This is gnosis.info, produced by .texi2any-real version 7.1 from gnosis.texi. INFO-DIR-SECTION Emacs misc features START-INFO-DIR-ENTRY * Gnosis (γνῶσις): (gnosis). Spaced Repetition System For Note Taking & Self-Testing. END-INFO-DIR-ENTRY  File: gnosis.info, Node: Top, Next: Introduction, Up: (dir) Gnosis User Manual ****************** Gnosis (γνῶσις), pronounced "noh-sis", _meaning knowledge in Greek_, is a spaced repetition system implementation for note taking and self testing. The objective of gnosis is to maximize memory retention by implementing reviewing of information at increasing intervals. The intervals grow longer as you become more familiar with the information, which reinforces long-term retention and reduces the risk of forgetting This manual is written for Gnosis version 0.3.0, released on 2024-06-28. • Official manual: • Git repositories: • * Menu: * Introduction:: * Adding notes:: * Note Types:: * Customization:: * Gnosis Algorithm:: * Editing notes:: * Sync between devices:: * Extending Gnosis:: -- The Detailed Node Listing -- Note Types * Cloze:: * MC-Cloze:: * MCQ (Multiple Choice Question):: * Basic Type:: * Double:: * y-or-n:: Customization * Image size:: * Typos | String Comparison:: Gnosis Algorithm * Initial Interval:: * Easiness Factor:: * Forgetting Factor:: Extending Gnosis * Creating Custom Note Types::  File: gnosis.info, Node: Introduction, Next: Adding notes, Prev: Top, Up: Top 1 Introduction ************** Before reading this manual, it's recommended you first try out ‘gnosis-demo’ Gnosis, is a spaced repetition system for note taking & self testing, where notes are taken in a Question/Answer/Explanation format & reviewed in spaced intervals, determined by the success or failure to recall a given answer. Gnosis implements a highly customizable algorithm, inspired by SM-2. Gnosis algorithm does not use user's subjective rating of a note to determine the next review interval, but instead uses the user's success or failure in recalling the answer of a note. Read more on *note Gnosis Algorithm::  File: gnosis.info, Node: Adding notes, Next: Note Types, Prev: Introduction, Up: Top 2 Adding notes ************** Creating notes for gnosis can be done interactively with: ‘M-x gnosis-add-note’ When it comes to adding images, you can select images that are inside ‘gnosis-images-dir’. For adjusting image size, refer to *note Customization::  File: gnosis.info, Node: Note Types, Next: Customization, Prev: Adding notes, Up: Top 3 Note Types ************ * Menu: * Cloze:: * MC-Cloze:: * MCQ (Multiple Choice Question):: * Basic Type:: * Double:: * y-or-n::  File: gnosis.info, Node: Cloze, Next: MC-Cloze, Up: Note Types 3.1 Cloze ========= A cloze note type is a format where you create sentences or paragraphs with "missing" words. A fill-in-the-blanks question. You can create a cloze note type using ‘M-x gnosis-add-note’ and selecting ‘Cloze’, the question should be formatted like this: {c1:Cyproheptadine} is a(n) {c2:5-HT2} receptor antagonist used to treat {c2:serotonin syndrome} You can also format clozes like Anki if you prefer; e.g ‘{{c1::Cyproheptadine}}’ • For each 'cX'-tag there will be created a cloze type note, the above example creates 2 cloze type notes. • Each 'cX' tag can have multiple clozes, but each cloze must be a *UNIQUE* word (or a unique combination of words) in given note. You can remove the _guidance_ string by adjusting ‘gnosis-cloze-guidance’.  File: gnosis.info, Node: MC-Cloze, Next: MCQ (Multiple Choice Question), Prev: Cloze, Up: Note Types 3.2 MC-Cloze ============ A MC-Cloze (_Multiple Choice Cloze_) is a fill-in-the-blank note, but unlike *note cloze note type: Cloze. the user is prompted to select an option instead of typing an answer. You can create multiple notes from one input, but each note can only have *one* cloze. The first option will always be the right answer (will be randomized in the database), separated by the rest of the answer by ‘gnosis-mc-cloze-separator’ (default value is "&&"), and a note will be generated from each cloze. Example: The greatest text editor is Emacs&&Vim&&Helix When customizing ‘gnosis-mc-cloze=separator’ pay attention to not use values that would mess up with regex functions.  