/* X Communication module for terminals which understand the X protocol. Copyright (C) 1989, 1992, 1993 Free Software Foundation, Inc. This file is part of GNU Emacs. GNU Emacs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU Emacs is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU Emacs; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Serious problems: Kludge: dup2 is used to put the X-connection socket into desc # 0 so that wait_reading_process_input will wait for it in place of actual terminal input. */ #define NEW_SELECTIONS #include "config.h" #ifdef HAVE_X_WINDOWS #include "lisp.h" #include "blockinput.h" /* On 4.3 these lose if they come after xterm.h. */ #include #include /* This may include sys/types.h, and that somehow loses if this is not done before the other system files. */ #include "xterm.h" #include #ifndef USG /* Load sys/types.h if not already loaded. In some systems loading it twice is suicidal. */ #ifndef makedev #include #endif /* makedev */ #endif /* USG */ #ifdef BSD #include #include #else /* ! defined (BSD) */ #ifndef VMS #include #include #endif #endif /* ! defined (BSD) */ /* Allow m- file to inhibit use of FIONREAD. */ #ifdef BROKEN_FIONREAD #undef FIONREAD #endif /* ! defined (BROKEN_FIONREAD) */ /* We are unable to use interrupts if FIONREAD is not available, so flush SIGIO so we won't try. */ #ifndef FIONREAD #ifdef SIGIO #undef SIGIO #endif /* ! defined (SIGIO) */ #endif /* FIONREAD */ #include "systime.h" #include #include #include #include #include #include #include "dispextern.h" #include "termhooks.h" #include "termopts.h" #include "termchar.h" #if 0 #include "sink.h" #include "sinkmask.h" #endif /* ! 0 */ #include "gnu.h" #include "frame.h" #include "disptab.h" #include "buffer.h" #include "window.h" #ifdef HAVE_X11 #define XMapWindow XMapRaised /* Raise them when mapping. */ #else /* ! defined (HAVE_X11) */ #include /*#include */ #endif /* ! defined (HAVE_X11) */ /* For sending Meta-characters. Do we need this? */ #define METABIT 0200 #define min(a,b) ((a)<(b) ? (a) : (b)) #define max(a,b) ((a)>(b) ? (a) : (b)) /* Nonzero means we must reprint all windows because 1) we received an ExposeWindow event or 2) we received too many ExposeRegion events to record. This is never needed under X11. */ static int expose_all_windows; /* Nonzero means we must reprint all icon windows. */ static int expose_all_icons; #ifndef HAVE_X11 /* ExposeRegion events, when received, are copied into this queue for later processing. */ static struct event_queue x_expose_queue; /* ButtonPressed and ButtonReleased events, when received, are copied into this queue for later processing. */ struct event_queue x_mouse_queue; #endif /* HAVE_X11 */ #if defined (SIGIO) && defined (FIONREAD) int BLOCK_INPUT_mask; #endif /* ! defined (SIGIO) && defined (FIONREAD) */ /* The id of a bitmap used for icon windows. One such map is shared by all Emacs icon windows. This is zero if we have not yet had a need to create the bitmap. */ static Bitmap icon_bitmap; /* Font used for text icons. */ static FONT_TYPE *icon_font_info; /* Stuff for dealing with the main icon title. */ extern Lisp_Object Vcommand_line_args; char *hostname, *x_id_name; /* This is the X connection that we are using. */ Display *x_current_display; /* The cursor to use for vertical scroll bars on x_current_display. */ static Cursor x_vertical_scroll_bar_cursor; /* Frame being updated by update_frame. This is declared in term.c. This is set by update_begin and looked at by all the XT functions. It is zero while not inside an update. In that case, the XT functions assume that `selected_frame' is the frame to apply to. */ extern struct frame *updating_frame; /* The frame (if any) which has the X window that has keyboard focus. Zero if none. This is examined by Ffocus_frame in frame.c. Note that a mere EnterNotify event can set this; if you need to know the last frame specified in a FocusIn or FocusOut event, use x_focus_event_frame. */ struct frame *x_focus_frame; /* The last frame mentioned in a FocusIn or FocusOut event. This is separate from x_focus_frame, because whether or not LeaveNotify events cause us to lose focus depends on whether or not we have received a FocusIn event for it. */ struct frame *x_focus_event_frame; /* The frame which currently has the visual highlight, and should get keyboard input (other sorts of input have the frame encoded in the event). It points to the X focus frame's selected window's frame. It differs from x_focus_frame when we're using a global minibuffer. */ static struct frame *x_highlight_frame; /* From .Xdefaults, the value of "emacs.WarpMouse". If non-zero, mouse is moved to inside of frame when frame is de-iconified. */ static int warp_mouse_on_deiconify; /* During an update, maximum vpos for ins/del line operations to affect. */ static int flexlines; /* During an update, nonzero if chars output now should be highlighted. */ static int highlight; /* Nominal cursor position -- where to draw output. During an update, these are different from the cursor-box position. */ static int curs_x; static int curs_y; #ifdef HAVE_X11 /* `t' if a mouse button is depressed. */ extern Lisp_Object Vmouse_depressed; /* Tells if a window manager is present or not. */ extern Lisp_Object Vx_no_window_manager; /* Timestamp that we requested selection data was made. */ extern Time requestor_time; /* ID of the window requesting selection data. */ extern Window requestor_window; /* Nonzero enables some debugging for the X interface code. */ extern int _Xdebug; #else /* ! defined (HAVE_X11) */ /* Bit patterns for the mouse cursor. */ short MouseCursor[] = { 0x0000, 0x0008, 0x0018, 0x0038, 0x0078, 0x00f8, 0x01f8, 0x03f8, 0x07f8, 0x00f8, 0x00d8, 0x0188, 0x0180, 0x0300, 0x0300, 0x0000}; short MouseMask[] = { 0x000c, 0x001c, 0x003c, 0x007c, 0x00fc, 0x01fc, 0x03fc, 0x07fc, 0x0ffc, 0x0ffc, 0x01fc, 0x03dc, 0x03cc, 0x0780, 0x0780, 0x0300}; static short grey_bits[] = { 0x0005, 0x000a, 0x0005, 0x000a}; static Pixmap GreyPixmap = 0; #endif /* ! defined (HAVE_X11) */ /* From time to time we get info on an Emacs window, here. */ static WINDOWINFO_TYPE windowinfo; extern int errno; /* See keyboard.c. */ extern int extra_keyboard_modifiers; extern Display *XOpenDisplay (); extern Window XCreateWindow (); extern Cursor XCreateCursor (); extern FONT_TYPE *XOpenFont (); static void flashback (); #ifndef HAVE_X11 static void dumpqueue (); #endif /* HAVE_X11 */ void dumpborder (); static int XTcursor_to (); static int XTclear_end_of_line (); /* Starting and ending updates. These hooks are called by update_frame at the beginning and end of a frame update. We record in `updating_frame' the identity of the frame being updated, so that the XT... functions do not need to take a frame as argument. Most of the XT... functions should never be called except during an update, the only exceptions being XTcursor_to, XTwrite_char and XTreassert_line_highlight. */ extern int mouse_track_top, mouse_track_left, mouse_track_width; static XTupdate_begin (f) struct frame *f; { int mask; if (f == 0) abort (); flexlines = f->height; highlight = 0; BLOCK_INPUT; #ifndef HAVE_X11 dumpqueue (); #endif /* HAVE_X11 */ UNBLOCK_INPUT; } #ifndef HAVE_X11 static void x_do_pending_expose (); #endif static XTupdate_end (f) struct frame *f; { int mask; if (updating_frame == 0 || updating_frame != f) abort (); BLOCK_INPUT; #ifndef HAVE_X11 dumpqueue (); x_do_pending_expose (); #endif /* HAVE_X11 */ x_display_cursor (f, 1); XFlushQueue (); UNBLOCK_INPUT; } /* External interface to control of standout mode. Call this when about to modify line at position VPOS and not change whether it is highlighted. */ XTreassert_line_highlight (new, vpos) int new, vpos; { highlight = new; } /* Call this when about to modify line at position VPOS and change whether it is highlighted. */ static XTchange_line_highlight (new_highlight, vpos, first_unused_hpos) int new_highlight, vpos, first_unused_hpos; { highlight = new_highlight; XTcursor_to (vpos, 0); XTclear_end_of_line (updating_frame->width); } /* This is used when starting Emacs and when restarting after suspend. When starting Emacs, no X window is mapped. And nothing must be done to Emacs's own window if it is suspended (though that rarely happens). */ static XTset_terminal_modes () { } /* This is called when exiting or suspending Emacs. Exiting will make the X-windows go away, and suspending requires no action. */ static XTreset_terminal_modes () { /* XTclear_frame (); */ } /* Set the nominal cursor position of the frame. This is where display update commands will take effect. This does not affect the place where the cursor-box is displayed. */ static int XTcursor_to (row, col) register int row, col; { int mask; int orow = row; curs_x = col; curs_y = row; if (updating_frame == 0) { BLOCK_INPUT; x_display_cursor (selected_frame, 1); XFlushQueue (); UNBLOCK_INPUT; } } /* Display a sequence of N glyphs found at GP. WINDOW is the x-window to output to. LEFT and TOP are starting coords. HL is 1 if this text is highlighted, 2 if the cursor is on it. FONT is the default font to use (for glyphs whose font-code is 0). */ static void dumpglyphs (f, left, top, gp, n, hl, font) struct frame *f; int left, top; register GLYPH *gp; /* Points to first GLYPH. */ register int n; /* Number of glyphs to display. */ int hl; FONT_TYPE *font; { register int len; Window window = FRAME_X_WINDOW (f); GC drawing_gc = (hl == 2 ? f->display.x->cursor_gc : (hl ? f->display.x->reverse_gc : f->display.x->normal_gc)); if (sizeof (GLYPH) == sizeof (XChar2b)) XDrawImageString16 (x_current_display, window, drawing_gc, left, top + FONT_BASE (font), (XChar2b *) gp, n); else if (sizeof (GLYPH) == sizeof (unsigned char)) XDrawImageString (x_current_display, window, drawing_gc, left, top + FONT_BASE (font), (char *) gp, n); else /* What size of glyph ARE you using? And does X have a function to draw them? */ abort (); } #if 0 static void dumpglyphs (f, left, top, gp, n, hl, font) struct frame *f; int left, top; register GLYPH *gp; /* Points to first GLYPH. */ register int n; /* Number of glyphs to display. */ int hl; FONT_TYPE *font; { char buf[f->width]; /* Holds characters to be displayed. */ register char *cp; /* Steps through buf[]. */ register int tlen = GLYPH_TABLE_LENGTH; register Lisp_Object *tbase = GLYPH_TABLE_BASE; Window window = FRAME_X_WINDOW (f); int cursor_pixel = f->display.x->cursor_pixel; int fg_pixel = f->display.x->foreground_pixel; int bg_pixel = f->display.x->background_pixel; int intborder = f->display.x->internal_border_width; while (n) { /* Get the face-code of the next GLYPH. */ int cf, len; int g = *gp; while (GLYPH_ALIAS_P (tbase, tlen, g)) g = GLYPH_ALIAS (tbase, g); cf = g >> 8; /* Find the run of consecutive glyphs with the same face-code. Extract their character codes into BUF. */ cp = buf; while (n > 0) { g = *gp; while (GLYPH_ALIAS_P (tbase, tlen, g)) g = GLYPH_ALIAS (tbase, g); if ((g >> 8) != cf) break; *cp++ = 0377 & g; --n; ++gp; } /* LEN gets the length of the run. */ len = cp - buf; /* Now output this run of chars, with the font and pixel values determined by the face code CF. */ if (cf == 0) { #ifdef HAVE_X11 GC GC_cursor = f->display.x->cursor_gc; GC GC_reverse = f->display.x->reverse_gc; GC GC_normal = f->display.x->normal_gc; XDrawImageString (x_current_display, window, (hl == 2 ? GC_cursor : (hl ? GC_reverse : GC_normal)), left, top + FONT_BASE (font), buf, len); #else /* ! defined (HAVE_X11) */ XText (window, left, top, buf, len, font->id, (hl == 2 ? (cursor_pixel == fg_pixel ? bg_pixel : fg_pixel) : hl ? bg_pixel : fg_pixel), (hl == 2 ? cursor_pixel : hl ? fg_pixel : bg_pixel)); #endif /* ! defined (HAVE_X11) */ } else { #ifdef HAVE_X11 if (FACE_IS_FONT (cf)) XDrawImageString (x_current_display, FRAME_X_WINDOW (f), FACE_GC (cf), left, top + FONT_BASE (FACE_FONT (cf)), buf, len); else if (FACE_IS_IMAGE (cf)) XCopyPlane (x_current_display, FACE_IMAGE (cf), FRAME_X_WINDOW (f), f->display.x->normal_gc, 0, 0, FACE_IMAGE_WIDTH (cf), FACE_IMAGE_HEIGHT (cf), left, top); else abort (); #else /* ! defined (HAVE_X11) */ register struct face *fp = x_face_table[cf]; XText (window, left, top, buf, len, fp->font->id, (hl == 2 ? (cursor_pixel == fp->fg ? fp->bg : fp->fg) : hl ? fp->bg : fp->fg), (hl == 2 ? cursor_pixel : hl ? fp->fg : fp->bg)); #endif /* ! defined (HAVE_X11) */ } left += len * FONT_WIDTH (font); } } #endif /* ! 