This is gnosis.info, produced by makeinfo version 7.1 from gnosis.texi.

INFO-DIR-SECTION Emacs misc features
START-INFO-DIR-ENTRY
* Gnosis (γνῶσις): (gnosis). Spaced Repetition System For Note Taking And Self-Testing.
END-INFO-DIR-ENTRY


File: gnosis.info,  Node: Top,  Next: Introduction,  Up: (dir)

Gnosis User Manual
******************

Gnosis (γνῶσις), pronounced "noh-sis", _meaning knowledge in Greek_, is
a spaced repetition system implementation for note taking and self
testing.

This manual is written for Gnosis version 0.1.5, released on 2023-01-29.

   • Official manual: <https://thanosapollo.org/user-manual/gnosis>
   • Git repositories:
        • main: <https://git.thanosapollo.org/gnosis>
        • sourcehut (mirror): <https://git.sr.ht/~thanosapollo/gnosis>

* Menu:

* Introduction::
* Installation::
* Adding notes::
* Note Types::
* Customization & Extension::

-- The Detailed Node Listing --

Installation

* Using straight.el: Using straightel.
* Installing manually from source::

Note Types

* Cloze::
* Basic Type::
* Double::
* MCQ (Multiple Choice Question)::
* y-or-n::

Customization & Extension

* Adjust string comparison::
* Creating Custom Note Types::
* Customizing Gnosis Algorithm::
* Auto push changes::

Customizing Gnosis Algorithm

* Gnosis Algorithm Initial Interval::
* Gnosis Algorithm Easiness Factor::
* Gnosis Algorithm Forgetting Factor::



File: gnosis.info,  Node: Introduction,  Next: Installation,  Prev: Top,  Up: Top

1 Introduction
**************

Gnosis is a spaced repetition note taking and self testing system, where
notes are taken in a Question/Answer/Explanation-like format & reviewed
in spaced intervals.

   Gnosis can help you better understand and retain the material by
encouraging active engagement.  It also provides a clear structure for
your notes & review sessions, making it easier to study.


File: gnosis.info,  Node: Installation,  Next: Adding notes,  Prev: Introduction,  Up: Top

2 Installation
**************

Gnosis is not currently available in any ELPA, the recommended way to
install gnosis is via straight.el:

   <https://github.com/radian-software/straight.el>

* Menu:

* Using straight.el: Using straightel.
* Installing manually from source::


File: gnosis.info,  Node: Using straightel,  Next: Installing manually from source,  Up: Installation

2.1 Using straight.el
=====================

If you have not installed straight.el, follow the instructions here:

   <https://github.com/radian-software/straight.el>

   Once you have installed straight.el, you can install gnosis using the
following emacs lisp snippet:

     (straight-use-package
      '(gnosis :type git
             :host nil
             :repo "https://git.thanosapollo.org/gnosis"))


File: gnosis.info,  Node: Installing manually from source,  Prev: Using straightel,  Up: Installation

2.2 Installing manually from source
===================================

Gnosis depends on the ‘compat’ & ‘emacsql’ libraries which are available
from MELPA.  Install them using ‘M-x package-install RET <package> RET’
or you may also install them manually from their repository.

   • Clone gnosis repository

          $ git clone https://git.thanosapollo.org/gnosis ~/.emacs.d/site-lisp/gnosis

   • Add this to your emacs configuration

          (add-to-list 'load-path "~/.emacs.d/site-lisp/gnosis")
          (load-file "~/.emacs.d/site-lisp/gnosis/gnosis.el")


File: gnosis.info,  Node: Adding notes,  Next: Note Types,  Prev: Installation,  Up: Top

3 Adding notes
**************

Creating notes for gnosis can be done interactively with: ‘M-x
gnosis-add-note’

   Advanced/Power users may prefer to use ‘gnosis-add-note--TYPE’

   Example:

     (gnosis-add-note--basic :deck "DECK-NAME"
                           :question "Your Question"
                           :answer "Answer"
                           :hint "hint"
                           :extra "Explanation"
                           :image "Image displayed before user-input" ;; Optional
                           :second-image "Image displayed after user-input" ;; Optional
                           :tags '("tag1" "tag2"))

   By default, the value of image and second image is nil.  Their value
must a string, the path of an image, from inside ‘gnosis-images-dir’.

   Each note type has a ‘gnosis-add-note-TYPE’ that is used
interactively & a "hidden function" ‘gnosis-add-note--TYPE’ that handles
all the logic.