File: gnosis.info, Node: MCQ (Multiple Choice Question), Next: Basic Type, Prev: MC-Cloze, Up: Note Types 3.3 MCQ (Multiple Choice Question) ================================== A MCQ note type, as the name suggests, is a multiple choice question. The stem field (question) is separated by the options (choices) via ‘gnosis-mcq-separator’, each option is separated by ‘gnosis-mcq-option-separator’. You can remove the _guidance_ string by adjusting ‘gnosis-mcq-guidance’.  File: gnosis.info, Node: Basic Type, Next: Double, Prev: MCQ (Multiple Choice Question), Up: Note Types 3.4 Basic Type ============== Basic note type is a simple question/answer note, where the user first sees a "main" part, which is usually a question, and he is prompted to input the answer.  File: gnosis.info, Node: Double, Next: y-or-n, Prev: Basic Type, Up: Note Types 3.5 Double ========== Double note type, is essentially a note that generates 2 basic notes. The second one reverses question/answer. Ideal for vocabulary acquisition notes.  File: gnosis.info, Node: y-or-n, Prev: Double, Up: Note Types 3.6 y-or-n ========== y-or-n (yes or no) note type, user is presented with a question and prompted to enter character "y" or "n". When using the hidden function ‘gnosis-add-note--y-or-n’, note that the ANSWER must be either 121 (‘y’) or 110 (‘n’), as those correspond to the character values used to represent them.  File: gnosis.info, Node: Customization, Next: Gnosis Algorithm, Prev: Note Types, Up: Top 4 Customization *************** * Menu: * Image size:: * Typos | String Comparison::  File: gnosis.info, Node: Image size, Next: Typos | String Comparison, Up: Customization 4.1 Image size ============== Adjust image size using ‘gnosis-image-height’ & ‘gnosis-image-width’ Example: (setf gnosis-image-height 300 gnosis-image-width 300)  File: gnosis.info, Node: Typos | String Comparison, Prev: Image size, Up: Customization 4.2 Typos | String Comparison ============================= You can adjust ‘gnosis-string-difference’, this is a threshold value for string comparison that determines the maximum acceptable Levenshtein distance between two strings, which identifies their similarity Let's illustrate with an example: (setf gnosis-string-difference 1) In this scenario, we set ‘gnosis-string-difference’ to 1. This implies that two strings will be recognized as similar if they exhibit a difference of at most one character edit. To demonstrate, 'example' and 'examples' will be recognized as similar, considering that the latter involves just one additional character."  File: gnosis.info, Node: Gnosis Algorithm, Next: Editing notes, Prev: Customization, Up: Top 5 Gnosis Algorithm ****************** Each gnosis note has an ef (easiness factor), which is a list of 3 values. The last value is the total ef for a note, which will be used to determine the next interval upon a successful answer recall, the second value is the ef-decrease value, this value will be subtracted from the the total ef upon failure to recall the answer of a note, the first value is the ef increase, will be added to the total ef upon a successful recall. Each gnosis deck has ‘gnosis-algorithm-ef-threshold’, it's an integer value that refers to the consecutive success or failures to recall an answer. Upon reaching the threshold, gnosis-algorithm-ef-decrease or gnosis-algorithm-ef-increase will be applied to the ef-increase or ef-decrease of note. You can customize deck specific algorithm values using ‘gnosis-dashboard’. * Menu: * Initial Interval:: * Easiness Factor:: * Forgetting Factor::  File: gnosis.info, Node: Initial Interval, Next: Easiness Factor, Up: Gnosis Algorithm 5.1 Initial Interval ==================== The default initial interval is defined at ‘gnosis-algorithm-interval’, you can define a custom initial interval for each deck as well. ‘gnosis-algorithm-interval’ is a list of 2 numbers, representing the first two initial intervals for successful reviews. Example: (setq gnosis-algorithm-interval '(0 1)) Using the above example, after first successfully reviewing a note, you will see it again in the next review session, if you successfully review said note again, the next review will be tomorrow. Upon failing to review a note without completing 2 successful reviews, you will have to review it again on the same day.  File: gnosis.info, Node: Easiness Factor, Next: Forgetting Factor, Prev: Initial Interval, Up: Gnosis Algorithm 5.2 Easiness Factor =================== The ‘gnosis-algorithm-ef’ is a list that consists of three items: 1. Easiness factor increase value: Added to the easiness factor upon a successful review. 