0 */ /* Output some text at the nominal frame cursor position. Advance the cursor over the text. Output LEN glyphs at START. `highlight', set up by XTreassert_line_highlight or XTchange_line_highlight, controls the pixel values used for foreground and background. */ static XTwrite_glyphs (start, len) register GLYPH *start; int len; { register int temp_length; int mask; struct frame *f; BLOCK_INPUT; f = updating_frame; if (f == 0) { f = selected_frame; /* If not within an update, output at the frame's visible cursor. */ curs_x = f->cursor_x; curs_y = f->cursor_y; } dumpglyphs (f, CHAR_TO_PIXEL_COL (f, curs_x), CHAR_TO_PIXEL_ROW (f, curs_y), start, len, highlight, f->display.x->font); /* If we drew on top of the cursor, note that it is turned off. */ if (curs_y == f->phys_cursor_y && curs_x <= f->phys_cursor_x && curs_x + len > f->phys_cursor_x) f->phys_cursor_x = -1; if (updating_frame == 0) { f->cursor_x += len; x_display_cursor (f, 1); f->cursor_x -= len; } else curs_x += len; UNBLOCK_INPUT; } /* Clear to the end of the line. Erase the current text line from the nominal cursor position (inclusive) to column FIRST_UNUSED (exclusive). The idea is that everything from FIRST_UNUSED onward is already erased. */ static int XTclear_end_of_line (first_unused) register int first_unused; { struct frame *f = updating_frame; int mask; if (f == 0) abort (); if (curs_y < 0 || curs_y >= f->height) return; if (first_unused <= 0) return; if (first_unused >= f->width) first_unused = f->width; BLOCK_INPUT; /* Notice if the cursor will be cleared by this operation. */ if (curs_y == f->phys_cursor_y && curs_x <= f->phys_cursor_x && f->phys_cursor_x < first_unused) f->phys_cursor_x = -1; #ifdef HAVE_X11 XClearArea (x_current_display, FRAME_X_WINDOW (f), CHAR_TO_PIXEL_COL (f, curs_x), CHAR_TO_PIXEL_ROW (f, curs_y), FONT_WIDTH (f->display.x->font) * (first_unused - curs_x), FONT_HEIGHT (f->display.x->font), False); #else /* ! defined (HAVE_X11) */ XPixSet (FRAME_X_WINDOW (f), CHAR_TO_PIXEL_COL (f, curs_x), CHAR_TO_PIXEL_ROW (f, curs_y), FONT_WIDTH (f->display.x->font) * (first_unused - curs_x), FONT_HEIGHT (f->display.x->font), f->display.x->background_pixel); #endif /* ! defined (HAVE_X11) */ UNBLOCK_INPUT; } static XTclear_frame () { int mask; struct frame *f = updating_frame; if (f == 0) f = selected_frame; f->phys_cursor_x = -1; /* Cursor not visible. */ curs_x = 0; /* Nominal cursor position is top left. */ curs_y = 0; BLOCK_INPUT; XClear (FRAME_X_WINDOW (f)); /* We have to clear the scroll bars, too. If we have changed colors or something like that, then they should be notified. */ x_scroll_bar_clear (f); #ifndef HAVE_X11 dumpborder (f, 0); #endif /* HAVE_X11 */ XFlushQueue (); UNBLOCK_INPUT; } /* Invert the middle quarter of the frame for .15 sec. */ /* We use the select system call to do the waiting, so we have to make sure it's avaliable. If it isn't, we just won't do visual bells. */ #if defined (HAVE_TIMEVAL) && defined (HAVE_SELECT) /* Subtract the `struct timeval' values X and Y, storing the result in RESULT. Return 1 if the difference is negative, otherwise 0. */ static int timeval_subtract (result, x, y) struct timeval *result, x, y; { /* Perform the carry for the later subtraction by updating y. This is safer because on some systems the tv_sec member is unsigned. */ if (x.tv_usec < y.tv_usec) { int nsec = (y.tv_usec - x.tv_usec) / 1000000 + 1; y.tv_usec -= 1000000 * nsec; y.tv_sec += nsec; } if (x.tv_usec - y.tv_usec > 1000000) { int nsec = (y.tv_usec - x.tv_usec) / 1000000; y.tv_usec += 1000000 * nsec; y.tv_sec -= nsec; } /* Compute the time remaining to wait. tv_usec is certainly positive. */ result->tv_sec = x.tv_sec - y.tv_sec; result->tv_usec = x.tv_usec - y.tv_usec; /* Return indication of whether the result should be considered negative. */ return x.tv_sec < y.tv_sec; } XTflash (f) struct frame *f; { BLOCK_INPUT; { GC gc; /* Create a GC that will use the GXxor function to flip foreground pixels into background pixels. */ { XGCValues values; values.function = GXxor; values.foreground = (f->display.x->foreground_pixel ^ f->display.x->background_pixel); gc = XCreateGC (x_current_display, FRAME_X_WINDOW (f), GCFunction | GCForeground, &values); } { int width = PIXEL_WIDTH (f); int height = PIXEL_HEIGHT (f); XFillRectangle (x_current_display, FRAME_X_WINDOW (f), gc, width/4, height/4, width/2, height/2); XFlush (x_current_display); { struct timeval wakeup, now; gettimeofday (&wakeup, (struct timezone *) 0); /* Compute time to wait until, propagating carry from usecs. */ wakeup.tv_usec += 150000; wakeup.tv_sec += (wakeup.tv_usec / 1000000); wakeup.tv_usec %= 1000000; /* Keep waiting until past the time wakeup. */ while (1) { struct timeval timeout; gettimeofday (&timeout, (struct timezone *)0); /* In effect, timeout = wakeup - timeout. Break if result would be negative. */ if (timeval_subtract (&timeout, wakeup, timeout)) break; /* Try to wait that long--but we might wake up sooner. */ select (0, 0, 0, 0, &timeout); } } XFillRectangle (x_current_display, FRAME_X_WINDOW (f), gc, width/4, height/4, width/2, height/2); XFreeGC (x_current_display, gc); XFlush (x_current_display); } } UNBLOCK_INPUT; } #endif /* Make audible bell. */ #ifdef HAVE_X11 #define XRINGBELL XBell(x_current_display, 0) #else /* ! defined (HAVE_X11) */ #define XRINGBELL XFeep(0); #endif /* ! defined (HAVE_X11) */ XTring_bell () { #if defined (HAVE_TIMEVAL) && defined (HAVE_SELECT) if (visible_bell) XTflash (selected_frame); else #endif { BLOCK_INPUT; XRINGBELL; XFlushQueue (); UNBLOCK_INPUT; } } /* Insert and delete character. These are not supposed to be used because we are supposed to turn off the feature of using them. */ static XTinsert_glyphs (start, len) register char *start; register int len; { abort (); } static XTdelete_glyphs (n) register int n; { abort (); } /* Specify how many text lines, from the top of the window, should be affected by insert-lines and delete-lines operations. This, and those operations, are used only within an update that is bounded by calls to XTupdate_begin and XTupdate_end. */ static XTset_terminal_window (n) register int n; { if (updating_frame == 0) abort (); if ((n <= 0) || (n > updating_frame->height)) flexlines = updating_frame->height; else flexlines = n; } /* Perform an insert-lines operation. Insert N lines at a vertical position curs_y. */ static void stufflines (n) register int n; { register int topregion, bottomregion; register int length, newtop, mask; register struct frame *f = updating_frame; int intborder = f->display.x->internal_border_width; if (curs_y >= flexlines) return; topregion = curs_y; bottomregion = flexlines - (n + 1); newtop = topregion + n; length = (bottomregion - topregion) + 1; #ifndef HAVE_X11 dumpqueue (); #endif /* HAVE_X11 */ if ((length > 0) && (newtop <= flexlines)) { #ifdef HAVE_X11 XCopyArea (x_current_display, FRAME_X_WINDOW (f), FRAME_X_WINDOW (f), f->display.x->normal_gc, intborder, CHAR_TO_PIXEL_ROW (f, topregion), f->width * FONT_WIDTH (f->display.x->font), length * FONT_HEIGHT (f->display.x->font), intborder, CHAR_TO_PIXEL_ROW (f, newtop)); #else /* ! defined (HAVE_X11) */ XMoveArea (FRAME_X_WINDOW (f), intborder, CHAR_TO_PIXEL_ROW (f, topregion), intborder, CHAR_TO_PIXEL_ROW (f, newtop), f->width * FONT_WIDTH (f->display.x->font), length * FONT_HEIGHT (f->display.x->font)); /* Now we must process any ExposeRegion events that occur if the area being copied from is obscured. We can't let it wait because further i/d operations may want to copy this area to another area. */ x_read_exposes (); #endif /* ! defined (HAVE_X11) */ } newtop = min (newtop, (flexlines - 1)); length = newtop - topregion; if (length > 0) { #ifdef HAVE_X11 XClearArea (x_current_display, FRAME_X_WINDOW (f), intborder, CHAR_TO_PIXEL_ROW (f, topregion), f->width * FONT_WIDTH (f->display.x->font), n * FONT_HEIGHT (f->display.x->font), False); #else /* ! defined (HAVE_X11) */ XPixSet (FRAME_X_WINDOW (f), intborder, CHAR_TO_PIXEL_ROW (f, topregion), f->width * FONT_WIDTH (f->display.x->font), n * FONT_HEIGHT (f->display.x->font), f->display.x->background_pixel); #endif /* ! defined (HAVE_X11) */ } } /* Perform a delete-lines operation, deleting N lines at a vertical position curs_y. */ static void scraplines (n) register int n; { int mask; register struct frame *f = updating_frame; int intborder = f->display.x->internal_border_width; if (curs_y >= flexlines) return; #ifndef HAVE_X11 dumpqueue (); #endif /* HAVE_X11 */ if ((curs_y + n) >= flexlines) { if (flexlines >= (curs_y + 1)) { #ifdef HAVE_X11 XClearArea (x_current_display, FRAME_X_WINDOW (f), intborder, CHAR_TO_PIXEL_ROW (f, curs_y), f->width * FONT_WIDTH (f->display.x->font), (flexlines - curs_y) * FONT_HEIGHT (f->display.x->font), False); #else /* ! defined (HAVE_X11) */ XPixSet (FRAME_X_WINDOW (f), intborder, CHAR_TO_PIXEL_ROW (f, curs_y), f->width * FONT_WIDTH (f->display.x->font), (flexlines - curs_y) * FONT_HEIGHT (f->display.x->font), f->display.x->background_pixel); #endif /* ! defined (HAVE_X11) */ } } else { #ifdef HAVE_X11 XCopyArea (x_current_display, FRAME_X_WINDOW (f), FRAME_X_WINDOW (f), f->display.x->normal_gc, intborder, CHAR_TO_PIXEL_ROW (f, curs_y + n), f->width * FONT_WIDTH (f->display.x->font), (flexlines - (curs_y + n)) * FONT_HEIGHT (f->display.x->font), intborder, CHAR_TO_PIXEL_ROW (f, curs_y)); XClearArea (x_current_display, FRAME_X_WINDOW (f), intborder, CHAR_TO_PIXEL_ROW (f, flexlines - n), f->width * FONT_WIDTH (f->display.x->font), n * FONT_HEIGHT (f->display.x->font), False); #else /* ! defined (HAVE_X11) */ XMoveArea (FRAME_X_WINDOW (f), intborder, CHAR_TO_PIXEL_ROW (f, curs_y + n), intborder, CHAR_TO_PIXEL_ROW (f, curs_y), f->width * FONT_WIDTH (f->display.x->font), (flexlines - (curs_y + n)) * FONT_HEIGHT (f->display.x->font)); /* Now we must process any ExposeRegion events that occur if the area being copied from is obscured. We can't let it wait because further i/d operations may want to copy this area to another area. */ x_read_exposes (); XPixSet (FRAME_X_WINDOW (f), intborder, CHAR_TO_PIXEL_ROW (f, flexlines - n), f->width * FONT_WIDTH (f->display.x->font), n * FONT_HEIGHT (f->display.x->font), f->display.x->background_pixel); #endif /* ! defined (HAVE_X11) */ } } /* Perform an insert-lines or delete-lines operation, inserting N lines or deleting -N lines at vertical position VPOS. */ XTins_del_lines (vpos, n) int vpos, n; { if (updating_frame == 0) abort (); /* Hide the cursor. */ x_display_cursor (updating_frame, 0); XTcursor_to (vpos, 0); BLOCK_INPUT; if (n >= 0) stufflines (n); else scraplines (-n); XFlushQueue (); UNBLOCK_INPUT; } /* Support routines for exposure events. */ static void clear_cursor (); /* Output into a rectangle of an X-window (for frame F) the characters in f->phys_lines that overlap that rectangle. TOP and LEFT are the position of the upper left corner of the rectangle. ROWS and COLS are the size of the rectangle. */ static void dumprectangle (f, left, top, cols, rows) struct frame *f; register int left, top, cols, rows; { register struct frame_glyphs *active_frame = FRAME_CURRENT_GLYPHS (f); int cursor_cleared = 0; int bottom, right; register int y; if (FRAME_GARBAGED_P (f)) return; /* Express rectangle as four edges, instead of position-and-size. */ bottom = top + rows; right = left + cols; #ifndef HAVE_X11 /* Window manger does this for X11. */ { int intborder = f->display.x->internal_border_width; /* If the rectangle includes any of the internal border area, redisplay the border emphasis. */ if (top < intborder || left < intborder || bottom > intborder + f->height * FONT_HEIGHT (f->display.x->font) || right > intborder + f->width * FONT_WIDTH (f->display.x->font)) dumpborder (f, 0); } #endif /* HAVE_X11 /* Window manger does this for X11. */ */ /* Convert rectangle edges in pixels to edges in chars. Round down for left and top, up for right and bottom. */ top = PIXEL_TO_CHAR_ROW (f, top); left = PIXEL_TO_CHAR_COL (f, left); bottom += (FONT_HEIGHT (f->display.x->font) - 1); right += (FONT_WIDTH (f->display.x->font) - 1); bottom = PIXEL_TO_CHAR_ROW (f, bottom); right = PIXEL_TO_CHAR_COL (f, right); /* Clip the rectangle to what can be visible. */ if (left < 0) left = 0; if (top < 0) top = 0; if (right > f->width) right = f->width; if (bottom > f->height) bottom = f->height; /* Get size in chars of the rectangle. */ cols = right - left; rows = bottom - top; /* If rectangle has zero area, return. */ if (rows <= 0) return; if (cols <= 0) return; /* Turn off the cursor if it is in the rectangle. We will turn it back on afterward. */ if ((f->phys_cursor_x >= left) && (f->phys_cursor_x < right) && (f->phys_cursor_y >= top) && (f->phys_cursor_y < bottom)) { clear_cursor (f); cursor_cleared = 1; } /* Display the text in the rectangle, one text line at a time. */ for (y = top; y < bottom; y++) { GLYPH *line = &active_frame->glyphs[y][left]; if (! active_frame->enable[y] || left > active_frame->used[y]) continue; dumpglyphs (f, CHAR_TO_PIXEL_COL (f, left), CHAR_TO_PIXEL_ROW (f, y), line, min (cols, active_frame->used[y] - left), active_frame->highlight[y], f->display.x->font); } /* Turn the cursor on if we turned it off. */ if (cursor_cleared) x_display_cursor (f, 1); } #ifndef HAVE_X11 /* Process all queued ExposeRegion events. */ static void dumpqueue () { register int i; XExposeRegionEvent r; while (dequeue_event (&r, &x_expose_queue)) { struct frame *f = x_window_to_frame (r.window); if (f->display.x->icon_desc == r.window) refreshicon (f); else dumprectangle (f, r.x, r.y, r.width, r.height); } XFlushQueue (); } #endif /* HAVE_X11 */ /* Process all expose events that are pending, for X10. Redraws the cursor if necessary on any frame that is not in the process of being updated with update_frame. */ #ifndef HAVE_X11 static void x_do_pending_expose () { int mask; struct frame *f; Lisp_Object tail, frame; if (expose_all_windows) { expose_all_windows = 0; for (tail = Vframe_list; CONSP (tail); tail = XCONS (tail)->cdr) { register int temp_width, temp_height; int intborder; frame = XCONS (tail)->car; if (XGCTYPE (frame) != Lisp_Frame) continue; f = XFRAME (frame); if (! FRAME_X_P (f)) continue; if (!f->async_visible) continue; if (!f->display.x->needs_exposure) continue; intborder = f->display.x->internal_border_width; clear_cursor (f); XGetWindowInfo (FRAME_X_WINDOW (f), &windowinfo); temp_width = ((windowinfo.width - 2 * intborder - f->display.x->v_scroll_bar_width) / FONT_WIDTH (f->display.x->font)); temp_height = ((windowinfo.height- 2 * intborder - f->display.x->h_scroll_bar_height) / FONT_HEIGHT (f->display.x->font)); if (temp_width != f->width || temp_height != f->height) { change_frame_size (f, max (1, temp_height), max (1, temp_width), 0, 1); x_resize_scroll_bars (f); } f->display.x->left_pos = windowinfo.x; f->display.x->top_pos = windowinfo.y; dumprectangle (f, 0, 0, PIXEL_WIDTH (f), PIXEL_HEIGHT (f)); #if 0 dumpborder (f, 0); #endif /* ! 0 */ f->display.x->needs_exposure = 0; if (updating_frame != f) x_display_cursor (f, 1); XFlushQueue (); } } else /* Handle any individual-rectangle expose events queued for various windows. */ #ifdef HAVE_X11 ; #else /* ! defined (HAVE_X11) */ dumpqueue (); #endif /* ! defined (HAVE_X11) */ } #endif #ifdef HAVE_X11 static void frame_highlight (frame) struct frame *frame; { if (! EQ (Vx_no_window_manager, Qnil)) XSetWindowBorder (x_current_display, FRAME_X_WINDOW (frame), frame->display.x->border_pixel); x_display_cursor (frame, 1); } static void frame_unhighlight (frame) struct frame *frame; { if (! EQ (Vx_no_window_manager, Qnil)) XSetWindowBorderPixmap (x_current_display, FRAME_X_WINDOW (frame), frame->display.x->border_tile); x_display_cursor (frame, 1); } #else /* ! defined (HAVE_X11) */ /* Dump the border-emphasis of frame F. If F is selected, this is a lining of the same color as the border, just within the border, occupying a portion of the internal border. If F is not selected, it is background in the same place. If ALWAYS is 0, don't bother explicitly drawing if it's background. ALWAYS = 1 is used when a frame becomes selected or deselected. In that case, we also turn the cursor off and on again so it will appear in the proper shape (solid if selected; else hollow.) */ static void dumpborder (f, always) struct frame *f; int always; { int thickness = f->display.x->internal_border_width / 2; int width = PIXEL_WIDTH (f); int height = PIXEL_HEIGHT (f); int pixel; if (f != selected_frame) { if (!always) return; pixel = f->display.x->background_pixel; } else { pixel = f->display.x->border_pixel; } XPixSet (FRAME_X_WINDOW (f), 0, 0, width, thickness, pixel); XPixSet (FRAME_X_WINDOW (f), 0, 0, thickness, height, pixel); XPixSet (FRAME_X_WINDOW (f), 0, height - thickness, width, thickness, pixel); XPixSet (FRAME_X_WINDOW (f), width - thickness, 0, thickness, height, pixel); if (always) x_display_cursor (f, 1); } #endif /* ! defined (HAVE_X11) */ static void XTframe_rehighlight (); /* The focus has changed. Update the frames as necessary to reflect the new situation. Note that we can't change the selected frame here, because the lisp code we are interrupting might become confused. Each event gets marked with the frame in which it occured, so the lisp code can tell when the switch took place by examining the events. */ static void x_new_focus_frame (frame) struct frame *frame; { struct frame *old_focus = x_focus_frame; int events_enqueued = 0; if (frame != x_focus_frame) { /* Set this before calling other routines, so that they see the correct value of x_focus_frame. */ x_focus_frame = frame; if (old_focus && old_focus->auto_lower) x_lower_frame (old_focus); #if 0 selected_frame = frame; XSET (XWINDOW (selected_frame->selected_window)->frame, Lisp_Frame, selected_frame); Fselect_window (selected_frame->selected_window); choose_minibuf_frame (); #endif /* ! 0 */ if (x_focus_frame && x_focus_frame->auto_raise) x_raise_frame (x_focus_frame); } XTframe_rehighlight (); } /* The focus has changed, or we have redirected a frame's focus to another frame (this happens when a frame uses a surrogate minibuffer frame). Shift the highlight as appropriate. */ static void XTframe_rehighlight () { struct frame *old_highlight = x_highlight_frame; if (x_focus_frame) { x_highlight_frame = ((XGCTYPE (FRAME_FOCUS_FRAME (x_focus_frame)) == Lisp_Frame) ? XFRAME (FRAME_FOCUS_FRAME (x_focus_frame)) : x_focus_frame); if (! FRAME_LIVE_P (x_highlight_frame)) { FRAME_FOCUS_FRAME (x_focus_frame) = Qnil; x_highlight_frame = x_focus_frame; } } else x_highlight_frame = 0; if (x_highlight_frame != old_highlight) { if (old_highlight) frame_unhighlight (old_highlight); if (x_highlight_frame) frame_highlight (x_highlight_frame); } } /* Mouse clicks and mouse movement. Rah. */ #ifdef HAVE_X11 /* Given a pixel position (PIX_X, PIX_Y) on the frame F, return glyph co-ordinates in (*X, *Y). Set *BOUNDS to the rectangle that the glyph at X, Y occupies, if BOUNDS != 0. */ static void pixel_to_glyph_coords (f, pix_x, pix_y, x, y, bounds) FRAME_PTR f; register unsigned int pix_x, pix_y; register int *x, *y; XRectangle *bounds; { pix_x = PIXEL_TO_CHAR_COL (f, pix_x); pix_y = PIXEL_TO_CHAR_ROW (f, pix_y); if (bounds) { bounds->width = FONT_WIDTH (f->display.x->font); bounds->height = FONT_HEIGHT (f->display.x->font); bounds->x = CHAR_TO_PIXEL_COL (f, pix_x); bounds->y = CHAR_TO_PIXEL_ROW (f, pix_y); } if (pix_x < 0) pix_x = 0; else if (pix_x > f->width) pix_x = f->width; if (pix_y < 0) pix_y = 0; else if (pix_y > f->height) pix_y = f->height; *x = pix_x; *y = pix_y; } /* Any buttons grabbed. */ unsigned int x_mouse_grabbed; /* Which modifier keys are on which modifier bits? With each keystroke, X returns eight bits indicating which modifier keys were held down when the key was pressed. The interpretation of the top five modifier bits depends on what keys are attached to them. If the Meta_L and Meta_R keysyms are on mod5, then mod5 is the meta bit. x_meta_mod_mask is a mask containing the bits used for the meta key. It may have more than one bit set, if more than one modifier bit has meta keys on it. Basically, if EVENT is a KeyPress event, the meta key is pressed if (EVENT.state & x_meta_mod_mask) != 0. x_shift_lock_mask is LockMask if the XK_Shift_Lock keysym is on the lock modifier bit, or zero otherwise. Non-alphabetic keys should only be affected by the lock modifier bit if XK_Shift_Lock is in use; XK_Caps_Lock should only affect alphabetic keys. With this arrangement, the lock modifier should shift the character if (EVENT.state & x_shift_lock_mask) != 0. */ static int x_meta_mod_mask, x_shift_lock_mask; /* These are like x_meta_mod_mask, but for different modifiers. */ static int x_alt_mod_mask, x_super_mod_mask, x_hyper_mod_mask; /* Initialize mode_switch_bit and modifier_meaning. */ static void x_find_modifier_meanings () { int min_code, max_code; KeySym *syms; int syms_per_code; XModifierKeymap *mods; x_meta_mod_mask = 0; x_shift_lock_mask = 0; x_alt_mod_mask = 0; x_super_mod_mask = 0; x_hyper_mod_mask = 0; #ifdef HAVE_X11R4 XDisplayKeycodes (x_current_display, &min_code, &max_code); #else min_code = x_current_display->min_keycode; max_code = x_current_display->max_keycode; #endif syms = XGetKeyboardMapping (x_current_display, min_code, max_code - min_code + 1, &syms_per_code); mods = XGetModifierMapping (x_current_display); /* Scan the modifier table to see which modifier bits the Meta and Alt keysyms are on. */ { int row, col; /* The row and column in the modifier table. */ for (row = 3; row < 8; row++) for (col = 0; col < mods->max_keypermod; col++) { KeyCode code = mods->modifiermap[(row * mods->max_keypermod) + col]; /* Are any of this keycode's keysyms a meta key? */ { int code_col; for (code_col = 0; code_col < syms_per_code; code_col++) { int sym = syms[((code - min_code) * syms_per_code) + code_col]; switch (sym) { case XK_Meta_L: case XK_Meta_R: x_meta_mod_mask |= (1 << row); break; case XK_Alt_L: case XK_Alt_R: x_alt_mod_mask |= (1 << row); break; case XK_Hyper_L: case XK_Hyper_R: x_hyper_mod_mask |= (1 << row); break; case XK_Super_L: case XK_Super_R: x_super_mod_mask |= (1 << row); break; case XK_Shift_Lock: /* Ignore this if it's not on the lock modifier. */ if ((1 << row) == LockMask) x_shift_lock_mask = LockMask; break; } } } } } /* If we couldn't find any meta keys, accept any alt keys as meta keys. */ if (! x_meta_mod_mask) { x_meta_mod_mask = x_alt_mod_mask; x_alt_mod_mask = 0; } XFree ((char *) syms); XFreeModifiermap (mods); } /* Convert a set of X modifier bits to the proper form for a struct input_event modifiers value. */ static unsigned int x_convert_modifiers (state) unsigned int state; { return ( ((state & (ShiftMask | x_shift_lock_mask)) ? shift_modifier : 0) | ((state & ControlMask) ? ctrl_modifier : 0) | ((state & x_meta_mod_mask) ? meta_modifier : 0) | ((state & x_alt_mod_mask) ? alt_modifier : 0) | ((state & x_super_mod_mask) ? super_modifier : 0) | ((state & x_hyper_mod_mask) ? hyper_modifier : 0)); } /* Prepare a mouse-event in *RESULT for placement in the input queue. If the event is a button press, then note that we have grabbed the mouse. */ static Lisp_Object construct_mouse_click (result, event, f) struct input_event *result; XButtonEvent *event; struct frame *f; { /* Make the event type no_event; we'll change that when we decide otherwise. */ result->kind = mouse_click; XSET (result->code, Lisp_Int, event->button - Button1); result->timestamp = event->time; result->modifiers = (x_convert_modifiers (event->state) | (event->type == ButtonRelease ? up_modifier : down_modifier)); /* Notice if the mouse is still grabbed. */ if (event->type == ButtonPress) { if (! x_mouse_grabbed) Vmouse_depressed = Qt; x_mouse_grabbed |= (1 << event->button); } else if (event->type == ButtonRelease) { x_mouse_grabbed &= ~(1 << event->button); if (!x_mouse_grabbed) Vmouse_depressed = Qnil; } { int row, column; pixel_to_glyph_coords (f, event->x, event->y, &column, &row, NULL); XFASTINT (result->x) = column; XFASTINT (result->y) = row; XSET (result->frame_or_window, Lisp_Frame, f); } } /* Mouse movement. Rah. In order to avoid asking for motion events and then throwing most of them away or busy-polling the server for mouse positions, we ask the server for pointer motion hints. This means that we get only one event per group of mouse movements. "Groups" are delimited by other kinds of events (focus changes and button clicks, for example), or by XQueryPointer calls; when one of these happens, we get another MotionNotify event the next time the mouse moves. This is at least as efficient as getting motion events when mouse tracking is on, and I suspect only negligibly worse when tracking is off. The silly O'Reilly & Associates Nutshell guides barely document pointer motion hints at all (I think you have to infer how they work from an example), and the description of XQueryPointer doesn't mention that calling it causes you to get another motion hint from the server, which is very important. */ /* Where the mouse was last time we reported a mouse event. */ static FRAME_PTR last_mouse_frame; static XRectangle last_mouse_glyph; /* The scroll bar in which the last X motion event occurred. If the last X motion event occured in a scroll bar, we set this so XTmouse_position can know whether to report a scroll bar motion or an ordinary motion. If the last X motion event didn't occur in a scroll bar, we set this to Qnil, to tell XTmouse_position to return an ordinary motion event. */ static Lisp_Object last_mouse_scroll_bar; /* This is a hack. We would really prefer that XTmouse_position would return the time associated with the position it returns, but there doesn't seem to be any way to wrest the timestamp from the server along with the position query. So, we just keep track of the time of the last movement we received, and return that in hopes that it's somewhat accurate. */ static Time last_mouse_movement_time; /* Function to report a mouse movement to the mainstream Emacs code. The input handler calls this. We have received a mouse movement event, which is given in *event. If the mouse is over a different glyph than it was last time, tell the mainstream emacs code by setting mouse_moved. If not, ask for another motion event, so we can check again the next time it moves. */ static void note_mouse_movement (frame, event) FRAME_PTR frame; XMotionEvent *event; { last_mouse_movement_time = event->time; /* Has the mouse moved off the glyph it was on at the last sighting? */ if (event->x < last_mouse_glyph.x || event->x >= last_mouse_glyph.x + last_mouse_glyph.width || event->y < last_mouse_glyph.y || event->y >= last_mouse_glyph.y + last_mouse_glyph.height) { mouse_moved = 1; last_mouse_scroll_bar = Qnil; } else { /* It's on the same glyph. Call XQueryPointer so we'll get an event the next time the mouse moves and we can see if it's *still* on the same glyph. */ int dummy; XQueryPointer (event->display, event->window, (Window *) &dummy, (Window *) &dummy, &dummy, &dummy, &dummy, &dummy, (unsigned int *) &dummy); } } static struct scroll_bar *x_window_to_scroll_bar (); static void x_scroll_bar_report_motion (); /* Return the current position of the mouse. If the mouse movement started in a scroll bar, set *f, *bar_window, and *part to the frame, window, and scroll bar part that the mouse is over. Set *x and *y to the portion and whole of the mouse's position on the scroll bar. If the mouse movement started elsewhere, set *f to the frame the mouse is on, *bar_window to nil, and *x and *y to the character cell the mouse is over. Set *time to the server timestamp for the time at which the mouse was at this position. This clears the mouse_moved flag, so we can wait for the next mouse movement. This also calls XQueryPointer, which will cause the server to give us another MotionNotify when the mouse moves again. */ static void XTmouse_position (f, bar_window, part, x, y, time) FRAME_PTR *f; Lisp_Object *bar_window; enum scroll_bar_part *part; Lisp_Object *x, *y; unsigned long *time; { BLOCK_INPUT; if (! NILP (last_mouse_scroll_bar)) x_scroll_bar_report_motion (f, bar_window, part, x, y, time); else { Window root; int root_x, root_y; Window dummy_window; int dummy; mouse_moved = 0; last_mouse_scroll_bar = Qnil; /* Figure out which root window we're on. */ XQueryPointer (x_current_display, DefaultRootWindow (x_current_display), /* The root window which contains the pointer. */ &root, /* Trash which we can't trust if the pointer is on a different screen. */ &dummy_window, /* The position on that root window. */ &root_x, &root_y, /* More trash we can't trust. */ &dummy, &dummy, /* Modifier keys and pointer buttons, about which we don't care. */ (unsigned int *) &dummy); /* Now we have a position on the root; find the innermost window containing the pointer. */ { Window win, child; int win_x, win_y; int parent_x, parent_y; win = root; for (;;) { XTranslateCoordinates (x_current_display, /* From-window, to-window. */ root, win, /* From-position, to-position. */ root_x, root_y, &win_x, &win_y, /* Child of win. */ &child); if (child == None) break; win = child; parent_x = win_x; parent_y = win_y; } /* Now we know that: win is the innermost window containing the pointer (XTC says it has no child containing the pointer), win_x and win_y are the pointer's position in it (XTC did this the last time through), and parent_x and parent_y are the pointer's position in win's parent. (They are what win_x and win_y were when win was child. If win is the root window, it has no parent, and parent_{x,y} are invalid, but that's okay, because we'll never use them in that case.) */ /* Is win one of our frames? */ *f = x_window_to_frame (win); /* If not, is it one of our scroll bars? */ if (! *f) { struct scroll_bar *bar = x_window_to_scroll_bar (win); if (bar) { *f = XFRAME (WINDOW_FRAME (XWINDOW (bar->window))); win_x = parent_x; win_y = parent_y; } } if (*f) { pixel_to_glyph_coords (*f, win_x, win_y, &win_x, &win_y, &last_mouse_glyph); *bar_window = Qnil; *part = 0; XSET (*x, Lisp_Int, win_x); XSET (*y, Lisp_Int, win_y); *time = last_mouse_movement_time; } } } UNBLOCK_INPUT; } #else /* ! defined (HAVE_X11) */ #define XEvent XKeyPressedEvent #endif /* ! defined (HAVE_X11) */ /* Scroll bar support. */ /* Given an X window ID, find the struct scroll_bar which manages it. This can be called in GC, so we have to make sure to strip off mark bits. */ static struct scroll_bar * x_window_to_scroll_bar (window_id) Window window_id; { Lisp_Object tail, frame; for (tail = Vframe_list; XGCTYPE (tail) == Lisp_Cons; tail = XCONS (tail)->cdr) { Lisp_Object frame = XCONS (tail)->car; Lisp_Object bar, condemned; /* All elements of Vframe_list should be frames. */ if (XGCTYPE (frame) != Lisp_Frame) abort (); /* Scan this frame's scroll bar list for a scroll bar with the right window ID. */ condemned = FRAME_CONDEMNED_SCROLL_BARS (XFRAME (frame)); for (bar = FRAME_SCROLL_BARS (XFRAME (frame)); /* This trick allows us to search both the ordinary and condemned scroll bar lists with one loop. */ ! GC_NILP (bar) || (bar = condemned, condemned = Qnil, ! GC_NILP (bar)); bar = XSCROLL_BAR(bar)->next) if (SCROLL_BAR_X_WINDOW (XSCROLL_BAR (bar)) == window_id) return XSCROLL_BAR (bar); } return 0; } /* Open a new X window to serve as a scroll bar, and return the scroll bar vector for it. */ static struct scroll_bar * x_scroll_bar_create (window, top, left, width, height) struct window *window; int top, left, width, height; { FRAME_PTR frame = XFRAME (WINDOW_FRAME (window)); struct scroll_bar *bar = XSCROLL_BAR (Fmake_vector (make_number (SCROLL_BAR_VEC_SIZE), Qnil)); BLOCK_INPUT; { XSetWindowAttributes a; unsigned long mask; a.background_pixel = frame->display.x->background_pixel; a.event_mask = (ButtonPressMask | ButtonReleaseMask | ButtonMotionMask | PointerMotionHintMask | ExposureMask); a.cursor = x_vertical_scroll_bar_cursor; mask = (CWBackPixel | CWEventMask | CWCursor); SET_SCROLL_BAR_X_WINDOW (bar, XCreateWindow (x_current_display, FRAME_X_WINDOW (frame), /* Position and size of scroll bar. */ left, top, width, height, /* Border width, depth, class, and visual. */ 0, CopyFromParent, CopyFromParent, CopyFromParent, /* Attributes. */ mask, &a)); } XSET (bar->window, Lisp_Window, window); XSET (bar->top, Lisp_Int, top); XSET (bar->left, Lisp_Int, left); XSET (bar->width, Lisp_Int, width); XSET (bar->height, Lisp_Int, height); XSET (bar->start, Lisp_Int, 0); XSET (bar->end, Lisp_Int, 0); bar->dragging = Qnil; /* Add bar to its frame's list of scroll bars. */ bar->next = FRAME_SCROLL_BARS (frame); bar->prev = Qnil; XSET (FRAME_SCROLL_BARS (frame), Lisp_Vector, bar); if (! NILP (bar->next)) XSET (XSCROLL_BAR (bar->next)->prev, Lisp_Vector, bar); XMapWindow (x_current_display, SCROLL_BAR_X_WINDOW (bar)); UNBLOCK_INPUT; return bar; } /* Draw BAR's handle in the proper position. If the handle is already drawn from START to END, don't bother redrawing it, unless REBUILD is non-zero; in that case, always redraw it. (REBUILD is handy for drawing the handle after expose events.) Normally, we want to constrain the start and end of the handle to fit inside its rectangle, but if the user is dragging the scroll bar handle, we want to let them drag it down all the way, so that the bar's top is as far down as it goes; otherwise, there's no way to move to the very end of the buffer. */ static void x_scroll_bar_set_handle (bar, start, end, rebuild) struct scroll_bar *bar; int start, end; int rebuild; { int dragging = ! NILP (bar->dragging); Window w = SCROLL_BAR_X_WINDOW (bar); GC gc = XFRAME (WINDOW_FRAME (XWINDOW (bar->window)))->display.x->normal_gc; /* If the display is already accurate, do nothing. */ if (! rebuild && start == XINT (bar->start) && end == XINT (bar->end)) return; BLOCK_INPUT; { int inside_width = VERTICAL_SCROLL_BAR_INSIDE_WIDTH (XINT (bar->width)); int inside_height = VERTICAL_SCROLL_BAR_INSIDE_HEIGHT (XINT (bar->height)); int top_range = VERTICAL_SCROLL_BAR_TOP_RANGE (XINT (bar->height)); /* Make sure the values are reasonable, and try to preserve the distance between start and end. */ { int length = end - start; if (start < 0) start = 0; else if (start > top_range) start = top_range; end = start + length; if (end < start) end = start; else if (end > top_range && ! dragging) end = top_range; } /* Store the adjusted setting in the scroll bar. */ XSET (bar->start, Lisp_Int, start); XSET (bar->end, Lisp_Int, end); /* Clip the end position, just for display. */ if (end > top_range) end = top_range; /* Draw bottom positions VERTICAL_SCROLL_BAR_MIN_HANDLE pixels below top positions, to make sure the handle is always at least that many pixels tall. */ end += VERTICAL_SCROLL_BAR_MIN_HANDLE; /* Draw the empty space above the handle. Note that we can't clear zero-height areas; that means "clear to end of window." */ if (0 < start) XClearArea (x_current_display, w, /* x, y, width, height, and exposures. */ VERTICAL_SCROLL_BAR_LEFT_BORDER, VERTICAL_SCROLL_BAR_TOP_BORDER, inside_width, start, False); /* Draw the handle itself. */ XFillRectangle (x_current_display, w, gc, /* x, y, width, height */ VERTICAL_SCROLL_BAR_LEFT_BORDER, VERTICAL_SCROLL_BAR_TOP_BORDER + start, inside_width, end - start); /* Draw the empty space below the handle. Note that we can't clear zero-height areas; that means "clear to end of window." */ if (end < inside_height) XClearArea (x_current_display, w, /* x, y, width, height, and exposures. */ VERTICAL_SCROLL_BAR_LEFT_BORDER, VERTICAL_SCROLL_BAR_TOP_BORDER + end, inside_width, inside_height - end, False); } UNBLOCK_INPUT; } /* Move a scroll bar around on the screen, to accomodate changing window configurations. */ static void x_scroll_bar_move (bar, top, left, width, height) struct scroll_bar *bar; int top, left, width, height; { BLOCK_INPUT; { XWindowChanges wc; unsigned int mask = 0; wc.x = left; wc.y = top; wc.width = width; wc.height = height; if (left != XINT (bar->left)) mask |= CWX; if (top != XINT (bar->top)) mask |= CWY; if (width != XINT (bar->width)) mask |= CWWidth; if (height != XINT (bar->height)) mask |= CWHeight; if (mask) XConfigureWindow (x_current_display, SCROLL_BAR_X_WINDOW (bar), mask, &wc); } XSET (bar->left, Lisp_Int, left); XSET (bar->top, Lisp_Int, top); XSET (bar->width, Lisp_Int, width); XSET (bar->height, Lisp_Int, height); UNBLOCK_INPUT; } /* Destroy the X window for BAR, and set its Emacs window's scroll bar to nil. */ static void x_scroll_bar_remove (bar) struct scroll_bar *bar; { FRAME_PTR f = XFRAME (WINDOW_FRAME (XWINDOW (bar->window))); BLOCK_INPUT; /* Destroy the window. */ XDestroyWindow (x_current_display, SCROLL_BAR_X_WINDOW (bar)); /* Disassociate this scroll bar from its window. */ XWINDOW (bar->window)->vertical_scroll_bar = Qnil; UNBLOCK_INPUT; } /* Set the handle of the vertical scroll bar for WINDOW to indicate that we are displaying PORTION characters out of a total of WHOLE characters, starting at POSITION. If WINDOW has no scroll bar, create one. */ static void XTset_vertical_scroll_bar (window, portion, whole, position) struct window *window; int portion, whole, position; { FRAME_PTR f = XFRAME (WINDOW_FRAME (window)); int top = XINT (window->top); int left = WINDOW_VERTICAL_SCROLL_BAR_COLUMN (window); int height = WINDOW_VERTICAL_SCROLL_BAR_HEIGHT (window); /* Where should this scroll bar be, pixelwise? */ int pixel_top = CHAR_TO_PIXEL_ROW (f, top); int pixel_left = CHAR_TO_PIXEL_COL (f, left); int pixel_width = VERTICAL_SCROLL_BAR_PIXEL_WIDTH (f); int pixel_height = VERTICAL_SCROLL_BAR_PIXEL_HEIGHT (f, height); struct scroll_bar *bar; /* Does the scroll bar exist yet? */ if (NILP (window->vertical_scroll_bar)) bar = x_scroll_bar_create (window, pixel_top, pixel_left, pixel_width, pixel_height); else { /* It may just need to be moved and resized. */ bar = XSCROLL_BAR (window->vertical_scroll_bar); x_scroll_bar_move (bar, pixel_top, pixel_left, pixel_width, pixel_height); } /* Set the scroll bar's current state, unless we're currently being dragged. */ if (NILP (bar->dragging)) { int top_range = VERTICAL_SCROLL_BAR_TOP_RANGE (pixel_height); if (whole == 0) x_scroll_bar_set_handle (bar, 0, top_range, 0); else { int start = (position * top_range) / whole; int end = ((position + portion) * top_range) / whole; x_scroll_bar_set_handle (bar, start, end, 0); } } XSET (window->vertical_scroll_bar, Lisp_Vector, bar); } /* The following three hooks are used when we're doing a thorough redisplay of the frame. We don't explicitly know which scroll bars are going to be deleted, because keeping track of when windows go away is a real pain - "Can you say set-window-configuration, boys and girls?" Instead, we just assert at the beginning of redisplay that *all* scroll bars are to be removed, and then save a scroll bar from the fiery pit when we actually redisplay its window. */ /* Arrange for all scroll bars on FRAME to be removed at the next call to `*judge_scroll_bars_hook'. A scroll bar may be spared if `*redeem_scroll_bar_hook' is applied to its window before the judgement. */ static void XTcondemn_scroll_bars (frame) FRAME_PTR frame; { /* The condemned list should be empty at this point; if it's not, then the rest of Emacs isn't using the condemn/redeem/judge protocol correctly. */ if (! NILP (FRAME_CONDEMNED_SCROLL_BARS (frame))) abort (); /* Move them all to the "condemned" list. */ FRAME_CONDEMNED_SCROLL_BARS (frame) = FRAME_SCROLL_BARS (frame); FRAME_SCROLL_BARS (frame) = Qnil; } /* Unmark WINDOW's scroll bar for deletion in this judgement cycle. Note that WINDOW isn't necessarily condemned at all. */ static void XTredeem_scroll_bar (window) struct window *window; { struct scroll_bar *bar; /* We can't redeem this window's scroll bar if it doesn't have one. */ if (NILP (window->vertical_scroll_bar)) abort (); bar = XSCROLL_BAR (window->vertical_scroll_bar); /* Unlink it from the condemned list. */ { FRAME_PTR f = XFRAME (WINDOW_FRAME (window)); if (NILP (bar->prev)) { /* If the prev pointer is nil, it must be the first in one of the lists. */ if (EQ (FRAME_SCROLL_BARS (f), window->vertical_scroll_bar)) /* It's not condemned. Everything's fine. */ return; else if (EQ (FRAME_CONDEMNED_SCROLL_BARS (f), window->vertical_scroll_bar)) FRAME_CONDEMNED_SCROLL_BARS (f) = bar->next; else /* If its prev pointer is nil, it must be at the front of one or the other! */ abort (); } else XSCROLL_BAR (bar->prev)->next = bar->next; if (! NILP (bar->next)) XSCROLL_BAR (bar->next)->prev = bar->prev; bar->next = FRAME_SCROLL_BARS (f); bar->prev = Qnil; XSET (FRAME_SCROLL_BARS (f), Lisp_Vector, bar); if (! NILP (bar->next)) XSET (XSCROLL_BAR (bar->next)->prev, Lisp_Vector, bar); } } /* Remove all scroll bars on FRAME that haven't been saved since the last call to `*condemn_scroll_bars_hook'. */ static void XTjudge_scroll_bars (f) FRAME_PTR f; { Lisp_Object bar, next; bar = FRAME_CONDEMNED_SCROLL_BARS (f); /* Clear out the condemned list now so we won't try to process any more events on the hapless scroll bars. */ FRAME_CONDEMNED_SCROLL_BARS (f) = Qnil; for (; ! NILP (bar); bar = next) { struct scroll_bar *b = XSCROLL_BAR (bar); x_scroll_bar_remove (b); next = b->next; b->next = b->prev = Qnil; } /* Now there should be no references to the condemned scroll bars, and they should get garbage-collected. */ } /* Handle an Expose or GraphicsExpose event on a scroll bar. This may be called from a signal handler, so we have to ignore GC mark bits. */ static void x_scroll_bar_expose (bar, event) struct scroll_bar *bar; XEvent *event; { Window w = SCROLL_BAR_X_WINDOW (bar); GC gc = XFRAME (WINDOW_FRAME (XWINDOW (bar->window)))->display.x->normal_gc; BLOCK_INPUT; x_scroll_bar_set_handle (bar, XINT (bar->start), XINT (bar->end), 1); /* Draw a one-pixel border just inside the edges of the scroll bar. */ XDrawRectangle (x_current_display, w, gc, /* x, y, width, height */ 0, 0, XINT (bar->width) - 1, XINT (bar->height) - 1); /* Draw another line to make the extra-thick border on the right. */ XFillRectangle (x_current_display, w, gc, /* x, y, width, height */ XINT (bar->width) - 2, 1, 1, XINT (bar->height) - 2); UNBLOCK_INPUT; } /* Handle a mouse click on the scroll bar BAR. If *EMACS_EVENT's kind is set to something other than no_event, it is enqueued. This may be called from a signal handler, so we have to ignore GC mark bits. */ static void x_scroll_bar_handle_click (bar, event, emacs_event) struct scroll_bar *bar; XEvent *event; struct input_event *emacs_event; { if (XGCTYPE (bar->window) != Lisp_Window) abort (); emacs_event->kind = scroll_bar_click; XSET (emacs_event->code, Lisp_Int, event->xbutton.button - Button1); emacs_event->modifiers = (x_convert_modifiers (event->xbutton.state) | (event->type == ButtonRelease ? up_modifier : down_modifier)); emacs_event->frame_or_window = bar->window; emacs_event->timestamp = event->xbutton.time; { int internal_height = VERTICAL_SCROLL_BAR_INSIDE_HEIGHT (XINT (bar->height)); int top_range = VERTICAL_SCROLL_BAR_TOP_RANGE (XINT (bar->height)); int y = event->xbutton.y - VERTICAL_SCROLL_BAR_TOP_BORDER; if (y < 0) y = 0; if (y > top_range) y = top_range; if (y < XINT (bar->start)) emacs_event->part = scroll_bar_above_handle; else if (y < XINT (bar->end) + VERTICAL_SCROLL_BAR_MIN_HANDLE) emacs_event->part = scroll_bar_handle; else emacs_event->part = scroll_bar_below_handle; /* If the user has just clicked on the handle, record where they're holding it. */ if (event->type == ButtonPress && emacs_event->part == scroll_bar_handle) XSET (bar->dragging, Lisp_Int, y - XINT (bar->start)); /* If the user has released the handle, set it to its final position. */ if (event->type == ButtonRelease && ! NILP (bar->dragging)) { int new_start = y - XINT (bar->dragging); int new_end = new_start + (XINT (bar->end) - XINT (bar->start)); x_scroll_bar_set_handle (bar, new_start, new_end, 0); bar->dragging = Qnil; } /* Clicks on the handle are always reported as occuring at the top of the handle. */ if (emacs_event->part == scroll_bar_handle) emacs_event->x = bar->start; else XSET (emacs_event->x, Lisp_Int, y); XSET (emacs_event->y, Lisp_Int, top_range); } } /* Handle some mouse motion while someone is dragging the scroll bar. This may be called from a signal handler, so we have to ignore GC mark bits. */ static void x_scroll_bar_note_movement (bar, event) struct scroll_bar *bar; XEvent *event; { last_mouse_movement_time = event->xmotion.time; mouse_moved = 1; XSET (last_mouse_scroll_bar, Lisp_Vector, bar); /* If we're dragging the bar, display it. */ if (! GC_NILP (bar->dragging)) { /* Where should the handle be now? */ int new_start = event->xmotion.y - XINT (bar->dragging); if (new_start != XINT (bar->start)) { int new_end = new_start + (XINT (bar->end) - XINT (bar->start)); x_scroll_bar_set_handle (bar, new_start, new_end, 0); } } /* Call XQueryPointer so we'll get an event the next time the mouse moves and we can see *still* on the same position. */ { int dummy; XQueryPointer (event->xmotion.display, event->xmotion.window, (Window *) &dummy, (Window *) &dummy, &dummy, &dummy, &dummy, &dummy, (unsigned int *) &dummy); } } /* Return information to the user about the current position of the mouse on the scroll bar. */ static void x_scroll_bar_report_motion (f, bar_window, part, x, y, time) FRAME_PTR *f; Lisp_Object *bar_window; enum scroll_bar_part *part; Lisp_Object *x, *y; unsigned long *time; { struct scroll_bar *bar = XSCROLL_BAR (last_mouse_scroll_bar); int win_x, win_y; BLOCK_INPUT; /* Get the mouse's position relative to the scroll bar window, and report that. */ { Window dummy_window; int dummy_coord; unsigned int dummy_mask; if (! XQueryPointer (x_current_display, SCROLL_BAR_X_WINDOW (bar), /* Root, child, root x and root y. */ &dummy_window, &dummy_window, &dummy_coord, &dummy_coord, /* Position relative to scroll bar. */ &win_x, &win_y, /* Mouse buttons and modifier keys. */ &dummy_mask)) { *f = 0; goto done; } } { int inside_height = VERTICAL_SCROLL_BAR_INSIDE_HEIGHT (XINT (bar->height)); int top_range = VERTICAL_SCROLL_BAR_TOP_RANGE (XINT (bar->height)); win_y -= VERTICAL_SCROLL_BAR_TOP_BORDER; if (! NILP (bar->dragging)) win_y -= XINT (bar->dragging); if (win_y < 0) win_y = 0; if (win_y > top_range) win_y = top_range; *f = XFRAME (WINDOW_FRAME (XWINDOW (bar->window))); *bar_window = bar->window; if (! NILP (bar->dragging)) *part = scroll_bar_handle; else if (win_y < XINT (bar->start)) *part = scroll_bar_above_handle; else if (win_y < XINT (bar->end) + VERTICAL_SCROLL_BAR_MIN_HANDLE) *part = scroll_bar_handle; else *part = scroll_bar_below_handle; XSET (*x, Lisp_Int, win_y); XSET (*y, Lisp_Int, top_range); *time = last_mouse_movement_time; } mouse_moved = 0; last_mouse_scroll_bar = Qnil; done: UNBLOCK_INPUT; } /* The screen has been cleared so we may have changed foreground or background colors, and the scroll bars may need to be redrawn. Clear out the scroll bars, and ask for expose events, so we can redraw them. */ x_scroll_bar_clear (f) FRAME_PTR f; { Lisp_Object bar; for (bar = FRAME_SCROLL_BARS (f); XTYPE (bar) == Lisp_Vector; bar = XSCROLL_BAR (bar)->next) XClearArea (x_current_display, SCROLL_BAR_X_WINDOW (XSCROLL_BAR (bar)), 0, 0, 0, 0, True); } /* The main X event-reading loop - XTread_socket. */ /* Timestamp of enter window event. This is only used by XTread_socket, but we have to put it out here, since static variables within functions sometimes don't work. */ static Time enter_timestamp; /* This holds the state XLookupString needs to implement dead keys and other tricks known as "compose processing". _X Window System_ says that a portable program can't use this, but Stephen Gildea assures me that letting the compiler initialize it to zeros will work okay. This must be defined outside of XTread_socket, for the same reasons given for enter_timestamp, above. */ static XComposeStatus compose_status; /* Communication with window managers. */ Atom Xatom_wm_protocols; /* Kinds of protocol things we may receive. */ Atom Xatom_wm_take_focus; Atom Xatom_wm_save_yourself; Atom Xatom_wm_delete_window; /* Other WM communication */ Atom Xatom_wm_configure_denied; /* When our config request is denied */ Atom Xatom_wm_window_moved; /* When the WM moves us. */ /* Window manager communication. */ Atom Xatom_wm_change_state; /* Record the last 100 characters stored to help debug the loss-of-chars-during-GC problem. */ int temp_index; short temp_buffer[100]; /* Read events coming from the X server. This routine is called by the SIGIO handler. We return as soon as there are no more events to be read. Events representing keys are stored in buffer BUFP, which can hold up to NUMCHARS characters. We return the number of characters stored into the buffer, thus pretending to be `read'. WAITP is nonzero if we should block until input arrives. EXPECTED is nonzero if the caller knows input is available. */ int XTread_socket (sd, bufp, numchars, waitp, expected) register int sd; register struct input_event *bufp; register int numchars; int waitp; int expected; { int count = 0; int nbytes = 0; int mask; int items_pending; /* How many items are in the X queue. */ XEvent event; struct frame *f; int event_found; int prefix; Lisp_Object part; if (interrupt_input_blocked) { interrupt_input_pending = 1; return -1; } interrupt_input_pending = 0; BLOCK_INPUT; if (numchars <= 0) abort (); /* Don't think this happens. */ #ifdef FIOSNBIO /* If available, Xlib uses FIOSNBIO to make the socket non-blocking, and then looks for EWOULDBLOCK. If O_NDELAY is set, FIOSNBIO is ignored, and instead of signalling EWOULDBLOCK, a read returns 0, which Xlib interprets as equivalent to EPIPE. */ fcntl (fileno (stdin), F_SETFL, 0); #endif /* ! defined (FIOSNBIO) */ #ifndef SIGIO #ifndef HAVE_SELECT if (! (fcntl (fileno (stdin), F_GETFL, 0) & O_NDELAY)) { extern int read_alarm_should_throw; read_alarm_should_throw = 1; XPeekEvent (XDISPLAY &event); read_alarm_should_throw = 0; } #endif /* HAVE_SELECT */ #endif /* SIGIO */ while (XStuffPending () != 0) { XNextEvent (XDISPLAY &event); event_found = 1; switch (event.type) { #ifdef HAVE_X11 case ClientMessage: { if (event.xclient.message_type == Xatom_wm_protocols && event.xclient.format == 32) { if (event.xclient.data.l[0] == Xatom_wm_take_focus) { f = x_window_to_frame (event.xclient.window); if (f) x_focus_on_frame (f); /* Not certain about handling scroll bars here */ } else if (event.xclient.data.l[0] == Xatom_wm_save_yourself) { /* Save state modify the WM_COMMAND property to something which can reinstate us. This notifies the session manager, who's looking for such a PropertyNotify. Can restart processing when a keyboard or mouse event arrives. */ if (numchars > 0) { } } else if (event.xclient.data.l[0] == Xatom_wm_delete_window) { struct frame *f = x_window_to_frame (event.xclient.window); if (f) if (numchars > 0) { } } } else if (event.xclient.message_type == Xatom_wm_configure_denied) { } else if (event.xclient.message_type == Xatom_wm_window_moved) { int new_x, new_y; new_x = event.xclient.data.s[0]; new_y = event.xclient.data.s[1]; } } break; #ifdef NEW_SELECTIONS case SelectionNotify: x_handle_selection_notify (&event); break; #endif case SelectionClear: /* Someone has grabbed ownership. */ #ifdef NEW_SELECTIONS { XSelectionClearEvent *eventp = (XSelectionClearEvent *) &event; if (numchars == 0) abort (); bufp->kind = selection_clear_event; SELECTION_EVENT_DISPLAY (bufp) = eventp->display; SELECTION_EVENT_SELECTION (bufp) = eventp->selection; SELECTION_EVENT_TIME (bufp) = eventp->time; bufp++; count += 1; numchars -= 1; } #else x_disown_selection (event.xselectionclear.window, event.xselectionclear.selection, event.xselectionclear.time); #endif break; case SelectionRequest: /* Someone wants our selection. */ #ifdef NEW_SELECTIONS { XSelectionRequestEvent *eventp = (XSelectionRequestEvent *) &event; if (numchars == 0) abort (); bufp->kind = selection_request_event; SELECTION_EVENT_DISPLAY (bufp) = eventp->display; SELECTION_EVENT_REQUESTOR (bufp) = eventp->requestor; SELECTION_EVENT_SELECTION (bufp) = eventp->selection; SELECTION_EVENT_TARGET (bufp) = eventp->target; SELECTION_EVENT_PROPERTY (bufp) = eventp->property; SELECTION_EVENT_TIME (bufp) = eventp->time; bufp++; count += 1; numchars -= 1; } #else x_answer_selection_request (event); #endif break; case PropertyNotify: #ifdef NEW_SELECTIONS x_handle_property_notify (&event); #else /* If we're being told about a root window property, then it's a cut buffer change. */ if (event.xproperty.window == ROOT_WINDOW) x_invalidate_cut_buffer_cache (&event.xproperty); /* Otherwise, we're probably handling an incremental selection transmission. */ else { /* If we were to do this synchronously, there'd be no worry about re-selecting. */ x_send_incremental (event); } #endif break; case Expose: f = x_window_to_frame (event.xexpose.window); if (f) { if (f->async_visible == 0) { f->async_visible = 1; f->async_iconified = 0; SET_FRAME_GARBAGED (f); } else { dumprectangle (x_window_to_frame (event.xexpose.window), event.xexpose.x, event.xexpose.y, event.xexpose.width, event.xexpose.height); } } else { struct scroll_bar *bar = x_window_to_scroll_bar (event.xexpose.window); if (bar) x_scroll_bar_expose (bar, &event); } break; case GraphicsExpose: /* This occurs when an XCopyArea's source area was obscured or not available.*/ f = x_window_to_frame (event.xgraphicsexpose.drawable); if (f) { dumprectangle (f, event.xgraphicsexpose.x, event.xgraphicsexpose.y, event.xgraphicsexpose.width, event.xgraphicsexpose.height); } break; case NoExpose: /* This occurs when an XCopyArea's source area was completely available */ break; #else /* ! defined (HAVE_X11) */ case ExposeWindow: if (event.subwindow != 0) break; /* duplicate event */ f = x_window_to_frame (event.window); if (event.window == f->display.x->icon_desc) { refreshicon (f); f->async_iconified = 1; } if (event.window == FRAME_X_WINDOW (f)) { /* Say must check all windows' needs_exposure flags. */ expose_all_windows = 1; f->display.x->needs_exposure = 1; f->async_visible = 1; } break; case ExposeRegion: if (event.subwindow != 0) break; /* duplicate event */ f = x_window_to_frame (event.window); if (event.window == f->display.x->icon_desc) { refreshicon (f); break; } /* If window already needs full redraw, ignore this rectangle. */ if (expose_all_windows && f->display.x->needs_exposure) break; /* Put the event on the queue of rectangles to redraw. */ if (enqueue_event (&event, &x_expose_queue)) /* If it is full, we can't record the rectangle, so redraw this entire window. */ { /* Say must check all windows' needs_exposure flags. */ expose_all_windows = 1; f->display.x->needs_exposure = 1; } break; case ExposeCopy: /* This should happen only when we are expecting it, in x_read_exposes. */ abort (); #endif /* ! defined (HAVE_X11) */ #ifdef HAVE_X11 case UnmapNotify: f = x_window_to_frame (event.xunmap.window); if (f) /* F may no longer exist if the frame was deleted. */ { /* While a frame is unmapped, display generation is disabled; you don't want to spend time updating a display that won't ever be seen. */ f->async_visible = 0; } break; case MapNotify: f = x_window_to_frame (event.xmap.window); if (f) { f->async_visible = 1; f->async_iconified = 0; /* wait_reading_process_input will notice this and update the frame's display structures. */ SET_FRAME_GARBAGED (f); } break; /* Turn off processing if we become fully obscured. */ case VisibilityNotify: break; #else /* ! defined (HAVE_X11) */ case UnmapWindow: f = x_window_to_frame (event.window); if (event.window == f->display.x->icon_desc) f->async_iconified = 0; if (event.window == FRAME_X_WINDOW (f)) f->async_visible = 0; break; #endif /* ! defined (HAVE_X11) */ #ifdef HAVE_X11 case KeyPress: f = x_window_to_frame (event.xkey.window); if (f != 0) { KeySym keysym; char copy_buffer[80]; int modifiers; event.xkey.state |= extra_keyboard_modifiers; modifiers = event.xkey.state; /* Some keyboards generate different characters depending on the state of the meta key, in an attempt to support non-English typists. It would be nice to keep this functionality somehow, but for now, we will just clear the meta-key flag to get the 'pure' character. */ event.xkey.state &= ~Mod1Mask; /* This will have to go some day... */ nbytes = XLookupString (&event.xkey, copy_buffer, 80, &keysym, &compose_status); /* Strip off the vendor-specific keysym bit, and take a shot at recognizing the codes. HP servers have extra keysyms that fit into the MiscFunctionKey category. */ keysym &= ~(1<<28); if (numchars > 1) { if ((keysym >= XK_BackSpace && keysym <= XK_Escape) || keysym == XK_Delete || IsCursorKey (keysym) /* 0xff50 <= x < 0xff60 */ || IsMiscFunctionKey (keysym) /* 0xff60 <= x < 0xff80 */ || IsKeypadKey (keysym) /* 0xff80 <= x < 0xffbe */ || IsFunctionKey (keysym)) /* 0xffbe <= x < 0xffe1 */ { if (temp_index == sizeof temp_buffer / sizeof (short)) temp_index = 0; temp_buffer[temp_index++] = keysym; bufp->kind = non_ascii_keystroke; XSET (bufp->code, Lisp_Int, (unsigned) keysym - 0xff00); XSET (bufp->frame_or_window, Lisp_Frame, f); bufp->modifiers = x_convert_modifiers (modifiers); bufp->timestamp = event.xkey.time; bufp++; count++; numchars--; } else if (numchars > nbytes) { register int i; for (i = 0; i < nbytes; i++) { if (temp_index == sizeof temp_buffer / sizeof (short)) temp_index = 0; temp_buffer[temp_index++] = copy_buffer[i]; bufp->kind = ascii_keystroke; XSET (bufp->code, Lisp_Int, copy_buffer[i]); XSET (bufp->frame_or_window, Lisp_Frame, f); bufp->modifiers = x_convert_modifiers (modifiers); bufp->timestamp = event.xkey.time; bufp++; } count += nbytes; numchars -= nbytes; } else abort (); } else abort (); } break; #else /* ! defined (HAVE_X11) */ case KeyPressed: { register char *where_mapping; f = x_window_to_frame (event.window); /* Ignore keys typed on icon windows. */ if (f != 0 && event.window == f->display.x->icon_desc) break; where_mapping = XLookupMapping (&event, &nbytes); /* Nasty fix for arrow keys */ if (!nbytes && IsCursorKey (event.detail & 0xff)) { switch (event.detail & 0xff) { case KC_CURSOR_LEFT: where_mapping = "\002"; break; case KC_CURSOR_RIGHT: where_mapping = "\006"; break; case KC_CURSOR_UP: where_mapping = "\020"; break; case KC_CURSOR_DOWN: where_mapping = "\016"; break; } nbytes = 1; } if (numchars - nbytes > 0) { register int i; for (i = 0; i < nbytes; i++) { bufp->kind = ascii_keystroke; XSET (bufp->code, Lisp_Int, where_mapping[i]); XSET (bufp->time, Lisp_Int, event.xkey.time); XSET (bufp->frame_or_window, Lisp_Frame, f); bufp++; } count += nbytes; numchars -= nbytes; } } break; #endif /* ! defined (HAVE_X11) */ #ifdef HAVE_X11 /* Here's a possible interpretation of the whole FocusIn-EnterNotify FocusOut-LeaveNotify mess. If you get a FocusIn event, you have to get a FocusOut event before you relinquish the focus. If you haven't received a FocusIn event, then a mere LeaveNotify is enough to free you. */ case EnterNotify: f = x_window_to_frame (event.xcrossing.window); if (event.xcrossing.focus) /* Entered Window */ { /* Avoid nasty pop/raise loops. */ if (f && (!(f->auto_raise) || !(f->auto_lower) || (event.xcrossing.time - enter_timestamp) > 500)) { x_new_focus_frame (f); enter_timestamp = event.xcrossing.time; } } else if (f == x_focus_frame) x_new_focus_frame (0); break; case FocusIn: f = x_window_to_frame (event.xfocus.window); if (event.xfocus.detail != NotifyPointer) x_focus_event_frame = f; if (f) x_new_focus_frame (f); break; case LeaveNotify: f = x_window_to_frame (event.xcrossing.window); if (event.xcrossing.focus) { if (! x_focus_event_frame) x_new_focus_frame (0); else x_new_focus_frame (f); } else { if (f == x_focus_event_frame) x_focus_event_frame = 0; if (f == x_focus_frame) x_new_focus_frame (0); } break; case FocusOut: f = x_window_to_frame (event.xfocus.window); if (event.xfocus.detail != NotifyPointer && f == x_focus_event_frame) x_focus_event_frame = 0; if (f && f == x_focus_frame) x_new_focus_frame (0); break; #else /* ! defined (HAVE_X11) */ case EnterWindow: if ((event.detail & 0xFF) == 1) break; /* Coming from our own subwindow */ if (event.subwindow != 0) break; /* Entering our own subwindow. */ { f = x_window_to_frame (event.window); x_mouse_frame = f; x_new_focus_frame (f); } break; case LeaveWindow: if ((event.detail & 0xFF) == 1) break; /* Entering our own subwindow */ if (event.subwindow != 0) break; /* Leaving our own subwindow. */ x_mouse_frame = 0; if (x_focus_frame == 0 && x_input_frame != 0 && x_input_frame == x_window_to_frame (event.window) && event.window == FRAME_X_WINDOW (x_input_frame)) { f = x_input_frame; x_input_frame = 0; if (f) frame_unhighlight (f); } break; #endif /* ! defined (HAVE_X11) */ #ifdef HAVE_X11 case MotionNotify: { f = x_window_to_frame (event.xmotion.window); if (f) note_mouse_movement (f, &event.xmotion); else { struct scroll_bar *bar = x_window_to_scroll_bar (event.xmotion.window); if (bar) x_scroll_bar_note_movement (bar, &event); } } break; case ConfigureNotify: f = x_window_to_frame (event.xconfigure.window); if (f) { int rows = PIXEL_TO_CHAR_HEIGHT (f, event.xconfigure.height); int columns = PIXEL_TO_CHAR_WIDTH (f, event.xconfigure.width); /* Even if the number of character rows and columns has not changed, the font size may have changed, so we need to check the pixel dimensions as well. */ if (columns != f->width || rows != f->height || event.xconfigure.width != f->display.x->pixel_width || event.xconfigure.height != f->display.x->pixel_height) { change_frame_size (f, rows, columns, 0, 1); SET_FRAME_GARBAGED (f); } f->display.x->pixel_width = event.xconfigure.width; f->display.x->pixel_height = event.xconfigure.height; f->display.x->left_pos = event.xconfigure.x; f->display.x->top_pos = event.xconfigure.y; } break; case ButtonPress: case ButtonRelease: { /* If we decide we want to generate an event to be seen by the rest of Emacs, we put it here. */ struct input_event emacs_event; emacs_event.kind = no_event; f = x_window_to_frame (event.xbutton.window); if (f) { if (!x_focus_frame || (f == x_focus_frame)) construct_mouse_click (&emacs_event, &event, f); } else { struct scroll_bar *bar = x_window_to_scroll_bar (event.xbutton.window); if (bar) x_scroll_bar_handle_click (bar, &event, &emacs_event); } if (numchars >= 1 && emacs_event.kind != no_event) { bcopy (&emacs_event, bufp, sizeof (struct input_event)); bufp++; count++; numchars--; } } break; #else /* ! defined (HAVE_X11) */ case ButtonPressed: case ButtonReleased: f = x_window_to_frame (event.window); if (f) { if (event.window == f->display.x->icon_desc) { x_make_frame_visible (f); if (warp_mouse_on_deiconify) XWarpMouse (FRAME_X_WINDOW (f), 10, 10); break; } if (event.window == FRAME_X_WINDOW (f)) { if (f->auto_raise) x_raise_frame (f); } } enqueue_event (&event, &x_mouse_queue); if (numchars >= 2) { bufp->kind = ascii_keystroke; bufp->code = (char) 'X' & 037; /* C-x */ XSET (bufp->frame_or_window, Lisp_Frame, f); XSET (bufp->time, Lisp_Int, event.xkey.time); bufp++; bufp->kind = ascii_keystroke; bufp->code = (char) 0; /* C-@ */ XSET (bufp->frame_or_window, Lisp_Frame, f); XSET (bufp->time, Lisp_Int, event.xkey.time); bufp++; count += 2; numchars -= 2; } break; #endif /* ! defined (HAVE_X11) */ #ifdef HAVE_X11 case CirculateNotify: break; case CirculateRequest: break; #endif /* ! defined (HAVE_X11) */ case MappingNotify: /* Someone has changed the keyboard mapping - update the local cache. */ switch (event.xmapping.request) { case MappingModifier: x_find_modifier_meanings (); /* This is meant to fall through. */ case MappingKeyboard: XRefreshKeyboardMapping (&event.xmapping); } break; default: break; } } #if 0 #ifdef HAVE_SELECT if (expected && ! event_found) { /* AOJ 880406: if select returns true but XPending doesn't, it means that there is an EOF condition; in other words, that X has died. Act as if there had been a hangup. */ int fd = ConnectionNumber (x_current_display); int mask = 1 << fd; if (0 != select (fd + 1, &mask, (long *) 0, (long *) 0, (EMACS_TIME) 0) && !XStuffPending ()) kill (getpid (), SIGHUP); } #endif /* ! defined (HAVE_SELECT) */ #endif /* ! 0 */ #ifndef HAVE_X11 if (updating_frame == 0) x_do_pending_expose (); #endif UNBLOCK_INPUT; return count; } #ifndef HAVE_X11 /* Read and process only Expose events until we get an ExposeCopy event; then return. This is used in insert/delete line. We assume input is already blocked. */ static void x_read_exposes () { struct frame *f; XKeyPressedEvent event; while (1) { /* while there are more events*/ XMaskEvent (ExposeWindow | ExposeRegion | ExposeCopy, &event); switch (event.type) { case ExposeWindow: if (event.subwindow != 0) break; /* duplicate event */ f = x_window_to_frame (event.window); if (event.window == f->display.x->icon_desc) { refreshicon (f); break; } if (event.window == FRAME_X_WINDOW (f)) { expose_all_windows = 1; f->display.x->needs_exposure = 1; break; } break; case ExposeRegion: if (event.subwindow != 0) break; /* duplicate event */ f = x_window_to_frame (event.window); if (event.window == f->display.x->icon_desc) { refreshicon (f); break; } /* If window already needs full redraw, ignore this rectangle. */ if (expose_all_windows && f->display.x->needs_exposure) break; /* Put the event on the queue of rectangles to redraw. */ if (enqueue_event (&event, &x_expose_queue)) /* If it is full, we can't record the rectangle, so redraw this entire window. */ { /* Say must check all windows' needs_exposure flags. */ expose_all_windows = 1; f->display.x->needs_exposure = 1; } break; case ExposeCopy: return; } } } #endif /* HAVE_X11 */ /* Drawing the cursor. */ /* Draw a hollow box cursor. Don't change the inside of the box. */ static void x_draw_box (f) struct frame *f; { int left = CHAR_TO_PIXEL_COL (f, f->cursor_x); int top = CHAR_TO_PIXEL_ROW (f, f->cursor_y); int width = FONT_WIDTH (f->display.x->font); int height = FONT_HEIGHT (f->display.x->font); #ifdef HAVE_X11 XDrawRectangle (x_current_display, FRAME_X_WINDOW (f), f->display.x->cursor_gc, left, top, width - 1, height - 1); #else /* ! defined (HAVE_X11) */ XPixSet (FRAME_X_WINDOW (f), left, top, width, 1, f->display.x->cursor_pixel); XPixSet (FRAME_X_WINDOW (f), left, top, 1, height, f->display.x->cursor_pixel); XPixSet (FRAME_X_WINDOW (f), left+width-1, top, 1, height, f->display.x->cursor_pixel); XPixSet (FRAME_X_WINDOW (f), left, top+height-1, width, 1, f->display.x->cursor_pixel); #endif /* ! defined (HAVE_X11) */ } /* Clear the cursor of frame F to background color, and mark the cursor as not shown. This is used when the text where the cursor is is about to be rewritten. */ static void clear_cursor (f) struct frame *f; { int mask; if (! FRAME_VISIBLE_P (f) || f->phys_cursor_x < 0) return; #ifdef HAVE_X11 x_display_cursor (f, 0); #else /* ! defined (HAVE_X11) */ XPixSet (FRAME_X_WINDOW (f), CHAR_TO_PIXEL_COL (f, f->phys_cursor_x), CHAR_TO_PIXEL_ROW (f, f->phys_cursor_y), FONT_WIDTH (f->display.x->font), FONT_HEIGHT (f->display.x->font), f->display.x->background_pixel); #endif /* ! defined (HAVE_X11) */ f->phys_cursor_x = -1; } /* Redraw the glyph at ROW, COLUMN on frame F, in the style HIGHLIGHT. HIGHLIGHT is as defined for dumpglyphs. Return the glyph drawn. */ static void x_draw_single_glyph (f, row, column, glyph, highlight) struct frame *f; int row, column; GLYPH glyph; int highlight; { dumpglyphs (f, CHAR_TO_PIXEL_COL (f, column), CHAR_TO_PIXEL_ROW (f, row), &glyph, 1, highlight, f->display.x->font); } static void x_display_bar_cursor (f, on) struct frame *f; int on; { struct frame_glyphs *current_glyphs = FRAME_CURRENT_GLYPHS (f); /* This is pointless on invisible frames, and dangerous on garbaged frames; in the latter case, the frame may be in the midst of changing its size, and curs_x and curs_y may be off the frame. */ if (! FRAME_VISIBLE_P (f) || FRAME_GARBAGED_P (f)) return; if (! on && f->phys_cursor_x < 0) return; /* If we're not updating, then we want to use the current frame's cursor position, not our local idea of where the cursor ought to be. */ if (f != updating_frame) { curs_x = FRAME_CURSOR_X (f); curs_y = FRAME_CURSOR_Y (f); } /* If there is anything wrong with the current cursor state, remove it. */ if (f->phys_cursor_x >= 0 && (!on || f->phys_cursor_x != curs_x || f->phys_cursor_y != curs_y || f->display.x->current_cursor != bar_cursor)) { /* Erase the cursor by redrawing the character underneath it. */ x_draw_single_glyph (f, f->phys_cursor_y, f->phys_cursor_x, f->phys_cursor_glyph, current_glyphs->highlight[f->phys_cursor_y]); f->phys_cursor_x = -1; } /* If we now need a cursor in the new place or in the new form, do it so. */ if (on && (f->phys_cursor_x < 0 || (f->display.x->current_cursor != bar_cursor))) { f->phys_cursor_glyph = ((current_glyphs->enable[curs_y] && curs_x < current_glyphs->used[curs_y]) ? current_glyphs->glyphs[curs_y][curs_x] : SPACEGLYPH); XFillRectangle (x_current_display, FRAME_X_WINDOW (f), f->display.x->cursor_gc, CHAR_TO_PIXEL_COL (f, curs_x), CHAR_TO_PIXEL_ROW (f, curs_y), 1, FONT_HEIGHT (f->display.x->font)); f->phys_cursor_x = curs_x; f->phys_cursor_y = curs_y; f->display.x->current_cursor = bar_cursor; } if (updating_frame != f) XFlushQueue (); } /* Turn the displayed cursor of frame F on or off according to ON. If ON is nonzero, where to put the cursor is specified by F->cursor_x and F->cursor_y. */ static void x_display_box_cursor (f, on) struct frame *f; int on; { struct frame_glyphs *current_glyphs = FRAME_CURRENT_GLYPHS (f); /* This is pointless on invisible frames, and dangerous on garbaged frames; in the latter case, the frame may be in the midst of changing its size, and curs_x and curs_y may be off the frame. */ if (! FRAME_VISIBLE_P (f) || FRAME_GARBAGED_P (f)) return; /* If cursor is off and we want it off, return quickly. */ if (!on && f->phys_cursor_x < 0) return; /* If we're not updating, then we want to use the current frame's cursor position, not our local idea of where the cursor ought to be. */ if (f != updating_frame) { curs_x = FRAME_CURSOR_X (f); curs_y = FRAME_CURSOR_Y (f); } /* If cursor is currently being shown and we don't want it to be or it is in the wrong place, or we want a hollow box and it's not so, (pout!) erase it. */ if (f->phys_cursor_x >= 0 && (!on || f->phys_cursor_x != curs_x || f->phys_cursor_y != curs_y || (f->display.x->current_cursor != hollow_box_cursor && (f != x_highlight_frame)))) { /* Erase the cursor by redrawing the character underneath it. */ x_draw_single_glyph (f, f->phys_cursor_y, f->phys_cursor_x, f->phys_cursor_glyph, current_glyphs->highlight[f->phys_cursor_y]); f->phys_cursor_x = -1; } /* If we want to show a cursor, or we want a box cursor and it's not so, write it in the right place. */ if (on && (f->phys_cursor_x < 0 || (f->display.x->current_cursor != filled_box_cursor && f == x_highlight_frame))) { f->phys_cursor_glyph = ((current_glyphs->enable[curs_y] && curs_x < current_glyphs->used[curs_y]) ? current_glyphs->glyphs[curs_y][curs_x] : SPACEGLYPH); if (f != x_highlight_frame) { x_draw_box (f); f->display.x->current_cursor = hollow_box_cursor; } else { x_draw_single_glyph (f, curs_y, curs_x, f->phys_cursor_glyph, 2); f->display.x->current_cursor = filled_box_cursor; } f->phys_cursor_x = curs_x; f->phys_cursor_y = curs_y; } if (updating_frame != f) XFlushQueue (); } x_display_cursor (f, on) struct frame *f; int on; { if (FRAME_DESIRED_CURSOR (f) == filled_box_cursor) x_display_box_cursor (f, on); else if (FRAME_DESIRED_CURSOR (f) == bar_cursor) x_display_bar_cursor (f, on); else /* Those are the only two we have implemented! */ abort (); } /* Icons. */ /* Refresh bitmap kitchen sink icon for frame F when we get an expose event for it. */ refreshicon (f) struct frame *f; { #ifdef HAVE_X11 /* Normally, the window manager handles this function. */ #else /* ! defined (HAVE_X11) */ int mask; if (f->display.x->icon_bitmap_flag) XBitmapBitsPut (f->display.x->icon_desc, 0, 0, sink_width, sink_height, sink_bits, BlackPixel, WHITE_PIX_DEFAULT, icon_bitmap, GXcopy, AllPlanes); else { extern struct frame *selected_frame; struct Lisp_String *str; unsigned char *string; string = XSTRING (XBUFFER (XWINDOW (f->selected_window)->buffer)->name)->data; if (f->display.x->icon_label != string) { f->display.x->icon_label = string; XChangeWindow (f->display.x->icon_desc, XQueryWidth (string, icon_font_info->id) + 10, icon_font_info->height + 10); } XText (f->display.x->icon_desc, 5, 5, string, str->size, icon_font_info->id, BLACK_PIX_DEFAULT, WHITE_PIX_DEFAULT); } XFlushQueue (); #endif /* ! defined (HAVE_X11) */ } /* Make the x-window of frame F use the gnu icon bitmap. */ int x_bitmap_icon (f) struct frame *f; { int mask; Window icon_window; if (FRAME_X_WINDOW (f) == 0) return 1; #ifdef HAVE_X11 if (icon_bitmap) XFreePixmap (x_current_display, icon_bitmap); icon_bitmap = XCreateBitmapFromData (x_current_display, FRAME_X_WINDOW (f), gnu_bits, gnu_width, gnu_height); x_wm_set_icon_pixmap (f, icon_bitmap); f->display.x->icon_bitmap_flag = 1; #else /* ! defined (HAVE_X11) */ if (f->display.x->icon_desc) { XClearIconWindow (FRAME_X_WINDOW (f)); XDestroyWindow (f->display.x->icon_desc); } icon_window = XCreateWindow (f->display.x->parent_desc, 0, 0, sink_width, sink_height, 2, WhitePixmap, (Pixmap) NULL); if (icon_window == 0) return 1; XSetIconWindow (FRAME_X_WINDOW (f), icon_window); XSelectInput (icon_window, ExposeWindow | UnmapWindow); f->display.x->icon_desc = icon_window; f->display.x->icon_bitmap_flag = 1; if (icon_bitmap == 0) icon_bitmap = XStoreBitmap (sink_mask_width, sink_mask_height, sink_mask_bits); #endif /* ! defined (HAVE_X11) */ return 0; } /* Make the x-window of frame F use a rectangle with text. */ int x_text_icon (f, icon_name) struct frame *f; char *icon_name; { #ifndef HAVE_X11 int mask; int width; Window icon_window; char *X_DefaultValue; Bitmap b1; #ifndef WhitePixel #define WhitePixel 1 #endif /* WhitePixel */ #ifndef BlackPixel #define BlackPixel 0 #endif /* BlackPixel */ #endif /* HAVE_X11 */ if (FRAME_X_WINDOW (f) == 0) return 1; #ifdef HAVE_X11 if (icon_name) f->display.x->icon_label = icon_name; else if (! f->display.x->icon_label) f->display.x->icon_label = " *emacs* "; XSetIconName (x_current_display, FRAME_X_WINDOW (f), (char *) f->display.x->icon_label); f->display.x->icon_bitmap_flag = 0; x_wm_set_icon_pixmap (f, 0); #else /* ! defined (HAVE_X11) */ if (icon_font_info == 0) icon_font_info = XGetFont (XGetDefault (XDISPLAY (char *) XSTRING (Vinvocation_name)->data, "BodyFont")); if (f->display.x->icon_desc) { XClearIconWindow (XDISPLAY FRAME_X_WINDOW (f)); XDestroyWindow (XDISPLAY f->display.x->icon_desc); } if (icon_name) f->display.x->icon_label = (unsigned char *) icon_name; else if (! f->display.x->icon_label) f->display.x->icon_label = XSTRING (f->name)->data; width = XStringWidth (f->display.x->icon_label, icon_font_info, 0, 0); icon_window = XCreateWindow (f->display.x->parent_desc, f->display.x->left_pos, f->display.x->top_pos, width + 10, icon_font_info->height + 10, 2, BlackPixmap, WhitePixmap); if (icon_window == 0) return 1; XSetIconWindow (FRAME_X_WINDOW (f), icon_window); XSelectInput (icon_window, ExposeWindow | ExposeRegion | UnmapWindow | ButtonPressed); f->display.x->icon_desc = icon_window; f->display.x->icon_bitmap_flag = 0; f->display.x->icon_label = 0; #endif /* ! defined (HAVE_X11) */ return 0; } /* Handling X errors. */ /* Shut down Emacs in an orderly fashion, because of a SIGPIPE on the X server's connection, or an error reported via the X protocol. */ static SIGTYPE x_connection_closed () { if (_Xdebug) abort (); shut_down_emacs (0); exit (70); } /* An X error handler which prints an error message and then kills Emacs. This is what's normally installed as Xlib's handler for protocol errors. */ static int x_error_quitter (display, error) Display *display; XErrorEvent *error; { char buf[256]; /* Note that there is no real way portable across R3/R4 to get the original error handler. */ XGetErrorText (display, error->error_code, buf, sizeof (buf)); fprintf (stderr, "X protocol error: %s on protocol request %d\n", buf, error->request_code); /* While we're testing Emacs 19, we'll just dump core whenever we get an X error, so we can figure out why it happened. */ abort (); x_connection_closed (); } /* A handler for X IO errors which prints an error message and then kills Emacs. This is what is always installed as Xlib's handler for I/O errors. */ static int x_io_error_quitter (display) Display *display; { fprintf (stderr, "Connection to X server %s lost.\n", XDisplayName (DisplayString (display))); /* While we're testing Emacs 19, we'll just dump core whenever we get an X error, so we can figure out why it happened. */ abort (); x_connection_closed (); } /* A buffer for storing X error messages. */ static char (*x_caught_error_message)[200]; /* An X error handler which stores the error message in x_caught_error_message. This is what's installed when x_catch_errors is in effect. */ static int x_error_catcher (display, error) Display *display; XErrorEvent *error; { XGetErrorText (display, error->error_code, *x_caught_error_message, sizeof (*x_caught_error_message)); } /* Begin trapping X errors. After calling this function, X protocol errors no longer cause Emacs to exit; instead, they are recorded in x_cfc_error_message. Calling x_check_errors signals an Emacs error if an X error has occurred since the last call to x_catch_errors or x_check_errors. Calling x_uncatch_errors resumes the normal error handling. */ void x_catch_errors(), x_check_errors (), x_uncatch_errors (); void x_catch_errors () { /* Make sure any errors from previous requests have been dealt with. */ XSync (x_current_display, False); /* Set up the error buffer. */ x_caught_error_message = (char (*)[]) xmalloc (sizeof (*x_caught_error_message)); (*x_caught_error_message)[0] = '\0'; /* Install our little error handler. */ XHandleError (x_error_catcher); } /* If any X protocol errors have arrived since the last call to x_catch_errors or x_check_errors, signal an Emacs error using sprintf (a buffer, FORMAT, the x error message text) as the text. */ void x_check_errors (format) char *format; { /* Make sure to catch any errors incurred so far. */ XSync (x_current_display, False); if ((*x_caught_error_message)[0]) { char buf[256]; sprintf (buf, format, *x_caught_error_message); xfree (x_caught_error_message); x_uncatch_errors (); error (buf); } } void x_uncatch_errors () { xfree (x_caught_error_message); XHandleError (x_error_quitter); } #if 0 static unsigned int x_wire_count; x_trace_wire () { fprintf (stderr, "Lib call: %d\n", ++x_wire_count); } #endif /* ! 0 */ /* Changing the font of the frame. */ /* Set the font of the x-window specified by frame F to the font named NEWNAME. This is safe to use even before F has an actual x-window. */ #ifdef HAVE_X11 /* A table of all the fonts we have already loaded. */ static XFontStruct **x_font_table; /* The current capacity of x_font_table. */ static int x_font_table_size; /* The number of fonts actually stored in x_font_table. x_font_table[n] is used and valid iff 0 <= n < n_fonts. 0 <= n_fonts <= x_font_table_size. */ static int n_fonts; x_new_font (f, fontname) struct frame *f; register char *fontname; { XFontStruct *temp; int already_loaded; int n_matching_fonts; XFontStruct *font_info; char **font_names; /* Get a list of all the fonts that match this name. Once we have a list of matching fonts, we compare them against the fonts we already have by comparing font ids. */ font_names = (char **) XListFontsWithInfo (x_current_display, fontname, 1024, &n_matching_fonts, &font_info); /* If the server couldn't find any fonts whose named matched fontname, return an error code. */ if (n_matching_fonts == 0) return 1; /* See if we've already loaded a matching font. */ { int i, j; already_loaded = 0; for (i = 0; i < n_fonts; i++) for (j = 0; j < n_matching_fonts; j++) if (x_font_table[i]->fid == font_info[j].fid) { already_loaded = i; goto found_font; } } found_font: /* If we have, just return it from the table. */ if (already_loaded) f->display.x->font = x_font_table[already_loaded]; /* Otherwise, load the font and add it to the table. */ else { XFontStruct *font; font = (XFontStruct *) XLoadQueryFont (x_current_display, fontname); if (! font) return 1; /* Do we need to create the table? */ if (x_font_table_size == 0) { x_font_table_size = 16; x_font_table = (XFontStruct **) xmalloc (x_font_table_size * sizeof (x_font_table[0])); } /* Do we need to grow the table? */ else if (n_fonts >= x_font_table_size) { x_font_table_size *= 2; x_font_table = (XFontStruct **) xrealloc (x_font_table, (x_font_table_size * sizeof (x_font_table[0]))); } f->display.x->font = x_font_table[n_fonts++] = font; } /* Free the information from XListFontsWithInfo. The data we actually retain comes from XLoadQueryFont. */ XFreeFontInfo (font_names, font_info, n_matching_fonts); /* Now make the frame display the given font. */ if (FRAME_X_WINDOW (f) != 0) { XSetFont (x_current_display, f->display.x->normal_gc, f->display.x->font->fid); XSetFont (x_current_display, f->display.x->reverse_gc, f->display.x->font->fid); XSetFont (x_current_display, f->display.x->cursor_gc, f->display.x->font->fid); x_set_window_size (f, f->width, f->height); } return 0; } #else /* ! defined (HAVE_X11) */ x_new_font (f, newname) struct frame *f; register char *newname; { FONT_TYPE *temp; int mask; temp = XGetFont (newname); if (temp == (FONT_TYPE *) 0) return 1; if (f->display.x->font) XLoseFont (f->display.x->font); f->display.x->font = temp; if (FRAME_X_WINDOW (f) != 0) x_set_window_size (f, f->width, f->height); return 0; } #endif /* ! defined (HAVE_X11) */ /* X Window sizes and positions. */ x_calc_absolute_position (f) struct frame *f; { #ifdef HAVE_X11 if (f->display.x->left_pos < 0) f->display.x->left_pos = x_screen_width - PIXEL_WIDTH (f) + f->display.x->left_pos; if (f->display.x->top_pos < 0) f->display.x->top_pos = x_screen_height - PIXEL_HEIGHT (f) + f->display.x->top_pos; #else /* ! defined (HAVE_X11) */ WINDOWINFO_TYPE parentinfo; XGetWindowInfo (FRAME_X_WINDOW (f), &parentinfo); if (f->display.x->left_pos < 0) f->display.x->left_pos = parentinfo.width + (f->display.x->left_pos + 1) - PIXEL_WIDTH (f) - 2 * f->display.x->internal_border_width; if (f->display.x->top_pos < 0) f->display.x->top_pos = parentinfo.height + (f->display.x->top_pos + 1) - PIXEL_HEIGHT (f) - 2 * f->display.x->internal_border_width; #endif /* ! defined (HAVE_X11) */ } x_set_offset (f, xoff, yoff) struct frame *f; register int xoff, yoff; { f->display.x->top_pos = yoff; f->display.x->left_pos = xoff; x_calc_absolute_position (f); BLOCK_INPUT; XMoveWindow (XDISPLAY FRAME_X_WINDOW (f), f->display.x->left_pos, f->display.x->top_pos); #ifdef HAVE_X11 x_wm_set_size_hint (f, 0); #endif /* ! defined (HAVE_X11) */ UNBLOCK_INPUT; } /* Call this to change the size of frame F's x-window. */ x_set_window_size (f, cols, rows) struct frame *f; int cols, rows; { int pixelwidth, pixelheight; int mask; BLOCK_INPUT; check_frame_size (f, &rows, &cols); f->display.x->vertical_scroll_bar_extra = (FRAME_HAS_VERTICAL_SCROLL_BARS (f) ? VERTICAL_SCROLL_BAR_PIXEL_WIDTH (f) : 0); pixelwidth = CHAR_TO_PIXEL_WIDTH (f, cols); pixelheight = CHAR_TO_PIXEL_HEIGHT (f, rows); #ifdef HAVE_X11 x_wm_set_size_hint (f, 0); #endif /* ! defined (HAVE_X11) */ XChangeWindowSize (FRAME_X_WINDOW (f), pixelwidth, pixelheight); /* Now, strictly speaking, we can't be sure that this is accurate, but the window manager will get around to dealing with the size change request eventually, and we'll hear how it went when the ConfigureNotify event gets here. We could just not bother storing any of this information here, and let the ConfigureNotify event set everything up, but that might be kind of confusing to the lisp code, since size changes wouldn't be reported in the frame parameters until some random point in the future when the ConfigureNotify event arrives. */ change_frame_size (f, rows, cols, 0, 0); PIXEL_WIDTH (f) = pixelwidth; PIXEL_HEIGHT (f) = pixelheight; /* We've set {FRAME,PIXEL}_{WIDTH,HEIGHT} to the values we hope to receive in the ConfigureNotify event; if we get what we asked for, then the event won't cause the screen to become garbaged, so we have to make sure to do it here. */ SET_FRAME_GARBAGED (f); XFlushQueue (); UNBLOCK_INPUT; } #ifndef HAVE_X11 x_set_resize_hint (f) struct frame *f; { XSetResizeHint (FRAME_X_WINDOW (f), 2 * f->display.x->internal_border_width, 2 * f->display.x->internal_border_width, FONT_WIDTH (f->display.x->font), FONT_HEIGHT (f->display.x->font)); } #endif /* HAVE_X11 */ /* Mouse warping, focus shifting, raising and lowering. */ x_set_mouse_position (f, x, y) struct frame *f; int x, y; { int pix_x, pix_y; x_raise_frame (f); pix_x = CHAR_TO_PIXEL_COL (f, x) + FONT_WIDTH (f->display.x->font) / 2; pix_y = CHAR_TO_PIXEL_ROW (f, y) + FONT_HEIGHT (f->display.x->font) / 2; if (pix_x < 0) pix_x = 0; if (pix_x > PIXEL_WIDTH (f)) pix_x = PIXEL_WIDTH (f); if (pix_y < 0) pix_y = 0; if (pix_y > PIXEL_HEIGHT (f)) pix_y = PIXEL_HEIGHT (f); BLOCK_INPUT; XWarpMousePointer (FRAME_X_WINDOW (f), pix_x, pix_y); UNBLOCK_INPUT; } #ifdef HAVE_X11 x_focus_on_frame (f) struct frame *f; { x_raise_frame (f); #if 0 /* I don't think that the ICCCM allows programs to do things like this without the interaction of the window manager. Whatever you end up doing with this code, do it to x_unfocus_frame too. */ XSetInputFocus (x_current_display, FRAME_X_WINDOW (f), RevertToPointerRoot, CurrentTime); #endif /* ! 0 */ } x_unfocus_frame (f) struct frame *f; { #if 0 /* Look at the remarks in x_focus_on_frame. */ if (x_focus_frame == f) XSetInputFocus (x_current_display, PointerRoot, RevertToPointerRoot, CurrentTime); #endif /* ! 0 */ } #endif /* ! defined (HAVE_X11) */ /* Raise frame F. */ x_raise_frame (f) struct frame *f; { if (f->async_visible) { BLOCK_INPUT; XRaiseWindow (XDISPLAY FRAME_X_WINDOW (f)); XFlushQueue (); UNBLOCK_INPUT; } } /* Lower frame F. */ x_lower_frame (f) struct frame *f; { if (f->async_visible) { BLOCK_INPUT; XLowerWindow (XDISPLAY FRAME_X_WINDOW (f)); XFlushQueue (); UNBLOCK_INPUT; } } static void XTframe_raise_lower (f, raise) FRAME_PTR f; int raise; { if (raise) x_raise_frame (f); else x_lower_frame (f); } /* Change from withdrawn state to mapped state. */ x_make_frame_visible (f) struct frame *f; { int mask; BLOCK_INPUT; if (! FRAME_VISIBLE_P (f)) { #ifdef HAVE_X11 if (! EQ (Vx_no_window_manager, Qt)) x_wm_set_window_state (f, NormalState); XMapWindow (XDISPLAY FRAME_X_WINDOW (f)); if (FRAME_HAS_VERTICAL_SCROLL_BARS (f)) XMapSubwindows (x_current_display, FRAME_X_WINDOW (f)); #else /* ! defined (HAVE_X11) */ XMapWindow (XDISPLAY FRAME_X_WINDOW (f)); if (f->display.x->icon_desc != 0) XUnmapWindow (f->display.x->icon_desc); /* Handled by the MapNotify event for X11 */ f->async_visible = 1; f->async_iconified = 0; /* NOTE: this may cause problems for the first frame. */ XTcursor_to (0, 0); #endif /* ! defined (HAVE_X11) */ } XFlushQueue (); UNBLOCK_INPUT; } /* Change from mapped state to withdrawn state. */ x_make_frame_invisible (f) struct frame *f; { int mask; if (! f->async_visible) return; BLOCK_INPUT; #ifdef HAVE_X11R4 if (! XWithdrawWindow (x_current_display, FRAME_X_WINDOW (f), DefaultScreen (x_current_display))) { UNBLOCK_INPUT_RESIGNAL; error ("can't notify window manager of window withdrawl"); } #else /* ! defined (HAVE_X11R4) */ #ifdef HAVE_X11 /* Tell the window manager what we're going to do. */ if (! EQ (Vx_no_window_manager, Qt)) { XEvent unmap; unmap.xunmap.type = UnmapNotify; unmap.xunmap.window = FRAME_X_WINDOW (f); unmap.xunmap.event = DefaultRootWindow (x_current_display); unmap.xunmap.from_configure = False; if (! XSendEvent (x_current_display, DefaultRootWindow (x_current_display), False, SubstructureRedirectMask|SubstructureNotifyMask, &unmap)) { UNBLOCK_INPUT_RESIGNAL; error ("can't notify window manager of withdrawal"); } } /* Unmap the window ourselves. Cheeky! */ XUnmapWindow (x_current_display, FRAME_X_WINDOW (f)); #else /* ! defined (HAVE_X11) */ XUnmapWindow (FRAME_X_WINDOW (f)); f->async_visible = 0; /* Handled by the UnMap event for X11 */ if (f->display.x->icon_desc != 0) XUnmapWindow (f->display.x->icon_desc); #endif /* ! defined (HAVE_X11) */ #endif /* ! defined (HAVE_X11R4) */ XFlushQueue (); UNBLOCK_INPUT; } /* Change window state from mapped to iconified. */ x_iconify_frame (f) struct frame *f; { int mask; if (f->async_iconified) return; BLOCK_INPUT; #ifdef HAVE_X11 /* Since we don't know which revision of X we're running, we'll use both the X11R3 and X11R4 techniques. I don't know if this is a good idea. */ /* X11R4: send a ClientMessage to the window manager using the WM_CHANGE_STATE type. */ { XEvent message; message.xclient.window = FRAME_X_WINDOW (f); message.xclient.type = ClientMessage; message.xclient.message_type = Xatom_wm_change_state; message.xclient.format = 32; message.xclient.data.l[0] = IconicState; if (! XSendEvent (x_current_display, DefaultRootWindow (x_current_display), False, SubstructureRedirectMask | SubstructureNotifyMask, &message)) { UNBLOCK_INPUT_RESIGNAL; error ("Can't notify window manager of iconification."); } } /* X11R3: set the initial_state field of the window manager hints to IconicState. */ x_wm_set_window_state (f, IconicState); f->async_iconified = 1; #else /* ! defined (HAVE_X11) */ XUnmapWindow (XDISPLAY FRAME_X_WINDOW (f)); f->async_visible = 0; /* Handled in the UnMap event for X11. */ if (f->display.x->icon_desc != 0) { XMapWindow (XDISPLAY f->display.x->icon_desc); refreshicon (f); } #endif /* ! defined (HAVE_X11) */ XFlushQueue (); UNBLOCK_INPUT; } /* Destroy the X window of frame F. */ x_destroy_window (f) struct frame *f; { BLOCK_INPUT; if (f->display.x->icon_desc != 0) XDestroyWindow (XDISPLAY f->display.x->icon_desc); XDestroyWindow (XDISPLAY f->display.x->window_desc); XFlushQueue (); xfree (f->display.x); f->display.x = 0; if (f == x_focus_frame) x_focus_frame = 0; if (f == x_highlight_frame) x_highlight_frame = 0; UNBLOCK_INPUT; } /* Manage event queues for X10. */ #ifndef HAVE_X11 /* Manage event queues. This code is only used by the X10 support. We cannot leave events in the X queue and get them when we are ready because X does not provide a subroutine to get only a certain kind of event but not block if there are no queued events of that kind. Therefore, we must examine events as they come in and copy events of certain kinds into our private queues. All ExposeRegion events are put in x_expose_queue. All ButtonPressed and ButtonReleased events are put in x_mouse_queue. */ /* Write the event *P_XREP into the event queue *QUEUE. If the queue is full, do nothing, but return nonzero. */ int enqueue_event (p_xrep, queue) register XEvent *p_xrep; register struct event_queue *queue; { int newindex = queue->windex + 1; if (newindex == EVENT_BUFFER_SIZE) newindex = 0; if (newindex == queue->rindex) return -1; queue->xrep[queue->windex] = *p_xrep; queue->windex = newindex; return 0; } /* Fetch the next event from queue *QUEUE and store it in *P_XREP. If *QUEUE is empty, do nothing and return 0. */ int dequeue_event (p_xrep, queue) register XEvent *p_xrep; register struct event_queue *queue; { if (queue->windex == queue->rindex) return 0; *p_xrep = queue->xrep[queue->rindex++]; if (queue->rindex == EVENT_BUFFER_SIZE) queue->rindex = 0; return 1; } /* Return the number of events buffered in *QUEUE. */ int queue_event_count (queue) register struct event_queue *queue; { int tem = queue->windex - queue->rindex; if (tem >= 0) return tem; return EVENT_BUFFER_SIZE + tem; } /* Return nonzero if mouse input is pending. */ int mouse_event_pending_p () { return queue_event_count (&x_mouse_queue); } #endif /* HAVE_X11 */ /* Setting window manager hints. */ #ifdef HAVE_X11 x_wm_set_size_hint (f, prompting) struct frame *f; long prompting; { XSizeHints size_hints; Window window = FRAME_X_WINDOW (f); size_hints.flags = PResizeInc | PMinSize | PMaxSize; flexlines = f->height; size_hints.x = f->display.x->left_pos; size_hints.y = f->display.x->top_pos; size_hints.height = PIXEL_HEIGHT (f); size_hints.width = PIXEL_WIDTH (f); size_hints.width_inc = FONT_WIDTH (f->display.x->font); size_hints.height_inc = FONT_HEIGHT (f->display.x->font); size_hints.max_width = x_screen_width - CHAR_TO_PIXEL_WIDTH (f, 0); size_hints.max_height = x_screen_height - CHAR_TO_PIXEL_HEIGHT (f, 0); { int base_width, base_height; base_width = CHAR_TO_PIXEL_WIDTH (f, 0); base_height = CHAR_TO_PIXEL_HEIGHT (f, 0); { int min_rows = 0, min_cols = 0; check_frame_size (f, &min_rows, &min_cols); /* The window manager uses the base width hints to calculate the current number of rows and columns in the frame while resizing; min_width and min_height aren't useful for this purpose, since they might not give the dimensions for a zero-row, zero-column frame. We use the base_width and base_height members if we have them; otherwise, we set the min_width and min_height members to the size for a zero x zero frame. */ #ifdef HAVE_X11R4 size_hints.flags |= PBaseSize; size_hints.base_width = base_width; size_hints.base_height = base_height; size_hints.min_width = base_width + min_cols * size_hints.width_inc; size_hints.min_height = base_height + min_rows * size_hints.height_inc; #else size_hints.min_width = base_width; size_hints.min_height = base_height; #endif } } if (prompting) size_hints.flags |= prompting; else { XSizeHints hints; /* Sometimes I hate X Windows... */ XGetNormalHints (x_current_display, window, &hints); if (hints.flags & PSize) size_hints.flags |= PSize; if (hints.flags & PPosition) size_hints.flags |= PPosition; if (hints.flags & USPosition) size_hints.flags |= USPosition; if (hints.flags & USSize) size_hints.flags |= USSize; } #ifdef HAVE_X11R4 XSetWMNormalHints (x_current_display, window, &size_hints); #else XSetNormalHints (x_current_display, window, &size_hints); #endif } /* Used for IconicState or NormalState */ x_wm_set_window_state (f, state) struct frame *f; int state; { Window window = FRAME_X_WINDOW (f); f->display.x->wm_hints.flags |= StateHint; f->display.x->wm_hints.initial_state = state; XSetWMHints (x_current_display, window, &f->display.x->wm_hints); } x_wm_set_icon_pixmap (f, icon_pixmap) struct frame *f; Pixmap icon_pixmap; { Window window = FRAME_X_WINDOW (f); if (icon_pixmap) { f->display.x->wm_hints.icon_pixmap = icon_pixmap; f->display.x->wm_hints.flags |= IconPixmapHint; } else f->display.x->wm_hints.flags &= ~IconPixmapHint; XSetWMHints (x_current_display, window, &f->display.x->wm_hints); } x_wm_set_icon_position (f, icon_x, icon_y) struct frame *f; int icon_x, icon_y; { Window window = FRAME_X_WINDOW (f); f->display.x->wm_hints.flags |= IconPositionHint; f->display.x->wm_hints.icon_x = icon_x; f->display.x->wm_hints.icon_y = icon_y; XSetWMHints (x_current_display, window, &f->display.x->wm_hints); } /* Initialization. */ void x_term_init (display_name) char *display_name; { Lisp_Object frame; char *defaultvalue; #ifdef F_SETOWN extern int old_fcntl_owner; #endif /* ! defined (F_SETOWN) */ x_focus_frame = x_highlight_frame = 0; x_current_display = XOpenDisplay (display_name); if (x_current_display == 0) fatal ("X server %s not responding; check the DISPLAY environment variable or use \"-d\"\n", display_name); #ifdef HAVE_X11 { int hostname_size = 256; hostname = (char *) xmalloc (hostname_size); #if 0 XSetAfterFunction (x_current_display, x_trace_wire); #endif /* ! 0 */ /* Try to get the host name; if the buffer is too short, try again. Apparently, the only indication gethostname gives of whether the buffer was large enough is the presence or absence of a '\0' in the string. Eech. */ for (;;) { gethostname (hostname, hostname_size - 1); hostname[hostname_size - 1] = '\0'; /* Was the buffer large enough for gethostname to store the '\0'? */ if (strlen (hostname) < hostname_size - 1) break; hostname_size <<= 1; hostname = (char *) xrealloc (hostname, hostname_size); } x_id_name = (char *) xmalloc (XSTRING (Vinvocation_name)->size + strlen (hostname) + 2); sprintf (x_id_name, "%s@%s", XSTRING (Vinvocation_name)->data, hostname); } /* Figure out which modifier bits mean what. */ x_find_modifier_meanings (); /* Get the scroll bar cursor. */ x_vertical_scroll_bar_cursor = XCreateFontCursor (x_current_display, XC_sb_v_double_arrow); #if 0 /* Watch for PropertyNotify events on the root window; we use them to figure out when to invalidate our cache of the cut buffers. */ x_watch_cut_buffer_cache (); #endif if (ConnectionNumber (x_current_display) != 0) { dup2 (ConnectionNumber (x_current_display), 0); #ifndef SYSV_STREAMS /* Streams somehow keeps track of which descriptor number is being used to talk to X. So it is not safe to substitute descriptor 0. But it is safe to make descriptor 0 a copy of it. */ close (ConnectionNumber (x_current_display)); ConnectionNumber (x_current_display) = 0; /* Looks a little strange? * check the def of the macro; * it is a genuine lvalue */ #endif /* SYSV_STREAMS */ } #endif /* ! defined (HAVE_X11) */ #ifdef F_SETOWN old_fcntl_owner = fcntl (0, F_GETOWN, 0); #ifdef F_SETOWN_SOCK_NEG fcntl (0, F_SETOWN, -getpid ()); /* stdin is a socket here */ #else /* ! defined (F_SETOWN_SOCK_NEG) */ fcntl (0, F_SETOWN, getpid ()); #endif /* ! defined (F_SETOWN_SOCK_NEG) */ #endif /* ! defined (F_SETOWN) */ #ifdef SIGIO init_sigio (); #endif /* ! defined (SIGIO) */ /* Must use interrupt input because we cannot otherwise arrange for C-g to be noticed immediately. We cannot connect it to SIGINT. */ Fset_input_mode (Qt, Qnil, Qt, Qnil); expose_all_windows = 0; clear_frame_hook = XTclear_frame; clear_end_of_line_hook = XTclear_end_of_line; ins_del_lines_hook = XTins_del_lines; change_line_highlight_hook = XTchange_line_highlight; insert_glyphs_hook = XTinsert_glyphs; write_glyphs_hook = XTwrite_glyphs; delete_glyphs_hook = XTdelete_glyphs; ring_bell_hook = XTring_bell; reset_terminal_modes_hook = XTreset_terminal_modes; set_terminal_modes_hook = XTset_terminal_modes; update_begin_hook = XTupdate_begin; update_end_hook = XTupdate_end; set_terminal_window_hook = XTset_terminal_window; read_socket_hook = XTread_socket; cursor_to_hook = XTcursor_to; reassert_line_highlight_hook = XTreassert_line_highlight; mouse_position_hook = XTmouse_position; frame_rehighlight_hook = XTframe_rehighlight; frame_raise_lower_hook = XTframe_raise_lower; set_vertical_scroll_bar_hook = XTset_vertical_scroll_bar; condemn_scroll_bars_hook = XTcondemn_scroll_bars; redeem_scroll_bar_hook = XTredeem_scroll_bar; judge_scroll_bars_hook = XTjudge_scroll_bars; scroll_region_ok = 1; /* we'll scroll partial frames */ char_ins_del_ok = 0; /* just as fast to write the line */ line_ins_del_ok = 1; /* we'll just blt 'em */ fast_clear_end_of_line = 1; /* X does this well */ memory_below_frame = 0; /* we don't remember what scrolls off the bottom */ baud_rate = 19200; /* Note that there is no real way portable across R3/R4 to get the original error handler. */ XHandleError (x_error_quitter); XHandleIOError (x_io_error_quitter); /* Disable Window Change signals; they are handled by X events. */ #ifdef SIGWINCH signal (SIGWINCH, SIG_DFL); #endif /* ! defined (SIGWINCH) */ signal (SIGPIPE, x_connection_closed); } void syms_of_xterm () { staticpro (&last_mouse_scroll_bar); } #endif /* ! defined (HAVE_X11) */ #endif /* ! defined (HAVE_X_WINDOWS) */