   Every note type has these values in common:

   • ‘extra’ string value, extra information/explanation displayed after
     user-input
   • ‘image’ Image displayed _before_ user input
   • ‘second-image’ Image displayed _after_ user input

   The following sections will cover the important differences you have
to know when creating new notes.


File: gnosis.info,  Node: Note Types,  Next: Customization & Extension,  Prev: Adding notes,  Up: Top

4 Note Types
************

* Menu:

* Cloze::
* Basic Type::
* Double::
* MCQ (Multiple Choice Question)::
* y-or-n::


File: gnosis.info,  Node: Cloze,  Next: Basic Type,  Up: Note Types

4.1 Cloze
=========

A cloze note type is a format where you create sentences or paragraphs
with "missing" words.  Almost all note types can be written as a cloze
type in a way.  Ideal type for memorizing definitions.

   To get the most out of gnosis, you have to become familiar with cloze
type notes.

   You can create a cloze note type using ‘M-x gnosis-add-note’ and
selecting ‘Cloze’, the question should be formatted like this:

     {c1:Cyproheptadine} is a(n) {c2:5-HT2} receptor antagonist used to
     treat {c2:serotonin syndrome}

   You can also format clozes like Anki if you prefer; e.g
‘{{c1::Cyproheptadine}}’

   • For each 'cX'-tag there will be created a cloze type note, the
     above example creates 2 cloze type notes.

   • Each 'cX' tag can have multiple clozes, but each cloze must be a
     *UNIQUE* word (or a unique combination of words) in given note.


File: gnosis.info,  Node: Basic Type,  Next: Double,  Prev: Cloze,  Up: Note Types

4.2 Basic Type
==============

Basic note type is a simple question/answer note, where the user first
sees a "main" part, which is usually a question, and he is prompted to
input the answer.


File: gnosis.info,  Node: Double,  Next: MCQ (Multiple Choice Question),  Prev: Basic Type,  Up: Note Types

4.3 Double
==========

Double note type, is essentially a note that generates 2 basic notes.
The second one reverses question/answer.

   Ideal for vocabulary acquisition, creating vocabulary/translation
notes for a foreign language.


File: gnosis.info,  Node: MCQ (Multiple Choice Question),  Next: y-or-n,  Prev: Double,  Up: Note Types

4.4 MCQ (Multiple Choice Question)
==================================

MCQ note type, consists of a "stem" part that is displayed, and
"options" for the user to select the right one.

   Answer must be the index NUMBER of the correct answer from OPTIONS.

   Ideal for self testing & simulating exams


File: gnosis.info,  Node: y-or-n,  Prev: MCQ (Multiple Choice Question),  Up: Note Types

4.5 y-or-n
==========

y-or-n (yes or no) note type, user is presented with a question and
prompted to enter character "y" or "n".

   When using the hidden function ‘gnosis-add-note--y-or-n’, note that
the ANSWER must be either 121 (‘y’) or 110 (‘n’), as those correspond to
the character values used to represent them.


File: gnosis.info,  Node: Customization & Extension,  Prev: Note Types,  Up: Top

5 Customization & Extension
***************************

To make development and customization easier, gnosis comes with
‘gnosis-dev’ module, that should be used to create a custom database for
testing.

   To use ‘gnosis-dev’, first you have to ‘(require 'gnosis-dev)’ & run
‘M-x gnosis-dev-test’.  This will create a new directory 'testing' with
a new database.

   To exit the testing environment, rerun ‘M-x gnosis-dev-test’ and then
enter ‘n’ (no) at the prompt "Start development env?"

* Menu:

* Adjust string comparison::
* Creating Custom Note Types::
* Customizing Gnosis Algorithm::
* Auto push changes::


File: gnosis.info,  Node: Adjust string comparison,  Next: Creating Custom Note Types,  Up: Customization & Extension

5.1 Adjust string comparison
============================

You may adjust ‘gnosis-string-difference’, this is a threshold value for
string comparison that determines the maximum acceptable Levenshtein
distance between two strings, which identifies their similarity

   Let's illustrate with an example:
     (setf gnosis-string-difference 1)

   In this scenario, we set 'gnosis-string-difference' to 1.  This
implies that two strings will be recognized as similar if they exhibit a
difference of at most one character edit.

   To demonstrate, 'example' and 'examples' will be recognized as
similar, considering that the latter involves just one additional
character."