2. Easiness factor decrease value: Subtracted from the total easiness factor upon a failed review. 3. Total Easiness factor: Used to calculate the next interval. How this is used: Multiplies the last interval by the easiness factor after a successful review. For example, upon a successful review, if the last review was 6 days ago with an easiness factor of 2.0, the next interval would be calculated as 6 * 2.0, and the next total easiness factor would be updated by adding the increase value 2.0 + . Configuration example: (setq gnosis-algorithm-ef '(0.30 0.25 1.3))  File: gnosis.info, Node: Forgetting Factor, Prev: Easiness Factor, Up: Gnosis Algorithm 5.3 Forgetting Factor ===================== ‘gnosis-algorithm-ff’ is a floating number below 1. Used to determine the next interval after an unsuccessful review. Multiplied with the last interval to calculate the next interval. For example, if ‘gnosis-algorithm-ff’ is set to 0.5 and the last interval was 6 days, the next interval will be 6 * 0.5 = 3 days. Example configuration: (setq gnosis-algorithm-ff 0.5) You can set a custom ‘gnosis-algorithm-ff’ for each deck as well.  File: gnosis.info, Node: Editing notes, Next: Sync between devices, Prev: Gnosis Algorithm, Up: Top 6 Editing notes *************** • Currently there are 2 ways for editing notes: • You can edit a note after review by pressing ‘e’ • Open ‘gnosis-dashboard’ with ‘M-x gnosis-dashboard’, find the note you want to edit and press ‘e’  File: gnosis.info, Node: Sync between devices, Next: Extending Gnosis, Prev: Editing notes, Up: Top 7 Sync between devices ********************** Gnosis uses git to maintain data integrity and facilitate synchronization across devices. You will need to configure your remote manually. Example: cd ~/.emacs.d/gnosis # default location for gnosis git init # After completing your first review session, a git repo should have been initialized automatically. git remote add origin git push --set-upstream origin master You can interactively use ‘gnosis-vc-push’ & ‘gnosis-vc-pull’. As the name suggests, they rely on ‘vc’ to work properly. Depending on your setup, ‘vc’ might require an external package for the ssh passphrase dialog, such as ‘x11-ssh-askpass’. To automatically push changes after a review session, add this to your configuration: (setf gnosis-vc-auto-push t) (gnosis-vc-pull) ;; Run vc-pull for gnosis on startup  File: gnosis.info, Node: Extending Gnosis, Prev: Sync between devices, Up: Top 8 Extending Gnosis ****************** To make development and customization easier, gnosis comes with ‘gnosis-test’ module, that should be used to create a custom database for testing. To exit the testing environment, rerun ‘M-x gnosis-test-start’ and then enter ‘n’ (no) at the prompt "Start development env?" * Menu: * Creating Custom Note Types::  File: gnosis.info, Node: Creating Custom Note Types, Up: Extending Gnosis 8.1 Creating Custom Note Types ============================== Creating custom note types for gnosis is a fairly simple thing to do • First add your NEW-TYPE to ‘gnosis-note-types’ (add-to-list 'gnosis-note-types "new-note-type") • Create 2 functions; ‘gnosis-add-note-TYPE’ & ‘gnosis-add-note--TYPE’ Each note type has a ‘gnosis-add-note-TYPE’ that is used interactively & a "hidden function" ‘gnosis-add-note--TYPE’ that handles all the logic. Refer to ‘gnosis-add-note-basic’ & ‘gnosis-add-note--basic’ for a simple example of how this is done. • Create ‘gnosis-review-TYPE’ This function should handle the review process, displaying it's contents and updating the database depending on the result of the review (fail/pass). Refer to ‘gnosis-review-basic’ for an example of how this should be done. • Optionally, you might want to create your own custom ‘gnosis-display’ functions  Tag Table: Node: Top250 Node: Introduction1503 Node: Adding notes2230 Node: Note Types2599 Node: Cloze2824 Node: MC-Cloze3720 Node: MCQ (Multiple Choice Question)4544 Node: Basic Type5043 Node: Double5346 Node: y-or-n5612 Node: Customization6014 Node: Image size6199 Node: Typos | String Comparison6485 Node: Gnosis Algorithm7260 Node: Initial Interval8296 Node: Easiness Factor9086 Node: Forgetting Factor10034 Node: Editing notes10642 Node: Sync between devices11034 Node: Extending Gnosis12055 Node: Creating Custom Note Types12510  End Tag Table  Local Variables: coding: utf-8 End: