Remove moc

3 files changed, 0 insertions, 891 deletions

diff --git a/.moc/config b/.moc/config
deleted file mode 100644
index 497eafe..0000000
--- a/.moc/config
+++ /dev/null
@@ -1,704 +0,0 @@
-# This is a configuration file for the MOC player.  It should be named
-# 'config' and placed in the ~/.moc directory.  As this file can specify
-# commands which invoke other applications, MOC will refuse to start if it
-# is not owned by either root or the current user, or if it is writable by
-# anyone other than its owner.  All options are given with their default
-# values, and therefore commented.
-
-# Comments begin with '#'.
-# You can use quotes and escape ('\') in parameters.
-#
-# You can have variable values substituted by enclosing the variable name
-# as "${...}".  (This only applies to the portion of the option following
-# the '='.)  Variables are substituted first from the environment then,
-# if not found, from the configuration options.  (Note that the value of
-# a configuration option substituted is that which it has at the time the
-# substitution variable is encountered.)  If there is a naming conflict
-# between an environment and configuration variable, you may be able to
-# resolve it by using lowercase as the environment variable matches are
-# case-sensitive whereas the configuration variables are not.
-#
-# You can also use the form "${...:-...}" where the value in the second
-# position will be substituted if the variable name given in the first
-# position is unset or null.
-#
-# So, for example:
-#
-#     MusicDir = /music/${USER:-public}
-#     Fastdir1 = ${MusicDir}/mp3/rock
-#     Fastdir2 = ${MusicDir}/mp3/electronic
-#     Fastdir3 = ${MusicDir}/mp3/rap
-#     Fastdir4 = ${MusicDir}/mp3/etc
-#
-# Variable names are limited to those accepted by the BASH shell; that
-# is, those comprising the upper- and lowercase ASCII characters, digits
-# and the underscore.
-#
-# If you need to use the "${" sequence for any other purpose, write "$${"
-# and it will be replaced by "${" and not treated as a substitution.
-#
-# Some options take lists of strings as their values.  The strings are
-# separated by colons.  Additional strings can be appended to the list
-# using "+=" in place of a plain "=" to assign the value.  For an example,
-# see the XTerms option.
-#
-# You can override any configuration option when you run MOC using the
-# '-O' command line option:
-#
-#     mocp -O AutoNext=no -O messagelingertime=1 -O XTerms+=xxt:xwt
-#
-# This command line option can be repeated as many times as needed and
-# the configuration option name is not case sensitive.  (Note that MOC
-# does not perform variable substitution on the value of such overridden
-# configuration options.)  Most option values are set before the
-# configuration file is processed (which allows the new values to be
-# picked up by substitutions), however list-valued options are overridden
-# afterwards (which gives the choice of whether the configured values are
-# replaced or added to).
-
-# Remember that the client and server are separate processes and the
-# server will retain the configuration values formed from the environment
-# within which it was originally started.
-
-# Show file titles (title, author, album) instead of file names?
-#ReadTags = yes
-
-# In which directory do you store your music files?  If you specify it
-# you will be able to jump straight to this directory with the '-m'
-# parameter or the 'm' command.  This can also point to a playlist.
-#
-# Example:    MusicDir = "/home/joe/music"
-#
-MusicDir = "/hdd/Music"
-
-# Start in the music directory by default?  If set to 'no', start
-# in the current directory by default.  A single directory on
-# the command line takes precedence.
-StartInMusicDir = yes
-
-# The number of lines which are retained in an in-memory circular logging
-# buffer.  A value of zero indicates that lines will be written directly
-# to the log file, otherwise the latest CircularLogSize lines are retained
-# in memory and not written to the log file until the MOC client or server
-# are shutdown.  If the client or server terminates abnormally then the
-# log lines are lost.
-#
-# This option is intended to help identify problems which occur infrequently
-# and for which the amount of disk space consumed by logging would otherwise
-# be a limiting factor.  Obviously the memory footprint will increase in
-# proportion to the value of this option.
-#CircularLogSize = 0
-
-# How to sort?  FileName is the option's only value for now.
-#Sort = FileName
-
-# Show errors in the streams (for example, broken frames in MP3 files)?
-#ShowStreamErrors = no
-
-# Ignore CRC errors in MP3 files?  Most players do that, so the default
-# value is 'yes'.
-#MP3IgnoreCRCErrors = yes
-
-# Set playback toggles.
-#Repeat = no
-#Shuffle = no
-#AutoNext = yes
-
-# Default FormatString:
-#
-#   %n - Track number
-#   %a - Artist
-#   %A - Album
-#   %t - Title
-#   %(X:TRUE:FALSE) - Ternary expression: if X exists, do TRUE,
-#                     otherwise FALSE.  The escape character must
-#                     be doubled (i.e., '\\').  (See zshmisc
-#                     documentation for more information.)
-#
-#FormatString = "%(n:%n :)%(a:%a - :)%(t:%t:)%(A: \(%A\):)"
-
-# Input and output buffer sizes (in kilobytes).
-#InputBuffer = 512                  # Minimum value is 32KB
-#OutputBuffer = 512                 # Minimum value is 128KB
-
-# How much to fill the input buffer before playing (in kilobytes)?
-# This can't be greater than the value of InputBuffer.  While this has
-# a positive effect for network streams, it also causes the broadcast
-# audio to be delayed.
-#Prebuffering = 64
-
-# Use this HTTP proxy server for internet streams.  If not set, the
-# environment variables http_proxy and ALL_PROXY will be used if present.
-#
-# Format: HTTPProxy = PROXY_NAME:PORT
-#
-#HTTPProxy =
-
-# Sound driver - OSS, ALSA, JACK, SNDIO (on OpenBSD) or null (only for
-# debugging).  You can enter more than one driver as a colon-separated
-# list.  The first working driver will be used.
-#SoundDriver = JACK:ALSA:OSS
-
-# Jack output settings.
-#JackClientName = "moc"
-#JackStartServer = no
-#JackOutLeft = "system:playback_1"
-#JackOutRight = "system:playback_2"
-
-# OSS output settings.
-#OSSDevice = /dev/dsp
-#OSSMixerDevice = /dev/mixer
-#OSSMixerChannel1 = pcm             # 'pcm', 'master' or 'speaker'
-#OSSMixerChannel2 = master          # 'pcm', 'master' or 'speaker'
-
-# ALSA output settings.  If you need to dump the audio produced by MOC
-# to a file for diagnostic purposes, the following setting of 'ALSADevice'
-# should do that:
-#
-#    ALSADevice=tee:hw,'/tmp/out.wav',wav
-#
-#ALSADevice = default
-#ALSAMixer1 = PCM
-#ALSAMixer2 = Master
-
-# Under some circumstances on 32-bit systems, audio played continously
-# for long periods of time may begin to stutter.  Setting this option to
-# 'yes' will force MOC to avoid ALSA's dmix resampling and prevent this
-# stutter.  But it also has other implications:
-#
-# - You may experience unacceptably high CPU load.
-# - ALSA's resampler plug-ins will not be used.
-# - The resampling may be of lower quality than ALSA would provide.
-# - You may need to try different "ResampleMethod" option settings.
-# - The "ForceSampleRate" option may be ineffective.
-# - If libsamplerate is not configured, many audios may be unplayable.
-#
-#ALSAStutterDefeat = no
-
-# Save software mixer state?
-# If enabled, a file 'softmixer' will be created in '~/.moc/' storing the
-# mixersetting set when the server is shut down.
-# Note that there is a "hidden" 'Amplification' setting in that file.
-# Amplification (0-200) is used to scale the mixer setting (0-100).  This
-# results in a higher signal amplitude but may also produce clipping.
-#Softmixer_SaveState = yes
-
-# Save equalizer state?
-# If enabled, a file 'equalizer' will be created in '~/.moc/' storing the
-# equalizer settings when the server is shut down.
-# Note that there is a "hidden" 'Mixin' setting in that file.
-# Mixin (0.0-1.0) is used to determine how much of the original signal is
-# used after equalizing.  0 means to only use the equalized sound, while 1
-# effectively disabled the mixer.  The default is 0.25.
-#Equalizer_SaveState = yes
-
-# Show files with dot at the beginning?
-#ShowHiddenFiles = no
-
-# Hide file name extensions?
-#HideFileExtension = no
-
-# Show file format in menu?
-#ShowFormat = yes
-
-# Show file time in menu?  Possible values: 'yes', 'no' and 'IfAvailable'
-# (meaning show the time only when it is already known, which often works
-# faster).
-#ShowTime = IfAvailable
-
-# Show time played as a percentage in the time progress bar.
-#ShowTimePercent = no
-
-# Values of the TERM environment variable which are deemed to be managed by
-# screen(1).  If you are setting a specific terminal using screen(1)'s
-# '-T <term>' option, then you will need to add 'screen.<term>' to this list.
-# Note that this is only a partial test; the value of the WINDOW environment
-# variable must also be a number (which screen(1) sets).
-#ScreenTerms = screen:screen-w:vt100
-
-# Values of the TERM environment variable which are deemed to be xterms.  If
-# you are using MOC within screen(1) under an xterm, then add screen(1)'s
-# TERM setting here as well to cause MOC to update the xterm's title.
-#XTerms = xterm
-#XTerms += xterm-colour:xterm-color
-#XTerms += xterm-256colour:xterm-256color
-#XTerms += rxvt:rxvt-unicode
-#XTerms += rxvt-unicode-256colour:rxvt-unicode-256color
-#XTerms += eterm
-
-# Theme file to use.  This can be absolute path or relative to
-# /usr/share/moc/themes/ (depends on installation prefix) or
-# ~/.moc/themes/ .
-#
-# Example:    Theme = laras_theme
-#
-Theme = orange
-
-# The theme used when running on an xterm.
-#
-# Example:    XTermTheme = transparent-background
-#
-#XTermTheme =
-
-# Should MOC try to autoload the default lyrics file for an audio?  (The
-# default lyrics file is a text file with the same file name as the audio
-# file name with any trailing "extension" removed.)
-#AutoLoadLyrics = yes
-
-# MOC directory (where pid file, socket and state files are stored).
-# You can use ~ at the beginning.
-#MOCDir = ~/.moc
-
-# Use mmap() to read files.  mmap() is much slower on NFS.
-#UseMMap = no
-
-# Use MIME to identify audio files.  This can make for slower loading
-# of playlists but is more accurate than using "extensions".
-#UseMimeMagic = no
-
-# Assume this encoding for ID3 version 1/1.1 tags (MP3 files).  Unlike
-# ID3v2, UTF-8 is not used here and MOC can't guess how tags are encoded.
-# Another solution is using librcc (see the next option).  This option is
-# ignored if UseRCC is set to 'yes'.
-#ID3v1TagsEncoding = WINDOWS-1250
-
-# Use librcc to fix ID3 version 1/1.1 tags encoding.
-#UseRCC = yes
-
-# Use librcc to filenames and directory names encoding.
-#UseRCCForFilesystem = yes
-
-# When this option is set the player assumes that if the encoding of
-# ID3v2 is set to ISO-8859-1 then the ID3v1TagsEncoding is actually
-# that and applies appropriate conversion.
-#EnforceTagsEncoding = no
-
-# Enable the conversion of filenames from the local encoding to UTF-8.
-#FileNamesIconv = no
-
-# Enable the conversion of the xterm title from UTF-8 to the local encoding.
-#NonUTFXterm = no
-
-# Should MOC precache files to assist gapless playback?
-#Precache = yes
-
-# Remember the playlist after exit?
-#SavePlaylist = yes
-
-# When using more than one client (interface) at a time, do they share
-# the playlist?
-#SyncPlaylist = yes
-
-# Choose a keymap file (relative to '~/.moc/' or using an absolute path).
-# An annotated example keymap file is included ('keymap.example').
-#
-# Example:    Keymap = my_keymap
-#
-Keymap = keymap.conf
-
-# Use ASCII rather than graphic characters for drawing lines.  This
-# helps on some terminals.
-#ASCIILines = no
-
-# FastDirs, these allow you to jump directly to a directory, the key
-# bindings are in the keymap file.
-#
-# Examples:   Fastdir1 = /mp3/rock
-#             Fastdir2 = /mp3/electronic
-#             Fastdir3 = /mp3/rap
-#             Fastdir4 = /mp3/etc
-#
-#Fastdir1 =
-#Fastdir2 =
-#Fastdir3 =
-#Fastdir4 =
-#Fastdir5 =
-#Fastdir6 =
-#Fastdir7 =
-#Fastdir8 =
-#Fastdir9 =
-#Fastdir10 =
-
-# How fast to seek (in number of seconds per keystroke).  The first
-# option is for normal seek and the second for silent seek.
-#SeekTime = 1
-#SilentSeekTime = 5
-
-# PreferredDecoders allows you to specify which decoder should be used
-# for any given audio format.  It is a colon-separated list in which
-# each entry is of the general form 'code(decoders)', where 'code'
-# identifies the audio format and 'decoders' is a comma-separated list
-# of decoders in order of preference.
-#
-# The audio format identifier may be either a filename extension or a
-# MIME media type.  If the latter, the format is 'type/subtype' (e.g.,
-# 'audio/flac').  Because different systems may give different MIME
-# media types, any 'x-' prefix of the subtype is ignored both here and
-# in the actual file MIME type (so all combinations of 'audio/flac' and
-# 'audio/x-flac' match each other).
-#
-# For Internet streams the matching is done on MIME media type and on
-# actual content.  For files the matches are made on MIME media type
-# (if the 'UseMimeMagic' option is set) and on filename extension.  The
-# MIME media type of a file is not determined until the first entry for
-# MIME is encountered in the list.
-#
-# The matching is done in the order of appearance in the list with any
-# entries added from the command line being matched before those listed
-# here.  Therefore, if you place all filename extension entries before
-# all MIME entries you will speed up MOC's processing of directories
-# (which could be significant for remote file systems).
-#
-# The decoder list may be empty, in which case no decoders will be used
-# for files (and files with that audio format ignored) while Internet
-# streams will be assessed on the actual content.  Any decoder position
-# may contain an asterisk, in which case any decoder not otherwise listed
-# which can handle the audio format will be used.  It is not an error to
-# list the same decoder twice, but neither does it make sense to do so.
-#
-# If you have a mix of audio and non-audio files in your directories, you
-# may wish to include entries at top of the list which ignore non-audio
-# files by extension.
-#
-# In summary, the PreferredDecoders option provides fine control over the
-# type of matching which is performed (filename extension, MIME media
-# type and streamed media content) and which decoder(s) (if any) are used
-# based on the option's list entries and their ordering.
-#
-# Examples:   aac(aac,ffmpeg)             first try FAAD2 for AACs then FFmpeg
-#             mp3()                       ignore MP3 files
-#             wav(*,sndfile)              use sndfile for WAV as a last resort
-#             ogg(vorbis,*):flac(flac,*)  try Xiph decoders first
-#             ogg():audio/ogg()           ignore OGG files, and
-#                                         force Internet selection by content
-#             gz():html()                 ignore some non-audio files
-#
-# Any unspecified audio formats default to trying all decoders.
-# Any unknown (or misspelt) drivers are ignored.
-# All names are case insensitive.
-# The default setting reflects the historical situation modified by
-# the experience of users.
-#
-#PreferredDecoders  = aac(aac,ffmpeg):m4a(ffmpeg)
-#PreferredDecoders += mpc(musepack,*,ffmpeg):mpc8(musepack,*,ffmpeg)
-#PreferredDecoders += sid(sidplay2):mus(sidplay2)
-#PreferredDecoders += wav(sndfile,*,ffmpeg)
-#PreferredDecoders += wv(wavpack,*,ffmpeg)
-#PreferredDecoders += audio/aac(aac):audio/aacp(aac):audio/m4a(ffmpeg)
-#PreferredDecoders += audio/wav(sndfile,*)
-
-# The following PreferredDecoders attempt to handle the ambiguity surrounding
-# container types such as OGG for files.  The first two entries will force
-# a local file to the correct decoder (assuming the .ogg file contains Vorbis
-# audio), while the MIME media types will cause Internet audio streams to
-# be assessed on content (which may be either Vorbis or Speex).
-#
-#PreferredDecoders += ogg(vorbis,*,ffmpeg):oga(vorbis,*,ffmpeg):ogv(ffmpeg)
-#PreferredDecoders += application/ogg(vorbis):audio/ogg(vorbis)
-#PreferredDecoders += flac(flac,*,ffmpeg)
-#PreferredDecoders += opus(ffmpeg)
-#PreferredDecoders += spx(speex)
-
-# Which resampling method to use.  There are a few methods of resampling
-# sound supported by libresamplerate.  The default is 'Linear') which is
-# also the fastest.  A better description can be found at:
-#
-#    http://www.mega-nerd.com/libsamplerate/api_misc.html#Converters
-#
-# but briefly, the following methods are based on bandlimited interpolation
-# and are higher quality, but also slower:
-#
-#    SincBestQuality   - really slow (I know you probably have an xx GHz
-#                        processor, but it's still not enough to not see
-#                        this in the top output :)  The worst case
-#                        Signal-to-Noise Ratio is 97dB.
-#    SincMediumQuality - much faster.
-#    SincFastest       - the fastest bandlimited interpolation.
-#
-# And these are lower quality, but much faster methods:
-#
-#    ZeroOrderHold - really poor quality, but it's really fast.
-#    Linear - a bit better and a bit slower.
-#
-#ResampleMethod = Linear
-
-# Always use this sample rate (in Hz) when opening the audio device (and
-# resample the sound if necessary).  When set to 0 the device is opened
-# with the file's rate.
-#ForceSampleRate = 0
-
-# By default, even if the sound card reports that it can output 24bit samples
-# MOC converts 24bit PCM to 16bit.  Setting this option to 'yes' allows MOC
-# to use 24bit output.  (The MP3 decoder, for example, uses this format.)
-# This is disabled by default because there were reports that it prevents
-# MP3 files from playing on some soundcards.
-#Allow24bitOutput = no
-
-# Use realtime priority for output buffer thread.  This will prevent gaps
-# while playing even with heavy load.  The user who runs MOC must have
-# permissions to set such a priority.  This could be dangerous, because it
-# is possible that a bug in MOC will freeze your computer.
-#UseRealtimePriority = no
-
-# The number of audio files for which MOC will cache tags.  When this limit
-# is reached, file tags are discarded on a least recently used basis (with
-# one second resolution).  You can disable the cache by giving it a size of
-# zero.  Note that if you decrease the cache size below the number of items
-# currently in the cache, the number will not decrease immediately (if at
-# all).
-#TagsCacheSize = 256
-
-# Number items in the playlist.
-#PlaylistNumbering = yes
-
-# Main window layouts can be configured.  You can change the position and
-# size of the menus (directory and playlist).  You have three layouts and
-# can switch between then using the 'l' key (standard mapping).  By default,
-# only two layouts are configured.
-#
-# The format is as follows:
-#
-#     - Each layout is described as a list of menu entries.
-#     - Each menu entry is of the form:
-#
-#           menu(position_x, position_y, width, height)
-#
-#       where 'menu' is either 'directory' or 'playlist'.
-#     - The parameters define position and size of the menu.  They can
-#       be absolute numbers (like 10) or a percentage of the screen size
-#       (like 45%).
-#     - 'width' and 'height' can have also value of 'FILL' which means
-#        fill the screen from the menu's position to the border.
-#     - Menus may overlap.
-#
-# You must describe at least one menu (default is to fill the whole window).
-# There must be at least one layout (Layout1) defined; others can be empty.
-#
-# Example:    Layout1 = playlist(50%,50%,50%,50%)
-#             Layout2 = ""
-#             Layout3 = ""
-#
-#             Just one layout, the directory will occupy the whole
-#             screen, the playlist will have 1/4 of the screen size
-#             and be positioned at lower right corner.  (Note that
-#             because the playlist will be hidden by the directory
-#             you will have to use the TAB key to make the playlist
-#             visible.)
-#
-# Example:    Layout1 = playlist(0,0,100%,10):directory(0,10,100%,FILL)
-#
-#             The screen is split into two parts: playlist at the top
-#             and the directory menu at the bottom.  Playlist will
-#             occupy 10 lines and the directory menu the rest.
-#
-#Layout1 = directory(0,0,50%,100%):playlist(50%,0,FILL,100%)
-#Layout2 = directory(0,0,100%,100%):playlist(0,0,100%,100%)
-#Layout3 = ""
-
-# When the song changes, should the menu be scrolled so that the currently
-# played file is visible?
-#FollowPlayedFile = yes
-
-# What to do if the interface was started and the server is already playing
-# something from the playlist?  If CanStartInPlaylist is set to 'yes', the
-# interface will switch to the playlist.  When set to 'no' it will start
-# from the last directory.
-#CanStartInPlaylist = yes
-
-# Executing external commands (1 - 10) invoked with key commands (F1 - F10
-# by default).
-#
-# Some arguments are substituted before executing:
-#
-#     %f - file path
-#     %i - title made from tags
-#     %S - start block mark (in seconds)
-#     %E - end block mark (in seconds)
-#
-# Data from tags can also be substituted:
-#
-#     %t - title
-#     %a - album
-#     %r - artist
-#     %n - track
-#     %m - time of the file (in seconds)
-#
-# The parameters above apply to the currently selected file.  If you change
-# them to capital letters, they are taken from the file currently playing.
-#
-# Programs are run using execv(), not a shell, so you can't do things like
-# redirecting the output to a file.  The command string is split using blank
-# characters as separators; the first element is the command to be executed
-# and the rest are its parameters, so if you use "echo Playing: %I" we run
-# program 'echo' (from $PATH) with 2 parameters: the string 'Playing:' and
-# the title of the file currently playing.  Even if the title contains
-# spaces, it's still one parameter and it's safe if it contains `rm -rf /`.
-#
-# Examples:   ExecCommand1 = "cp %f /mnt/usb_drive"
-#             ExecCommand2 = "/home/joe/now_playing %I"
-#
-#ExecCommand1 =
-#ExecCommand2 =
-#ExecCommand3 =
-#ExecCommand4 =
-#ExecCommand5 =
-#ExecCommand6 =
-#ExecCommand7 =
-#ExecCommand8 =
-#ExecCommand9 =
-#ExecCommand10 =
-
-# Display the cursor in the line with the selected file.  Some braille
-# readers (the Handy Tech modular series ZMU 737, for example) use the
-# cursor to focus and can make use of it to present the file line even
-# when other fields are changing.
-#UseCursorSelection = no
-
-# Set the terminal title when running under xterm.
-#SetXtermTitle = yes
-
-# Set the terminal title when running under screen(1).  If MOC can detect
-# that it is running under screen(1), then it will set an appropriate
-# title (see description of ScreenTerms above).  However, if multiple
-# levels of screen management are involved, detection might fail and this
-# could cause a screen upset.  In that situation you can use this option
-# to force screen titles off.
-#SetScreenTitle = yes
-
-# Display full paths instead of just file names in the playlist.
-#PlaylistFullPaths = yes
-
-# The following setting describes how block markers are displayed in
-# the play time progress bar.  Its value is a string of exactly three
-# characters.  The first character is displayed in a position which
-# corresponds to the time marked as the start of a block and the last
-# character to the time marked as the end of the block.  The middle
-# character is displayed instead if both the start and the end of the block
-# would fall in the same position (within the resolution of the interface).
-# You can turn off the displaying of these block marker positions by using
-# three space characters.
-#BlockDecorators = "`\"'"
-
-# How long (in seconds) to leave a message displayed on the screen.
-# Setting this to a high value allows you to scroll through the messages
-# using the 'hide_message' key.  Setting it to zero means you'll have to
-# be quick to see any message at all.  Any new messages will be queued up
-# and displayed after the current message's linger time expires.
-#MessageLingerTime = 3
-
-# Does MOC display a prefix on delayed messages indicating
-# the number of queued messages still to be displayed?
-#PrefixQueuedMessages = yes
-
-# String to append to the queued message count if any
-# error messages are still waiting to be displayed.
-#ErrorMessagesQueued = "!"
-
-# Self-describing ModPlug options (with 'yes' or 'no' values).
-#ModPlug_Oversampling = yes
-#ModPlug_NoiseReduction = yes
-#ModPlug_Reverb = no
-#ModPlug_MegaBass = no
-#ModPlug_Surround = no
-
-# ModPlug resampling mode.
-# Valid values are:
-#
-#     FIR -      8 tap fir filter (extremely high quality)
-#     SPLINE -   Cubic spline interpolation (high quality)
-#     LINEAR -   Linear interpolation (fast, good quality)
-#     NEAREST -  No interpolation (very fast, extremely bad sound quality)
-#
-#ModPlug_ResamplingMode = FIR
-
-# Other self-describing ModPlug audio characteristic options.
-# (Note that the 32 bit sample size seems to be buggy.)
-#ModPlug_Channels = 2               # 1 or 2 channels
-#ModPlug_Bits = 16                  # 8, 16 or 32 bits
-#ModPlug_Frequency = 44100          # 11025, 22050, 44100 or 48000 Hz
-#ModPlug_ReverbDepth = 0            # 0 (quiet) to 100 (loud)
-#ModPlug_ReverbDelay = 0            # Delay in ms (usually 40-200ms)
-#ModPlug_BassAmount = 0             # 0 (quiet) to 100 (loud).
-#ModPlug_BassRange = 10             # Cutoff in Hz (10-100).
-#ModPlug_SurroundDepth = 0          # Surround level 0(quiet)-100(heavy).
-#ModPlug_SurroundDelay = 0          # Surround delay in ms, usually 5-40ms.
-#ModPlug_LoopCount = 0              # 0 (never), n (times) or -1 (forever)
-
-# Self-describing TiMidity audio characteristic options.
-#TiMidity_Rate = 44100              # Between 8000 and 48000
-#TiMidity_Bits = 16                 # 8 or 16
-#TiMidity_Channels = 2              # 1 or 2
-#TiMidity_Volume = 100              # 0 to 800
-
-# You can setup a TiMidity-Config-File here.
-# Leave it unset to use library defaults (/etc/timidity.cfg mostly).
-# Setting it to 'yes' also uses the library defaults.
-# Set it to 'no' if you don't have any configuration file.
-# Otherwise set it to the name of a specific file.
-#TiMidity_Config =
-
-# Self-describing SidPlay2 audio characteristic options.
-#SidPlay2_DefaultSongLength = 180   # If not in database (in seconds)
-#SidPlay2_MinimumSongLength = 0     # Play at least n (in seconds)
-#SidPlay2_Frequency = 44100         # 4000 to 48000
-#SidPlay2_Bits = 16                 # 8 or 16
-#SidPlay2_Optimisation = 0          # 0 (worst quality) to 2 (best quality)
-
-# Set path to a HVSC-compatible database (if not set, database is disabled).
-#SidPlay2_Database =
-
-# SidPlay2 playback Mode:
-#
-#     "M": Mono (best for many SIDs)
-#     "S": Stereo
-#     "L"/"R": Left / Right
-#
-#SidPlay2_PlayMode = "M"
-
-# Use start-song information from SID ('yes') or start at first song
-# ('no').  Songs before the start-song won't be played.
-#SidPlay2_StartAtStart = yes
-
-# Play sub-tunes.
-#SidPlay2_PlaySubTunes = yes
-
-# Run the OnSongChange command when a new song starts playing.
-# Specify the full path (i.e. no leading '~') of an executable to run.
-# Arguments will be passed, and you can use the following escapes:
-#
-#     %a artist
-#     %r album
-#     %f filename
-#     %t title
-#     %n track
-#     %d file duration in XX:YY form
-#     %D file duration, number of seconds
-#
-# No pipes/redirects can be used directly, but writing a shell script
-# can do the job.
-#
-# Example:    OnSongChange = "/home/jack/.moc/myscript %a %r"
-#
-#OnSongChange =
-
-# If RepeatSongChange is 'yes' then MOC will execute the command every time
-# a song starts playing regardless of whether or not it is just repeating.
-# Otherwise the command will only be executed when a different song is
-# started.
-#RepeatSongChange = no
-
-# Run the OnStop command (full path, no arguments) when MOC changes state
-# to stopped (i.e., when user stopped playing or changes a song).
-#
-# Example:    OnStop = "/home/jack/.moc/myscript_on_stop"
-#
-#OnStop =
-
-# This option determines which song to play after finishing all the songs
-# in the queue.  Setting this to 'yes' causes MOC to play the song which
-# follows the song being played before queue playing started. If set to
-# 'no', MOC will play the song following the last song in the queue if it
-# is in the playlist.  The default is 'yes' because this is the way other
-# players usually behave.  (Note that this option previously took the
-# values 1 and 0; these are now deprecated in favour of 'yes' and 'no'.)
-#QueueNextSongReturn = yes
\ No newline at end of file
diff --git a/.moc/keymap.conf b/.moc/keymap.conf
deleted file mode 100644
index 84449a1..0000000
--- a/.moc/keymap.conf
+++ /dev/null
@@ -1,187 +0,0 @@
-# This is the example keymap file for MOC.  You can define your own key
-# bindings for MOC commands by creating your own keymap file and setting
-# the 'Keymap' option in ~/.moc/config.
-#
-# The format of this file is:
-#
-#     - Lines beginning with # are comments.
-#     - Blank lines are ignored.
-#     - Every other line is expected to be in one of the formats:
-#
-#           COMMAND = [KEY ...]
-#           COMMAND += KEY ...
-#
-# The KEY can be:
-#
-#     - Just a char, like i, L, ", *
-#     - CTRL-KEY sequence: ^k (CTRL-k), ^4
-#     - ALT-KEY (meta) sequence: M-j (ALT-j), M-/
-#     - Special keys: DOWN, UP
-#                     LEFT, RIGHT
-#                     HOME, END
-#                     BACKSPACE
-#                     INS, DEL
-#                     ENTER
-#                     PAGE_UP, PAGE_DOWN
-#                     SPACE, TAB
-#                     KEYPAD_CENTER
-#                     ESCAPE
-#                     F1 - F12
-#
-# Note that the use of a digit as a KEY is deprecated.
-#
-# Maximum number of KEYs for one COMMAND is 5.
-#
-# Omitting the KEY for a COMMAND will unbind all its default keys.  They
-# will also be automatically unbound when you bind new KEYs to it. Individual
-# default KEYs will be automatically unbound when they are explicitly bound
-# to some other COMMAND.
-#
-# Using the '+=' form will cause the KEYs to be appended to any existing
-# (default or explicit) bindings for the COMMAND.  Appending an existing
-# default binding for the same COMMAND will cause MOC to think of that KEY
-# as then being explicitly bound.
-#
-# Only one binding for any given COMMAND can appear in the keymap file.  One
-# exception to this is that if the default keys for a COMMAND are explicitly
-# unbound then a subsequent binding may appear for it.  A second exception
-# is that multiple appending bindings may appear.
-#
-# Meta-key detection is sensitive to the ESCDELAY environment variable (see
-# the manpage for ncurses(3)).  In its absence, MOC resets the default
-# delay to 25ms.  If you need to emulate meta-key sequences using the ESC
-# key, then you may need to set the value of ESCDELAY back to its ncurses
-# default of 1000ms (but doing so will make the response to the ESC key
-# sluggish).
-#
-# If MOC's keypresses are being filtered through some other program (in a
-# GUI environment, for example) which also does meta-key detection, then
-# MOC is at the mercy of the timings with which that program presents them.
-#
-# Default key configuration for MOC (and a list of all available commands):
-
-# MOC control keys:
-quit_client           = q
-quit                  = Q
-
-# Menu and interface control keys:
-go                    = ENTER
-menu_down             = ^n
-menu_up               = ^p
-menu_page_down        = PAGE_DOWN
-menu_page_up          = PAGE_UP
-menu_first_item       = HOME
-menu_last_item        = END
-search_menu           = g /
-toggle_read_tags      = f
-toggle_show_time      = ^t
-toggle_show_format    = ^f
-toggle_menu           = TAB
-toggle_layout         = l
-toggle_hidden_files   = H
-show_lyrics           = L
-theme_menu            = T
-help                  = h ?
-refresh               = ^r
-reload                = r
-
-# Audio playing and positioning keys:
-seek_forward          = RIGHT
-seek_backward         = LEFT
-seek_forward_fast     = ]
-seek_backward_fast    = [
-pause                 = SPACE
-stop                  = s
-next                  = N
-previous              = b
-toggle_shuffle        = S
-toggle_repeat         = R
-toggle_auto_next      = X
-toggle_mixer          = x
-go_url                = o
-
-# Volume control keys:
-volume_down_1         = <
-volume_up_1           = >
-volume_down_5         = ,
-volume_up_5           = .
-volume_10             = M-1
-volume_20             = M-2
-volume_30             = M-3
-volume_40             = M-4
-volume_50             = M-5
-volume_60             = M-6
-volume_70             = M-7
-volume_80             = M-8
-volume_90             = M-9
-
-# Directory navigation keys: defaults are Shift-number
-#                            (i.e., 'shift 1' -> '!' -> 'Fastdir1').
-go_to_a_directory     = i
-go_to_music_directory = m
-go_to_fast_dir1       = !
-go_to_fast_dir2       = @
-go_to_fast_dir3       = #
-go_to_fast_dir4       = $
-go_to_fast_dir5       = %
-go_to_fast_dir6       = ^
-go_to_fast_dir7       = &
-go_to_fast_dir8       = *
-go_to_fast_dir9       = (
-go_to_fast_dir10      = )
-go_to_playing_file    = G
-go_up                 = U
-
-# Playlist specific keys:
-add_file              = a
-add_directory         = A
-plist_add_stream      = ^u
-delete_from_playlist  = d
-playlist_full_paths   = P
-plist_move_up         = u
-plist_move_down       = j
-save_playlist         = V
-remove_dead_entries   = Y
-clear_playlist        = C
-
-# Queue manipulation keys:
-enqueue_file          = z
-clear_queue           = Z
-
-# User interaction control:
-history_up            = f
-history_down          = b
-delete_to_start       = ^u
-delete_to_end         = ^k
-cancel                = ^x ESCAPE
-hide_message          = M
-
-# Softmixer specific keys:
-toggle_softmixer      = w
-toggle_make_mono      = J
-
-# Equalizer specific keys:
-toggle_equalizer      = E
-equalizer_refresh     = e
-equalizer_prev        = K
-equalizer_next        = k
-
-# External commands:
-mark_start            = '
-mark_end              = "
-exec_command1         = F1
-exec_command2         = F2
-exec_command3         = F3
-exec_command4         = F4
-exec_command5         = F5
-exec_command6         = F6
-exec_command7         = F7
-exec_command8         = F8
-exec_command9         = F9
-exec_command10        = F10
-
-# The following commands are available but not assigned to any keys by
-# default:
-#
-#   toggle_percent	 Switch on/off play progress bar time percentage
-#
diff --git a/.moc/themes b/.moc/themes
deleted file mode 160000
-Subproject 3578cd99a73e81a07749c1ed79fad998c6da084