipped tar files, you will need either gunzip.exe and tar.exe
+  together, or djtarnt.exe.  djtarnt.exe can also unpack .zip files.  I
+  strongly urge you to use these utilities since they were the ones used
+  to create the distributions; the most common problem people have in
+  trying to get Emacs to run is due to some other utility program
+  corrupting the distribution while unpacking.
+
+  Open a command prompt (MSDOS) window.  Decide on a directory in which
+  to place Emacs.  Move the distribution to that directory, and then
+  unpack it as follows.
+
+  If you have the gzipped tar version, use gunzip to uncompress the tar
+  file on the fly, and pipe the output through tar with the "xvf" flags
+  to extract the files from the tar file:
+
+    % gunzip -c some.tar.gz | tar xvf -
+
+  You may see messages from tar about not being able to change the
+  modification time on directories, and from gunzip complaining about a
+  broken pipe.  These messages are harmless and you can ignore them.  On
+  Windows NT, unpacking tarballs this way leaves them in compressed
+  form, taking up less space on disk.  Unfortunately, on Windows 95 and
+  98, a large temporary file is created, so it is better to use the
+  djtarnt.exe program, which performs the equivalent operation in one
+  step:
+
+    % djtarnt -x some.tar.gz
+
+  You may be prompted to rename or overwrite directories when using
+  djtarnt: simply type return to continue (this is harmless).
+
+  If you have the multi-file .zip distribution, use djtarnt to unpack
+  all of the .zip files:
+
+    % djtarnt -x *.zip
+
+  Once you have unpacked a precompiled distribution of Emacs, it should
+  have the following subdirectories:
+
+	bin	etc	info	lisp	lock	site-lisp
+
+  If your utility failed to create the lock directory, then you can
+  simply create it by hand (it is initially empty).
+
+
+* Unpacking with other tools
+
+  If you do use other utility programs to unpack the distribution, check
+  the following to be sure the distribution was not corrupted:
+
+  + Be sure to disable the CR/LF translation or the executables will be
+    unusable.  Older versions of WinZipNT would enable this translation
+    by default.  If you are using WinZipNT, disable it.  (I don't have
+    WinZipNT myself, and I do not know the specific commands necessary
+    to disable it.)
+
+  + Check that filenames were not truncated to 8.3.  For example, there
+    should be a file lisp/abbrevlist.el; if this has been truncated to
+    abbrevli.el, your distribution has been corrupted while unpacking
+    and Emacs will not start.
+
+  + I've been told that some utilities (WinZip again?) don't create the
+    lock subdirectory.  The lock subdirectory needs to be created.
+
+  + I've also had reports that the "gnu-win32" port of tar corrupts the
+    executables.  Use the version of tar or djtarnt in the utilities
+    directory instead.
+
+  If you believe you have unpacked the distributions correctly and are
+  still encountering problems, see the section on Further Information
+  below.
+
+
+* Compiling from source
+
+  If you would like to compile Emacs from source, download the source
+  distribution, unpack it in the same manner as a precompiled
+  distribution, and look in the file nt/INSTALL for detailed directions.
+  Note, though, that you must have a Microsoft compiler to compile the
+  source.  (Support for compiling with gcc 2.95 or later will be
+  available in a future release.)
+
+
+* Further information
+
+  There is a web page that serves as a FAQ at:
+
+	http://www.gnu.org/software/emacs/windows/ntemacs.html
+
+  There is also a mailing list for discussing issues related to this
+  port of Emacs.  For information about the list, send a message to
+  [email protected] with the word "info" in the
+  *body* of the message.  To subscribe to the list, send a message to
+  the same address with the word "subscribe" in the body of the message;
+  similarly, to unsubscribe from the list, send a message with the word
+  "unsubscribe" in the message body.
+
+  Another valuable source of information and help which should not be
+  overlooked is the various Usenet news groups dedicated to Emacs.
+  These are particuarly good for help with general issues which aren't
+  specific to the Windows port of Emacs.  The main news groups to use
+  for seeking help are:
+
+	gnu.emacs.help
+	comp.emacs
+
+  There are also fairly regular postings and announcements of new or
+  updated Emacs packages on this group:
+
+	gnu.emacs.sources
+
+  You are also always welcome to send me mail directly.  If you don't
+  hear from me immediately, however, don't worry; it sometimes takes me
+  a few days (or longer) to get to all of my mail regarding Emacs.
+
+  Enjoy!
+
+  Andrew Innes
+  ([email protected])