File: gnosis.info,  Node: Creating Custom Note Types,  Next: Customizing Gnosis Algorithm,  Prev: Adjust string comparison,  Up: Customization & Extension

5.2 Creating Custom Note Types
==============================

Creating custom note types for gnosis is a fairly simple thing to do

   • First add your NEW-TYPE to ‘gnosis-note-types’

          (add-to-list 'gnosis-note-types 'new-type)

   • Create 2 functions; ‘gnosis-add-note-TYPE’ &
     ‘gnosis-add-note--TYPE’

   Each note type has a ‘gnosis-add-note-TYPE’ that is used
interactively & a "hidden function" ‘gnosis-add-note--TYPE’ that handles
all the logic.

   Refer to ‘gnosis-add-note-basic’ & ‘gnosis-add-note--basic’ for a
simple example of how this is done.

   • Create ‘gnosis-review-TYPE’

   This function should handle the review process, displaying it's
contents and updating the database depending on the result of the review
(fail/pass).  Refer to ‘gnosis-review-basic’ for an example of how this
should be done.

   • Optionally, you might want to create your own custom
     ‘gnosis-display’ functions


File: gnosis.info,  Node: Customizing Gnosis Algorithm,  Next: Auto push changes,  Prev: Creating Custom Note Types,  Up: Customization & Extension

5.3 Customizing Gnosis Algorithm
================================

* Menu:

* Gnosis Algorithm Initial Interval::
* Gnosis Algorithm Easiness Factor::
* Gnosis Algorithm Forgetting Factor::


File: gnosis.info,  Node: Gnosis Algorithm Initial Interval,  Next: Gnosis Algorithm Easiness Factor,  Up: Customizing Gnosis Algorithm

5.3.1 Gnosis Algorithm Initial Interval
---------------------------------------

‘gnosis-algorithm-interval’ is a list of 2 numbers, representing the
first two initial intervals for successful reviews.

   Example:

     (setq gnosis-algorithm-interval '(1 3))

   Using the above example, after first successfully reviewing a note,
you will see it again tomorrow, if you successfully review said note
again, the next review will be after 3 days.


File: gnosis.info,  Node: Gnosis Algorithm Easiness Factor,  Next: Gnosis Algorithm Forgetting Factor,  Prev: Gnosis Algorithm Initial Interval,  Up: Customizing Gnosis Algorithm

5.3.2 Gnosis Algorithm Easiness Factor
--------------------------------------

‘gnosis-algorithm-ef’ is a list that consists of 3 items.

   The first item is the increase factor, used to increase the easiness
factor upon successful review.

   Second item refers to the decrease factor, used to decrease the
easiness factor upon an unsuccessful review.

   The third item is the initial total easiness factor, used to
calculate the next interval.

   The basic's of how this is used is that it's being multiplied with
the last interval upon a successful review, e.g if you last reviewed a
note 6 days ago, and the easiness factor of this note is 2.0, your next
interval would be 6 * 2.0 & the total easiness factor would be 2.0 +
increase-factor as well.

   Example:

     (setq gnosis-algorithm-ef '(0.3 0.3 1.3))


File: gnosis.info,  Node: Gnosis Algorithm Forgetting Factor,  Prev: Gnosis Algorithm Easiness Factor,  Up: Customizing Gnosis Algorithm

5.3.3 Gnosis Algorithm Forgetting Factor
----------------------------------------

‘gnosis-algorithm-ff’ is a floating number below 1.

   It's used to calculate the next interval upon an unsuccessful review,
by being multiplied with last interval.

   Example:

     (setq gnosis-algorithm-ff 0.5)

   For a note with a value of last-interval of 6 days and a ff of 0.5,
upon an unsuccessful review the next interval will be 6 * 0.5


File: gnosis.info,  Node: Auto push changes,  Prev: Customizing Gnosis Algorithm,  Up: Customization & Extension

5.4 Auto push changes
=====================

When setting ‘gnosis-auto-push’ to ‘t’, at the end of every review
session the changes to ‘gnosis-db’ will be pushed to the pre-configured
push remote.  You have to set your push remote manually.

     (setf gnosis-auto-push t)



Tag Table:
Node: Top246
Node: Introduction1419
Node: Installation1899
Node: Using straightel2268
Node: Installing manually from source2780
Node: Adding notes3469
Node: Note Types4885
Node: Cloze5109
Node: Basic Type6082
Node: Double6360
Node: MCQ (Multiple Choice Question)6706
Node: y-or-n7115
Node: Customization & Extension7541
Node: Adjust string comparison8267
Node: Creating Custom Note Types9063
Node: Customizing Gnosis Algorithm10198
Node: Gnosis Algorithm Initial Interval10540
Node: Gnosis Algorithm Easiness Factor11131
Node: Gnosis Algorithm Forgetting Factor12135
Node: Auto push changes12713

End Tag Table


Local Variables:
coding: utf-8
End: